Jump to content
AIDA64 Discussion Forum

stillwater

Members
  • Content Count

    15
  • Joined

  • Last visited

Posts posted by stillwater


  1. My sensor panel occasionally moves from my left monitor, where I want it to be, to another monitor. Sometimes this is because some software forcibly changed my resolution or turned off monitors. Sometimes it's because a monitor cable fell out or got bumped. When this happens, it's quite tedious to get it to the same spot again, since I have the sensor panel position "locked". I have to:

    • open aida
    • go to preferences
    • find the sensor panel section
    • uncheck "lock position"
    • close aida preferences (because the sensor panel can't be moved while the preferences are open)
    • move the sensor panel to where I want it to be
    • open aida again
    • go to preferences again
    • find the sensor panel section again
    • check "lock position"
    • close aida

    I wish there was an option to lock/unlock panel position when I right-click the sensor panel itself. That would make the process so much easier.


  2. 16 hours ago, Fiery said:

    Asus motherboards could operate with a very high EC (Embedded Controller) latency that would cause AIDA64 sensor module to load the CPU for several milliseconds.  You can check if your motherboard is affected by that anomaly by disabling EC support in AIDA64 / main menu / File / Preferences / Stability.  Make sure to restart AIDA64 after altering that option.  Also note that by disabling EC support you will lose a few sensor readings like CPU OPT fan RPM.

    Yep, that seems to have done the trick! :) As soon as I disable that option (even before restarting Aida), the CPU usage goes way down. It now hovers at <1% and very occasionally peaks at ~1.5%. 

    When I rerun the Sensor Profiling Dump, GPUSensorInfo is still high, but LM78 is now about 50 times lower (0.148 instead of 7.9). 

    My sensor panel did have CPU Opt RPM on it, which has now stopped working as you said (it's no big deal). I can't see any other changes in the sensor panel. Can I assume that, apart from CPU Opt RPM, disabling EC support will have negligible impact for me in AIDA64? 

    Also, is this high EC latency something that I should be concerned about? Is it likely to impact my general PC performance? Is it a sign of a faulty motherboard?


  3. Embedded Controller dump: 

     

     

    ------[ Versions ]------

    Program Version : AIDA64 Extreme v5.99.4900
    BenchDLL Version: 4.3.793-x64
    Windows Version : Microsoft Windows 10 Pro 10.0.17763.253 (64-bit)

    ------[ Motherboard Info ]------

    Motherboard ID      : <DMI>
    Motherboard Model   : Asus Prime Z390-A
    Motherboard Chipset : Intel Cannon Point Z390, Intel Coffee Lake-S

    DMI MB Manufacturer : ASUSTeK COMPUTER INC.
    DMI MB Product      : PRIME Z390-A
    DMI MB Version      : Rev 1.xx
    DMI MB Serial       : 181037805502187
    DMI SYS Manufacturer: System manufacturer
    DMI SYS Product     : System Product Name
    DMI SYS Version     : System Version
    DMI SYS Serial      : System Serial Number
    DMI BIOS Version    : 0702

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #0 ]------

    0000  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0010  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0020  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0030  00 00 00 00  00 00 00 00  00 00 46 29  20 D8 28 00  ..........F) .(.
    0040  7C 00 00 0C  00 00 00 00  00 00 00 00  00 00 00 00  |...............
    0050  00 00 00 00  00 0A 0A 00  00 00 00 00  00 00 00 00  ................
    0060  80 80 80 22  20 00 00 00  07 00 00 00  00 00 00 00  ..." ...........
    0070  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0090  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  02 7F 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ...............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  40 00 10 41  00 00 00 00  33 33 44 43  00 00 04 01  @..A....33DC....
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 CC 0C 08  0F 00 00 00  00 00 00 00  00 DD 08 00  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #1 ]------

    0000  0A 15 1B 1E  00 00 00 00  47 D8 20 1D  00 00 00 00  ........G. .....
    0010  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0020  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0030  00 00 00 00  00 00 00 00  02 08 62 78  03 18 1E 1F  ..........bx....
    0040  03 20 02 A8  00 06 00 00  00 3F 04 E7  00 70 00 17  . .......?...p..
    0050  00 42 00 00  00 00 00 00  01 29 25 ED  01 08 00 00  .B.......)%.....
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0090  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 00 00 00  00 00 01 54  00 78 00 D2  01 54 00 78  .......T.x...T.x
    00C0  00 00 01 90  00 C8 00 F0  01 90 00 C8  00 F0 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  01 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  0F 00 00 00  00 00 00 00  EC 00 00 00  00 00 00 01  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #2 ]------

    0000  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0010  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0020  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0030  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0040  00 00 00 00  00 00 00 00  00 00 01 00  00 00 00 00  ................
    0050  09 00 00 00  00 00 00 00  01 00 00 00  00 00 00 00  ................
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0090  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 02  ................
    00C0  00 15 00 43  E8 02 00 00  00 00 00 00  00 00 00 00  ...C............
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 02  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #3 ]------

    0000  03 60 02 CD  02 A7 02 8C  02 84 01 52  01 F8 FF FF  .`.........R....
    0010  01 47 03 FD  02 86 02 87  FF FF FF FF  FF FF 02 89  .G..............
    0020  02 89 02 8A  02 87 02 86  00 98 00 A8  00 98 00 60  ...............`
    0030  00 C0 00 00  00 A8 00 00  00 00 00 00  01 20 01 20  ............. .
    0040  01 30 00 D0  01 40 01 FF  01 80 01 FF  01 FF 01 FF  .0...@..........
    0050  00 90 00 70  00 30 00 50  00 A0 00 00  00 70 00 00  ...p.0.P.....p..
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 C0 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  01 FF 01 FF  01 FF 01 FF  01 FF 01 FF  ................
    0090  01 FF 01 FF  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 70 00 00  00 00 00 00  00 00 00 00  00 00 00 00  .p..............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 03  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #4 ]------

    0000  03 2A 02 CC  02 A0 02 8E  02 85 01 52  01 E1 FF FF  .*.........R....
    0010  01 47 03 FD  02 BA 02 97  FF FF FF FF  FF FF 02 88  .G..............
    0020  02 88 02 88  02 88 02 86  00 98 00 A8  00 98 00 60  ...............`
    0030  00 C0 00 00  00 A8 00 00  00 00 00 00  01 20 01 20  ............. .
    0040  01 30 00 0C  01 40 01 FF  01 80 01 FF  01 FF 01 FF  .0...@..........
    0050  00 90 00 70  00 30 00 50  00 A0 00 00  00 70 00 00  ...p.0.P.....p..
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 C0 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  01 FF 01 FF  01 FF 01 FF  01 FF 01 FF  ................
    0090  01 FF 01 FF  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 70 00 00  00 00 00 00  00 00 00 00  00 00 00 00  .p..............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 03  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #5 ]------

    0000  03 2B 02 DE  02 A7 02 8D  02 84 01 52  01 F7 FF FF  .+.........R....
    0010  01 47 03 FD  02 4A 02 96  FF FF FF FF  FF FF 02 8B  .G...J..........
    0020  02 8A 02 88  02 87 02 87  00 98 00 A8  00 98 00 60  ...............`
    0030  00 C0 00 00  00 A8 00 00  00 00 00 00  01 20 01 20  ............. .
    0040  01 30 00 0C  01 40 01 FF  01 80 01 FF  01 FF 01 FF  .0...@..........
    0050  00 90 00 70  00 30 00 50  00 A0 00 00  00 70 00 00  ...p.0.P.....p..
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 C0 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  01 FF 01 FF  01 FF 01 FF  01 FF 01 FF  ................
    0090  01 FF 01 FF  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 70 00 00  00 00 00 00  00 00 00 00  00 00 00 00  .p..............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 03  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #6 ]------

    0000  03 5F 02 CC  02 A0 02 8C  02 86 01 52  01 F8 FF FF  ._.........R....
    0010  01 47 03 FD  02 B8 02 96  FF FF FF FF  FF FF 02 8F  .G..............
    0020  02 8B 02 88  02 88 02 86  00 98 00 A8  00 98 00 60  ...............`
    0030  00 C0 00 00  00 A8 00 00  00 00 00 00  01 20 01 20  ............. .
    0040  01 30 00 0C  01 40 01 FF  01 80 01 FF  01 FF 01 FF  .0...@..........
    0050  00 90 00 70  00 30 00 50  00 A0 00 00  00 70 00 00  ...p.0.P.....p..
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 C0 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  01 FF 01 FF  01 FF 01 FF  01 FF 01 FF  ................
    0090  01 FF 01 FF  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 70 00 00  00 00 00 00  00 00 00 00  00 00 00 00  .p..............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 03  ................

    ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #7 ]------

    0000  03 61 02 DF  02 A8 02 8C  02 86 01 52  01 F7 FF FF  .a.........R....
    0010  01 47 03 FD  02 86 02 86  FF FF FF FF  FF FF 02 8B  .G..............
    0020  02 8B 02 89  02 87 02 86  00 98 00 A8  00 98 00 60  ...............`
    0030  00 C0 00 00  00 A8 00 00  00 00 00 00  01 20 01 20  ............. .
    0040  01 30 00 0C  01 40 01 FF  01 80 01 FF  01 FF 01 FF  .0...@..........
    0050  00 90 00 70  00 30 00 50  00 A0 00 00  00 70 00 00  ...p.0.P.....p..
    0060  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0070  00 C0 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    0080  00 00 00 00  01 FF 01 FF  01 FF 01 FF  01 FF 01 FF  ................
    0090  01 FF 01 FF  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00A0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00B0  00 70 00 00  00 00 00 00  00 00 00 00  00 00 00 00  .p..............
    00C0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00D0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00E0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  ................
    00F0  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 03  ................

    Time #1 = 5922 msec
    Time #3 = 0.281 / 0.276 / 0.285 / 0.252 / 407.217 / 0.256 / 0.248 / 0.278 / 0.249 / 408.921 / 0.255 / 0.268 / 0.293 / 0.263 / 413.320 / 0.267 msec
     


  4. Thanks for your attention, Fiery. Here's the Sensor ProfilingDump. Looks like GPU and LM78 are the main culprits?

     

     

    ------[ Versions ]------

    Program Version : AIDA64 Extreme v5.99.4900
    BenchDLL Version: 4.3.793-x64
    Windows Version : Microsoft Windows 10 Pro 10.0.17763.253 (64-bit)

    ------[ Motherboard Info ]------

    Motherboard ID      : <DMI>
    Motherboard Model   : Asus Prime Z390-A
    Motherboard Chipset : Intel Cannon Point Z390, Intel Coffee Lake-S

    DMI MB Manufacturer : ASUSTeK COMPUTER INC.
    DMI MB Product      : PRIME Z390-A
    DMI MB Version      : Rev 1.xx
    DMI MB Serial       : 181037805502187
    DMI SYS Manufacturer: System manufacturer
    DMI SYS Product     : System Product Name
    DMI SYS Version     : System Version
    DMI SYS Serial      : System Serial Number
    DMI BIOS Version    : 0702

    ------[ Video Adapters ]------

    MSI GTX 980 Ti (MS-V323) [10DE-17C8 / 1462-3232]
    MSI GTX 980 Ti (MS-V323) [10DE-17C8 / 1462-3232]

    ------[ Video Driver ]------

    nvapi.dll: 25.21.14.1735 - nVIDIA ForceWare 417.35

    C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll
    C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll
    C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll
    C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll

    ------[ Sensor Profiling (Init) ]------

    SensorInfo        :   81.204 ms
    GPUSensorInfo     :   15.719 ms
    GPU01 / NV Diode  :    0.004 ms
    GPU01 / NV Fan PWM:    0.655 ms
    GPU02 / NV Diode  :    0.004 ms
    GPU02 / NV Fan PWM:    0.563 ms
    HDD               :    0.135 ms
    SPD               :    0.732 ms
    AMB               :    0.001 ms
    Asus EPU2         :    0.000 ms
    Asus EPU1         :    0.000 ms
    nVIDIA SPP        :    0.000 ms
    nVIDIA MCP        :    0.000 ms
    Intel GMCH        :    0.000 ms
    Intel PCH         :    0.000 ms
    Intel SNB         :    0.026 ms
    Zambezi           :    0.000 ms
    Kaveri            :    0.000 ms
    Zen               :    0.000 ms
    AMD SVI2          :    0.000 ms
    MTC0303           :    0.000 ms
    Smart Battery     :    0.000 ms
    HID UPS           :    0.000 ms
    TVALZ             :    0.000 ms
    T-Balancer        :    0.000 ms
    Asetek LC         :    0.000 ms
    Kraken X42        :    0.000 ms
    Riing+            :    0.000 ms
    LM78              :    7.808 ms
    TT DPS            :    0.000 ms
    Digifanless       :    0.000 ms
    Corsair RMi       :    0.000 ms
    Corsair AXi       :    0.000 ms
    Odin              :    0.000 ms
    Aquaero           :    0.000 ms

    ------[ Sensor Profiling (Last) ]------

    SensorInfo        :   81.756 ms
    GPUSensorInfo     :   16.498 ms
    GPU01 / NV Diode  :    0.004 ms
    GPU01 / NV Fan PWM:    0.693 ms
    GPU02 / NV Diode  :    0.004 ms
    GPU02 / NV Fan PWM:    0.812 ms
    HDD               :    0.129 ms
    SPD               :    0.716 ms
    AMB               :    0.001 ms
    Asus EPU2         :    0.000 ms
    Asus EPU1         :    0.000 ms
    nVIDIA SPP        :    0.000 ms
    nVIDIA MCP        :    0.000 ms
    Intel GMCH        :    0.000 ms
    Intel PCH         :    0.000 ms
    Intel SNB         :    0.025 ms
    Zambezi           :    0.000 ms
    Kaveri            :    0.000 ms
    Zen               :    0.001 ms
    AMD SVI2          :    0.000 ms
    MTC0303           :    0.000 ms
    Smart Battery     :    0.000 ms
    HID UPS           :    0.000 ms
    TVALZ             :    0.000 ms
    T-Balancer        :    0.000 ms
    Asetek LC         :    0.000 ms
    Kraken X42        :    0.000 ms
    Riing+            :    0.000 ms
    LM78              :    7.987 ms
    TT DPS            :    0.000 ms
    Digifanless       :    0.000 ms
    Corsair RMi       :    0.000 ms
    Corsair AXi       :    0.000 ms
    Odin              :    0.000 ms
    Aquaero           :    0.000 ms
     


    1. Open a sensor panel with a good number of items in it (eg. 5 or more)
    2. click on an item near the top
    3. click "move down" at least a few times, to move the item down the list
    4. now shift-click on an above item 

    Shift-click of course selects consecutive items. But you'll see that Aida selects consecutive items from the original position of your selected item (starting near the top, downwards) instead of its actual position (its new position, upwards).


  5. Hi,

    I've used Aida64 for the Sensor Panel for many years. But after upgrading my PC*, I've noticed that Aida64 uses a relatively high amount of CPU (often hovering around 5%, sometimes hitting 10+%. Perhaps it always used so much but I've only noticed now.

     

    Anyway, the CPU usage seems unrelated to what's actually on the sensor panel: it behaves the same whether it has 0 items on it or 100.  Though it does improve if I set transparency to 0%. And it does dip below 1% if the sensor panel is turned off completely by unchecking "show sensor panel" (as opposed to just hidden by setting all items to "hide"). It also seems to be pretty much unaffected by whether the polling rate is 100ms or 2000ms. 

     

    So I have 2 questions:

     

    1. Are there certain settings I can change in Aida64 that would reduce CPU usage? I only use the sensor panel and logitech g510s lcd panel (I don't even use the main aida64 window). So I'd be happy to disable anything that doesn't relate to those. Could I disable something in the stability section perhaps? 

    2. Is the 5-10% cpu usage actually a problem if I don't max out my CPU to 100%?  I'm a photoshop power-user, which frequently works my CPU and RAM hard, but it usually only maxes out one or two cores (my CPU has 8 physical cores). My understanding is that, in theory at least, if Photoshop maxes out, say, cores 1 and 2, then the CPU will just shift Aida64's workload to core 3, and Photoshop's performance would remain unharmed. Is this how it works in reality?

     

    Thanks

     

    *  Asus Prime z390-a; core i7-9700k; 64gb ram; two gtx980ti in SLI; two m.2 drives; six sata drives


  6. The Monitor Refresh Rate sensor doesn't seem to work properly, at least in my case. 

    My monitor (ASUS ROGswift PG287Q) has a physical button that switches between 60Hz/120Hz/144Hz. The button works without a hitch. I can see the refresh rate changing with my naked eye (noticeable change in smoothness) and by looking at a game's framerate while vsync is on (the FPS will max out at 60fps/120fps/144fps depending on refresh rate). The monitor itself also pops up a HUD that confirms the changed Hz value.

    But the Aida64 sensor doesn't pick up this change. It seems the problem may be at least partly to do with Windows' Display Adapter Properties (DAP), as Aida64 appears to only read the setting that is in DAP (shown below). If I change the Hz here, then Aida does update correctly (it also updates correctly if I change the Hz via the nvidia control panel). However, if I subsequently press the button on my monitor to change refresh rate, then the monitor does switch to the new refresh rate, but neither DAP or Aida are updated to reflect this new refresh rate.

    Is there any way to make Aida's Vertical Refresh Rate setting more accurate, to reflect the actual refresh rate (and not just what Windows thinks it is)?

    Thanks

     

    2EH1awD


  7. oh, ok. I assumed you could do it since you do it with the gadget. Btw, why are the gadget and sensor panel separate things? Is the gadget architecture too limited to do what the sensor panel can do?

     

    Anyway, Aero Peek would be nice, since it's exactly the sort of thing that Aero Peek was designed for, but I can live without it. I'm happy enough to be able to see it with "show desktop"


  8. ah, dammit, I just found a bug. The new no-minimise functionality doesn't work on "Aero Peek" (hovering over the "show desktop" corner button without clicking it) in Windows 7. This is actually the most important situation for the sensor panel to remain visible in my opinion, because it would let you quickly see your stats and then get immediately back to work

     

    Looks like I spent my $40 too soon :/


  9.  

    (12) Stop the sensor panel disappearing when I do "Show Desktop". This is probably my greatest annoyance with aida. When my monitors are full of open windows, I'd like to be able to click the Windows "Show desktop" button to quickly check something on the Sensor Panel.  But currently, the Sensor Panel disappears along with all the other windows. A "keep visible on Show Desktop" checkbox would be great. I know the "always on top" feature exists, but I definitely don't want the SP to be always on top (just always visible when looking at the desktop)

     

     

    Could someone please tell me if this has this been fixed yet? My license period expired, so I no longer have updates. I'm deciding whether to renew, as this is the main feature I'm interested in at the moment.


  10. Thanks for responding/considering my suggestions.  

     

    (8) Seems like a lost opportunity to me. I'd love to have aida as my one-stop-shop for all hardware monitoring and tweaking. I'd prefer not to have to run multiple utilities at once. Also, the UI of SpeedFan (the current best program for controlling fans) is very complicated and unintuitive. I'm sure you could implement a better one, and I'd expect you to get more customers if you did, as many of us use Speedfan only because there's no alternative. Though I guess you know what's best for your roadmap.

     

    (9) Are you sure? I find that settings only save for the current session only unless I manually quit aida. I've noticed a few times when I've made changes, they've been applied....but then later I've restarted Windows (without manually closing aida), and upon re-entering Windows, the changes I had made had been lost. If I manually close aida after making changes, they seem to be saved permanently.

     

     

     

     

    Anyway, I have a few more suggestions:

     

    (11) Monitor HDD activity  Sometimes I can hear one of my hard drives spinning loudly, but I have no idea why, or which one it is. I wish I could just look at my aida sensor panel and see straight away which one it is (and perhaps whether it's reading or writing)

     

    (12) Stop the sensor panel disappearing when I do "Show Desktop". This is probably my greatest annoyance with aida. When my monitors are full of open windows, I'd like to be able to click the Windows "Show desktop" button to quickly check something on the Sensor Panel.  But currently, the Sensor Panel disappears along with all the other windows. A "keep visible on Show Desktop" checkbox would be great. I know the "always on top" feature exists, but I definitely don't want the SP to be always on top (just always visible when looking at the desktop)

     

    (13) Allow drag-drop of items on the sensor panel manager. I currently have about 80 items on my SP. Keeping organised by arranging them is very time-consuming, because the "move up/down" buttons only move them one position at a time. I'd like to be able to just drag them into any position on the list I want.

     

    (14) Be able to show refresh rates for multiple monitors. I have 2 monitors, with different refresh rates that sometimes change independently of each other. Aida's current "Refresh Rate" sensor isn't very helpful, because it only works for one monitor (and it's not immediately apparent which one).

     

    (15) Allow monitoring of estimated Power Draw (in Watts) of GPUs, and not just their TDP%

     

     

     

    Thanks again.



  11. Hi, first of all I want to say how impressed I am with aida64. I've used it since about 2009 to display sensor stats on my logitech keyboard LCD. I've recently started using it for more, such as sensor panels on both my PCs and stability tests, and I'm loving it. I keep discovering more features, and the more I discover about the program, the more impressed I am. Great work.
     

    Anyway, even good things can be improved, and I have some suggestions.

    1. allow hard drives with A: or B: letters to be monitored eg. my backup hard drive was called B: (B for Backup), but unfortunately Aida didn't recognise it until I renamed to a different letter
    2. allow moving of sensor elements even when sensor manager is open
    3. allow user to customise value types: eg. let me choose whether to display 1546 Mhz, 1.546 Ghz, 1.55 Ghz or 1.5 Ghz
    4. allow cpu, chassis etc. fans to be displayed not just as rpm, but also as a percentage value (ie.  Full speed = 100%). Make user input min and max if necessary
    5. allow graphs to be capped, so that line doesn't go off the chart. Eg. My Fraps graph makes most sense when capped at 120hz. But when I play an older game with vsync off, the fps can be much higher, and the line shoots off the graph and messes up the rest of the sensor panel.
    6. let sensor panel manager window remember its last location
    7. Allow values to have multiple colour states, just like bars do at the moment: eg. CPU temparature:  30ËšC  or  55ËšC  or 96ËšC
    8. Allow fan speeds to be controlled. Perhaps introduce a new "Item Type" called Slider or Button or Interactive
    9. Save settings when closing preferences or Sensor Panel manager, not just when closing aida64.
    10. Allow each item on sensor panel to have its own polling interval setting that overrides the generic ones. Eg. I'd like to poll Fraps framerate every 0.1 seconds, GPU usage every 1 second, "used RAM" every 5 seconds, motherboard temperature every 30 seconds, and "used HDD space" every 360 seconds. Everything else can be left at the defaults that I've specified in preferences.
×
×
  • Create New...