Jump to content

jjxaker

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by jjxaker

  1. I do not use utilities from Asus (including AI Suite) Perhaps it is worth making a separate option to enable monitoring "Preferences/Stability/Asus Embedded Controller Support"?
  2. Hi! Please add readings of sensors DIMM.2 ambient temp. ps. Full report sent through built-in tools.
  3. Great, it's okay. I sent a full report through Aida64. Now it is already possible)) Thank you for your work! MSI_smbus_test.txt
  4. you did not receive a letter from my mail service? I immediately sent you an answer. same problem, this time B00-D21/Reg 0061
  5. Problem still exists, already another address. And another problem:
  6. B00-D1E/Reg 00D1 , And set off a sharp switch-off
  7. Unfortunately they communicate with them is difficult... I can not even Make the SMBus dump(Full), the system itself turns off
  8. EIST disabling It helps. But this is a bad way out of the situation))) Miracles are what by the way vid and vcore equaled after turning EIST off
  9. There are no problems NB clock with Asus Z170/Z270, in contrast to MSI Z170/Z270 Series... I tried the boards MSI Z170 Gaming M3/M5/M7/M9 and Z270 Gaming M5/M7 with all of them the frequency of the north bridge is read incorrectly. This may be the problem due to bios? I pulled out the video card(EVGA GTX 1070 FTW) and the problem disappeared. At least I can not reproduce the situation with the problem... ps. But is it right that it is indicated that there is not present thermal sensor? Because it is available, Giantec GT34TS04 CPU-Z when there was a problem not always read the data SPD... Now for now everything is fine
  10. asusspddump_test1.txt asusspddump_test2.txt And how about the problem with NB Clock? This is a problem with MSI only.
  11. Yes, north bridge clock he always shows like that.
  12. Thank you! new beta 5.80.4084 solved the problem of monitoring the voltage. I have a question about Cache & Memory Benchmark, incorrectly displays the frequency North Bridge Clock. but this problem has long.
  13. Need to replace the VCORE on VID. VID is always less than VCORE
  14. Thank you, I hope you and MSI will find the truth with. Temporarily, and so will come down, true looks CPU VID of reading more than vCore
  15. Software and utility from manufacturers always been crap, how to use them! it is for housewives))) but monitoring is working properly.
  16. any other software reads correctly... in the BIOS manually voltage 1.360 PS. lacks +3 V the same problem with the ASUS PRIME Z270-K cpu vid read exactly what is needed! cpu core voltage 1.144 It shows the nonsense.
  17. Hello! Bug reading vcore, It displays an incorrect value. I wanted to create a aida64 full report, but in reading SMBus dump(full) my system herself shuts down. but this is clearly a problem of the aida64... isasensordump.txt
  18. jjxaker

    Icons

    Please, correct the display icons style win7. always works only ugly win10 style. two beta versions ago broke
  19. yes, always the same value 3500, in any manipulation. the only problem is Cache & Memory Benchmark. More probably need the same to someone checked, except me
  20. Yes, but In the old version Aida64 5.75.3908 with these problems were not. I have also used a dynamic NB Clock before 4300Mhz. For the rest my questions i understood, thanks you for the clarification.
  21. Something broke and there a small bug: PS. I'm sorry, can create a new topic is not necessary?, I still had a couple of questions... Is it possible to add to the TOOLS / AIDA64 CPUID data such as??? : CPU VID (below core voltage) CPU Microcode Revision (below CPUID Rev.) Sensor Properties / Motherboard Name, instead: MSI MS-7966/7968/7970/7971/and so on. very much... / replaced by normal names boards, in my case MSI Z170A Gaming M7 (MS-7976) In chapter DirectX / DirectX Video / Direct3D Device Properties / DirectX Hardware Support: for some reason, reports about support only version 11.1(for a long time is not right reads) despite the fact that the supported version is up to DX ver 12.1(system win10) Once again I'm sorry if I strain. Just want to share ideas that would come in handy and will add convenience.
  22. Many thanks! Everything works perfectly!!! Aida64 The best program for monitoring, I believe that she should not have analogues
  23. Well, of course I will wait glad that the problem will be corrected. Full reading all the timings can be realized ? :
  24. Greetings! Faced with the problem of the not correct reading of the values of the secondary timings... Aida64 or reads too much or not all, timings tWTR =34 where such data
  25. Thank you for the clarification. System Agent Clock- monitoring it works correctly! Once again, thank you very much!
×
×
  • Create New...