Jump to content

herbstgy

Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by herbstgy

  1. I think the problem lies somewhere else in your system. I currently use Argus Monitor for fan and RGB control, but I also used FanControl before that. Both of them worked without errors along with Aida on my Asus Rog Strix X670E...
  2. Argus Monitor is better in every regard than FanControl. Not only it can work in parallel with Aida, but also can control your RGB hardware.
  3. 我也没有找到这样的选择。
  4. also, Sensorpanel completely stops until I press OK on the warning message.
  5. Dear Devs, Sensor alerting is indeed a great thing. It's very useful to get notified about too high temperatures or if a fan suddenly stops. However, there's room for improvement. Every time a sensor alert triggers, Aida puts out a standard messagebox in the middle of the main screen, usually BEHIND other windows. Would it be possible to make this warnings more noticeable? To bring it forward? Or direct it to the Windows notification queue?
  6. Dear Devs, would it be possible to detect FPS without RTSS? Through DirectX, for example? (It is visible in the GameBar...) just to run one less program...
  7. I deleted and recreated the element, to see if it helps...
  8. yeah, quite sure.
  9. aidalog_20241029_2024-10-29_10-29-00_log.htm here's the log. I have set the logging frequency to 1 sec (the same as the sensorpanel's), but the dropouts aren't visible in the log. At the same time, there were 4 drops on the sensorpanel. aidalog_20241029_2024-10-29_10-29-00_stat.htm
  10. Hi Fiery, thanks for your answer. I upgraded Aida to 7.40.7100 and also the AMD chipset driver to the newest 6.10.02.1849. It's still doing it, mostly under heavy load.
  11. On the above mainboard, VRM temp signal sometimes left out, is it possible to do anything about it? (it seem under heavy load, the signal leftouts come more often) (The yellow line)
×
×
  • Create New...