ajmch

OK, thank you!

Sure, thank you so much for your willingness to solve this! 💪 You'll find the two dumps attached. The temps were as follow in the IPMI: idle: CPU 37°C | T_Sensor 27°C load: CPU 87°C | T_Sensor 28°C isasensordump_idle.txtisasensordump_load.txt

Thank you Fiery! I attach a pic of the situation after the update. Now, the CPU temp is at 86°C when idle and it needs 100% load for a whole minute to get to 87°C. Via IPMI, I get 36°C when idle. Also, now I can read the T_Sensor measuring the loop temp just before entering the hot section, which is great. But I get 50°C in AIDA64 and 28°C in the IPMI. I also attach a new isa dump. isasensordump_2.txt

Thank YOU! Here is the file. isasensordump.txt P.S. The sensors look normal via IPMI. This is the list I get there: Normal Sensors (24) Sensor Name Reading Behavior +12V 11.940 Volts +3.3V 3.264 Volts +3.3V_ALW 3.248 Volts +5V 4.992 Volts +5V_ALW 4.992 Volts +CPU_1.8V 1.720 Volts +CPU_1.8V_S5 1.790 Volts +CPU_3.3V 3.424 Volts +PCH_CLDO 1.188 Volts +VCORE 0.952 Volts +VDDIO_ABCD 1.332 Volts +VDDIO_EFGH 1.338 Volts +VSOC 1.032 Volts CHA_FAN1 2000 RPM CHA_FAN5 1000 RPM CHIPSET_FAN 1400 RPM CPU Temp. 37 °C CPU_FAN 1600 RPM LAN Temp. 62 °C PCIE01 Temp. 28 °C PCIE07 Temp. 28 °C SOC_FAN 2800 RPM T_Sensor Temp. 27 °C VBAT 3.184 Volts Disabled Sensors (26) DIMMA1 Temp. DIMMB1 Temp. DIMMC1 Temp. DIMMD1 Temp. DIMME1 Temp. DIMMF1 Temp. DIMMG1 Temp. DIMMH1 Temp. PCIE02 Temp. PCIE03 Temp. PCIE04 Temp. PCIE05 Temp. PCIE06 Temp. CPU_OPT CHA_FAN2 CHA_FAN3 CHA_FAN4 CHA_FAN6 PMBPower1 PMBPower2 PSU2 Over Temp PSU2 AC Lost PSU2 Slow FAN1 PSU1 Over Temp PSU1 AC Lost PSU1 Slow FAN1

As above. But the curves of the BIOS are seeing through this and all fans are now at max speed. How can I fix this? P.S. There is no "11°C" temp in HWMonitor (second pic).