Hi,
I build a new PC with the ASUS P8Z68-V Pro Mainboard with newest BIOS (0902). I put two C300 128 GB SSDs on the Intel SATA2 Ports of this Mainboard as a RAID 1. With Windows 2008 R2 (64 bit). Than I run your Stability test. The test itself works without any problems. After stopping The Test I closed the window. Sometimes thats no problem but often especially after running that test more than 30 min. after closing the Testwindow Aida crashes with an error Box saying: "Access violation at address 0041E6f3 in module 'aida64.exe'. Read of address 00000100." Sometimes the error box comes only one time, sometimes it comes often. The Stability Test itself works ok as long as I dont stop and close the window without any Errors.
First I changed the RAM - the Error still occured
I tried this with Windows 7 64 bit and it occured too.
Then I usered less options (Test only CPU for example) - the Error still occured
Then I tried the Intel SATA G6 Port - the Error still occured
Then I tried differnt SSDs (Samsung 830) - the error still occured
Then I tried the the Marvell Controller on the board - I run the System on that controller for about 10h without an Error
So I thought that its a Problem of the Intel Controller.
Because I need all SATA Conntectors of the Board I tried now a different Mainboard:
MSI Z68A-GD65 (G3)
I connected the SSDs to this board without reinstalling - the error occured
Now I don't know what I could do else. Do have all Intel SATA controllers an Error? Or is there an Error in your Programm?
Please help.
P. S.
One additional Information: With the Asus Board I and some people in a differnt forum get after starting the stability test and waiting a few a few minutes the following Error in the System Eventlog:
Protokollname: System
Quelle: ACPI
Datum: 14.11.2011 20:13:25
Ereignis-ID: 15
Aufgabenkategorie:Keine
Ebene: Warnung
Schlüsselwörter:Klassisch
Benutzer: Nicht zutreffend
Computer: xxxx
Beschreibung:
: Der eingebettete Controller (EC) hat Daten zurückgegeben, als keine Daten angefordert wurden. Möglicherweise versucht das BIOS, auf den EC zuzugreifen, ohne mit dem Betriebssystem zu synchronisieren. Diese Daten werden ignoriert. Es ist keine weitere Aktion erforderlich. Sie sollten jedoch den Computerhersteller nach einem aktualisierten BIOS fragen.
I think I can savly ignore that because it says so in the message part "Beschreibung"
With the MSI Board I don't get this Error.