[Gigabyte A75-D3H + AMD A6-3670 Wrong Readings]

Yeah, I also think that there is something seriously wrong with those processors, not defective or malfunctionable, but wrongly implemented yes.

 

For example, this is the screenshot from Gigabyte's Touch Bios, where cpu temp reding is again obviously wrong:

 

And this is reading from bios:

 

Bios reading is obviously closer to real state, but it also can't be trusted, as it's not normal to have 23-24 degrees CPU temp.

[Gigabyte A75-D3H + AMD A6-3670 Wrong Readings]

Thanks for assistance, but unfortunately, after the new version update, wrong readings are still there.

The only difference I notice, is that CPU reading is now extremely low, in contrary to last time, when it was too high.

 

Here is the screenshot:

 

I must add that when I'm doing some cpu intensive stuff, the readings seem to be normal, but as soon as computer is back in idle state, readings are falling extremely low, like on screenshot.

[Gigabyte A75-D3H + AMD A6-3670 Wrong Readings]

Thanks for reply.

 

Ok, this is what I'm getting with EasyTune 6, and I'm not even sure that this is correct also.

And as same as with AIDA64, CPU readings are also jumping from 13 to 24 in just few seconds, like when I open Photoshop, and then getting back to 11-13 degrees again.

 

 

And here is sensor debug from AIDA64:

 

------[ AIDA64 v2.80.2300 ]------

------[ Microsoft Windows 7 Professional 6.1.7601.17514 Service Pack 1 (64-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 11/04/2011-Llano-Hudson-7A66HG04C-00
Motherboard Model : Gigabyte GA-A75-D3H
Motherboard Chipset : AMD A75, AMD K12

Award BIOS Type : Award Modular BIOS v6.00PG
Award BIOS Message : GA-A75-D3H F4

DMI MB Manufacturer : Gigabyte Technology Co., Ltd.
DMI MB Product : GA-A75-D3H
DMI MB Version : x.x
DMI MB Serial :
DMI SYS Manufacturer: Gigabyte Technology Co., Ltd.
DMI SYS Product : GA-A75-D3H
DMI SYS Version :
DMI SYS Serial :
DMI BIOS Version : F4

ITE 87xx Port = 2Eh
ITE 87xx HWMonitor Port = 0228h
ITE 87xx Device ID = 8720h
ITE 87xx Version = 08h

Winbond SuperIO Port = 00h
Winbond SuperIO HWMonitor Port = 0000h
Winbond SuperIO Device ID = FFFFh

Fintek SuperIO Port = 00h
Fintek SuperIO HWMonitor Port = 0000h
Fintek SuperIO Device ID = 0000h

LPC47 SuperIO HWMonitor Port = 0000h
LPC47 SuperIO Device ID = FFFFh

------[ LM78 ISA Sensor Device at 0228 ]------

0000 13 10 00 00 FE FF FB 37 FF 87 48 0F 17 DF 39 81
0010 05 FF FF 73 D7 82 80 7F 03 02 02 FF FF FF FF FF
0020 40 5E D5 BD C2 87 87 87 C5 1E 3B 0C 80 F0 F9 F9
0030 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00
0040 7F 7F 7F 7F 7F 7F 5F 74 2D 40 95 00 FF FF FF FF
0050 FF 38 7F 7F 7F D0 00 00 90 80 09 12 60 00 00 00
0060 00 14 41 27 90 03 00 FF 00 14 41 23 90 03 00 FF
0070 00 14 41 20 90 03 00 FF FF FF FF FF FF FF FF FF
0080 FF FF 00 00 FF FF 00 00 02 99 00 00 01 00 E2 0C
0090 FF 00 00 00 FF 00 00 00 FF FF FF FF FF FF FF FF
00A0 8C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0029 002A 002B
T: 30 59 12
T: 30 59 12
T: 30 59 27
T: 30 59 27
T: 30 59 26
T: 30 59 25
T: 30 59 25
T: 30 59 23
T: 30 59 22
T: 30 59 21

Reg$20 CPU Core: r = 64, r*0.016 = 1.02
Reg$21 CPU Aux: r = 94, r*0.016 = 1.50
Reg$22 +3.3 V: r = 213, r*0.016 = 3.41
Reg$23 +5 V: r = 189, r*0.016 = 3.02
Reg$24 +12 V: r = 194, r*0.016 = 3.10
Reg$25 -12 V: r = 135, r*0.016 = 2.16
Reg$26 -5 V: r = 135, r*0.016 = 2.16

------[ Hudson-2/3 PM2 at 0CD0 ]------

0000 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
0010 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
0020 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
0030 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
0040 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0060 1F 00 00 00 00 00 03 00 00 FF FF 03 00 00 FF FF
0070 03 00 00 FF FF 03 00 00 FF FF 03 00 00 FF FF FF
0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0090 01 55 01 00 00 C0 97 00 00 00 00 00 00 00 00 00
00A0 00 00 00 00 00 00 00 00 00 FF FF 00 00 00 00 00
00B0 01 FF 55 55 FF 00 00 FF 00 02 00 00 00 00 00 00
00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00D0 00 00 00 00 00 00 00 00 FF FF FF FF FF 00 FF 00
00E0 03 00 00 00 00 00 02 00 00 FF 81 1F 01 00 00 0A
00F0 19 0A 02 05 C8 20 80 00 05 06 00 00 08 08 00 02

Reg$59VIN0: r = $FFFF, r*0.000046 = 3.0146
Reg$5DVIN1: r = $FFFF, r*0.000046 = 3.0146
Reg$61VIN2: r = $0000, r*0.000046 = 0.0000
Reg$65VIN3: r = $0300, r*0.000046 = 0.0353
Reg$69VIN4: r = $FFFF, r*0.000046 = 3.0146
Reg$6DVIN5: r = $FF00, r*0.000046 = 3.0029
Reg$71VIN6: r = $0000, r*0.000046 = 0.0000
Reg$75VIN7: r = $0003, r*0.000046 = 0.0001

------[ Hudson-2/3 PM at 0CD6 ]------

0000 0E 00 4F 4A 00 04 00 02 34 05 04 02 06 21 43 55
0010 FF 0F 00 00 FF 0F 00 00 00 00 00 00 00 00 00 00
0020 00 00 D1 FE 01 00 D8 FE 25 0B 80 00 01 0B 00 00
0030 00 00 00 00 07 00 C0 FE 0C 00 00 00 00 00 00 00
0040 00 00 00 00 00 00 00 88 F1 00 C0 FE 03 00 00 00
0050 03 00 D0 FE D0 00 00 97 01 FF 15 44 00 05 00 05
0060 00 08 04 08 08 08 10 08 20 08 B0 00 00 FE B8 00
0070 00 00 00 00 17 00 00 4C FF FF 00 00 FF FF E0 80
0080 00 18 26 20 00 00 00 00 00 00 00 00 9E 00 80 00
0090 02 05 02 0B 01 00 10 00 00 10 00 01 00 00 00 00
00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00B0 00 00 8A 00 80 00 05 05 88 00 08 40 02 00 53 C0
00C0 F9 07 58 40 2C 02 00 00 00 40 28 00 F9 FF FF FF
00D0 00 F4 38 BF 00 00 20 00 15 00 99 00 01 00 10 03
00E0 D8 0C 00 00 00 00 00 02 00 00 00 01 03 14 00 CF
00F0 9C 73 07 00 00 00 01 21 6C 07 00 00 00 00 00 00

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP :
_TZ_.THM1._TMP :
_TZ_.THR0._TMP :
_TZ_.THR1._TMP :
_TZ_.TZ00._TMP :
_TZ_.TZ01._TMP :
_TZ_.RTMP :
_TZ_.RFAN :
_TZ_.RFAN(0) :
_TZ_.RFAN(1) :
_SB_.ATKD._HID :
_SB_.ATKD.TMPR :
_SB_.PCI0.LPC0.EC0_.CCTV :
_SB_.PCI0.LPC0.EC0_.LRPM :
_SB_.PCI0.LPC0.EC0_.HRPM :
_SB_.PCI0.SBRG.EC0_.ECPU :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0 :
_SB_.PCI0.SBRG.EC0_.TAH1 :
_SB_.PCI0.SBRG.EC0_.ST00 :
_SB_.PCI0.SBRG.EC0_.SC01 :
_SB_.PCI0.SBRG.EC0_.SC02 :
_SB_.PCI0.SBRG.EC0_.SC03 :
_SB_.PCI0.SBRG.EC0_.SC04 :
_SB_.PCI0.SBRG.EC0_.SC05 :
_SB_.PCI0.SBRG.EC0_.SC06 :
_SB_.PCI0.PIB_.EC0_.TCRT :
_SB_.PCI0.SBRG.EC0_.CTPM :
_SB_.PCI0.SBRG.EC__.CPUT :
_SB_.PCI0.SBRG.EC__.SYST :
_SB_.PCI0.LPC_.EC0_.CTMP :
_SB_.PCI0.LPCB.EC0_.CTMP :
_SB_.PCI0.LPC_.EC0_.TMP1 :
_SB_.PCI0.LPC_.EC0_.TMP2 :
_SB_.PCI0.LPC_.EC0_.TMPI :
_SB_.PCI0.LPC_.EC0_.TMPV :
_SB_.PCI0.LPCB.EC0_.A1TP :
_SB_.PCI0.LPCB.EC0_.A2TP :
_SB_.PCI0.LPCB.EC0_.FAN0 :
_SB_.PCI0.LPCB.EC__.TS1R :
_SB_.PCI0.LPCB.EC__.TS2R :
_SB_.PCI0.LPCB.EC__.TS3R :
_SB_.PCI0.LPCB.EC__.F1FL :
_SB_.PCI0.LPCB.EC__.F1FH :
_SB_.PCI0.LPCB.EC__.F2FL :
_SB_.PCI0.LPCB.EC__.F2FH :
_SB_.PCI0.LPC_.H8EC.RTMP :
_SB_.PCI0.LPC_.H8EC.LTMP :
_SB_.PCI0.LPC_.H8EC.MTMP :
_SB_.PCI0.LPC_.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.CTMP :
_SB_.PCI0.LPCB.H8EC.DTMP :
_SB_.PCI0.LPCB.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.ITMP :
_SB_.PCI0.LPCB.H8EC.MTMP :
_SB_.PCI0.LPCB.H8EC.STMP :
_SB_.PCI0.LPCB.H8EC.PFAN : 

[Gigabyte A75-D3H + AMD A6-3670 Wrong Readings]

Hello, and since this is my first post here, thanks for amazing piece of software.

 

Now, every since I built new system (including mentioned motherboard and processor) I can't get AIDA64 to properly read sensor temps.

I'm getting ridiculously low temps on all 4 separate cores, as you can see from screenshot, while CPU reading is unnaturally high on the other side (60 degrees as soon as I turn on my system).

Also, while leaving AIDA64 activated, I'm seeing extreme core temps fluctuations while doing various tasks, like 15 degrees up and down in just a few seconds.

Like it's reading CPU usage, and not temperatures.

 

Here is the screenshot: