stillwater

In case it helps: https://www.nuget.org/packages/StreamDeck-Tools/

Just a few thoughts: ~30° is very low. I don't think I've ever seen my CPUs that low. ~50° seems quite acceptable for idle to me. 12-16% is not really idle. When my CPU is idle it's in low single figures. Sounds like you have some hungry programs running. Even 12-16% of a single core is more than what I'd call idle. If you mean 12-16% of total CPU, then that's like more than a full core of your 10-core CPU. No way you can expect 30° with that kind of workload. I don't know what GT cores means, but maybe it's measuring something other than the 12-15% that's being used.

I also need something like this, but way smaller than 5". I've already got a huge sensor panel on my third monitor (on desktop, hidden behind windows usually) when I need detailed info. I also want something for basic info that I can check with a glance; something with a tiny footprint that I can put near my line of sight. I've always used the LCD on my logitech g510s keyboard for this, and it was just perfect. It's only 5x2cm or so, but that was enough to fit ram, vram, net traffic, uptime, 2 GPUs, 8 cpu cores, temps, fps and more! Alas, my keyboard is dying and no one seems to make good LCD keyboards anymore. So I'd like to find some tiny little screen r that I can stick somewhere nearby (maybe even literally, eg. with blutak to a shelf edge ). Even as small as 1x3cm or so would be fine. The smaller the better, really. Any suggestions?

I would love this. For 10 years I've routinely checked my keyboard's LCD to see my PC's current CPU load, FPS, RAM level, etc. It's a fantastically useful convenience. But my keyboard is dying and I've had to replace it with a non-LCD keyboard. :( If I could put some of the info on my Stream Decks, it would at least make my withdrawal symptoms less painful :D

My sensor panel occasionally moves from my left monitor, where I want it to be, to another monitor. Sometimes this is because some software forcibly changed my resolution or turned off monitors. Sometimes it's because a monitor cable fell out or got bumped. When this happens, it's quite tedious to get it to the same spot again, since I have the sensor panel position "locked". I have to: open aida go to preferences find the sensor panel section uncheck "lock position" close aida preferences (because the sensor panel can't be moved while the preferences are open) move the sensor panel to where I want it to be open aida again go to preferences again find the sensor panel section again check "lock position" close aida I wish there was an option to lock/unlock panel position when I right-click the sensor panel itself. That would make the process so much easier.

Yep, that seems to have done the trick! As soon as I disable that option (even before restarting Aida), the CPU usage goes way down. It now hovers at <1% and very occasionally peaks at ~1.5%. When I rerun the Sensor Profiling Dump, GPUSensorInfo is still high, but LM78 is now about 50 times lower (0.148 instead of 7.9). My sensor panel did have CPU Opt RPM on it, which has now stopped working as you said (it's no big deal). I can't see any other changes in the sensor panel. Can I assume that, apart from CPU Opt RPM, disabling EC support will have negligible impact for me in AIDA64? Also, is this high EC latency something that I should be concerned about? Is it likely to impact my general PC performance? Is it a sign of a faulty motherboard?

Embedded Controller dump: ------[ Versions ]------ Program Version : AIDA64 Extreme v5.99.4900 BenchDLL Version: 4.3.793-x64 Windows Version : Microsoft Windows 10 Pro 10.0.17763.253 (64-bit) ------[ Motherboard Info ]------ Motherboard ID : <DMI> Motherboard Model : Asus Prime Z390-A Motherboard Chipset : Intel Cannon Point Z390, Intel Coffee Lake-S DMI MB Manufacturer : ASUSTeK COMPUTER INC. DMI MB Product : PRIME Z390-A DMI MB Version : Rev 1.xx DMI MB Serial : 181037805502187 DMI SYS Manufacturer: System manufacturer DMI SYS Product : System Product Name DMI SYS Version : System Version DMI SYS Serial : System Serial Number DMI BIOS Version : 0702 ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #0 ]------ 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0030 00 00 00 00 00 00 00 00 00 00 46 29 20 D8 28 00 ..........F) .(. 0040 7C 00 00 0C 00 00 00 00 00 00 00 00 00 00 00 00 |............... 0050 00 00 00 00 00 0A 0A 00 00 00 00 00 00 00 00 00 ................ 0060 80 80 80 22 20 00 00 00 07 00 00 00 00 00 00 00 ..." ........... 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 02 7F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ............... 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 40 00 10 41 00 00 00 00 33 33 44 43 00 00 04 01 @..A....33DC.... 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 CC 0C 08 0F 00 00 00 00 00 00 00 00 DD 08 00 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #1 ]------ 0000 0A 15 1B 1E 00 00 00 00 47 D8 20 1D 00 00 00 00 ........G. ..... 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0030 00 00 00 00 00 00 00 00 02 08 62 78 03 18 1E 1F ..........bx.... 0040 03 20 02 A8 00 06 00 00 00 3F 04 E7 00 70 00 17 . .......?...p.. 0050 00 42 00 00 00 00 00 00 01 29 25 ED 01 08 00 00 .B.......)%..... 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 00 00 00 00 00 01 54 00 78 00 D2 01 54 00 78 .......T.x...T.x 00C0 00 00 01 90 00 C8 00 F0 01 90 00 C8 00 F0 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 0F 00 00 00 00 00 00 00 EC 00 00 00 00 00 00 01 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #2 ]------ 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0040 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ 0050 09 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 ................ 00C0 00 15 00 43 E8 02 00 00 00 00 00 00 00 00 00 00 ...C............ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #3 ]------ 0000 03 60 02 CD 02 A7 02 8C 02 84 01 52 01 F8 FF FF .`.........R.... 0010 01 47 03 FD 02 86 02 87 FF FF FF FF FF FF 02 89 .G.............. 0020 02 89 02 8A 02 87 02 86 00 98 00 A8 00 98 00 60 ...............` 0030 00 C0 00 00 00 A8 00 00 00 00 00 00 01 20 01 20 ............. . 0040 01 30 00 D0 01 40 01 FF 01 80 01 FF 01 FF 01 FF .0...@.......... 0050 00 90 00 70 00 30 00 50 00 A0 00 00 00 70 00 00 ...p.0.P.....p.. 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................ 0090 01 FF 01 FF 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .p.............. 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #4 ]------ 0000 03 2A 02 CC 02 A0 02 8E 02 85 01 52 01 E1 FF FF .*.........R.... 0010 01 47 03 FD 02 BA 02 97 FF FF FF FF FF FF 02 88 .G.............. 0020 02 88 02 88 02 88 02 86 00 98 00 A8 00 98 00 60 ...............` 0030 00 C0 00 00 00 A8 00 00 00 00 00 00 01 20 01 20 ............. . 0040 01 30 00 0C 01 40 01 FF 01 80 01 FF 01 FF 01 FF .0...@.......... 0050 00 90 00 70 00 30 00 50 00 A0 00 00 00 70 00 00 ...p.0.P.....p.. 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................ 0090 01 FF 01 FF 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .p.............. 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #5 ]------ 0000 03 2B 02 DE 02 A7 02 8D 02 84 01 52 01 F7 FF FF .+.........R.... 0010 01 47 03 FD 02 4A 02 96 FF FF FF FF FF FF 02 8B .G...J.......... 0020 02 8A 02 88 02 87 02 87 00 98 00 A8 00 98 00 60 ...............` 0030 00 C0 00 00 00 A8 00 00 00 00 00 00 01 20 01 20 ............. . 0040 01 30 00 0C 01 40 01 FF 01 80 01 FF 01 FF 01 FF .0...@.......... 0050 00 90 00 70 00 30 00 50 00 A0 00 00 00 70 00 00 ...p.0.P.....p.. 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................ 0090 01 FF 01 FF 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .p.............. 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #6 ]------ 0000 03 5F 02 CC 02 A0 02 8C 02 86 01 52 01 F8 FF FF ._.........R.... 0010 01 47 03 FD 02 B8 02 96 FF FF FF FF FF FF 02 8F .G.............. 0020 02 8B 02 88 02 88 02 86 00 98 00 A8 00 98 00 60 ...............` 0030 00 C0 00 00 00 A8 00 00 00 00 00 00 01 20 01 20 ............. . 0040 01 30 00 0C 01 40 01 FF 01 80 01 FF 01 FF 01 FF .0...@.......... 0050 00 90 00 70 00 30 00 50 00 A0 00 00 00 70 00 00 ...p.0.P.....p.. 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................ 0090 01 FF 01 FF 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .p.............. 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 ................ ------[ Embedded Controller at 0066/0062 via Port I/O / Bank #7 ]------ 0000 03 61 02 DF 02 A8 02 8C 02 86 01 52 01 F7 FF FF .a.........R.... 0010 01 47 03 FD 02 86 02 86 FF FF FF FF FF FF 02 8B .G.............. 0020 02 8B 02 89 02 87 02 86 00 98 00 A8 00 98 00 60 ...............` 0030 00 C0 00 00 00 A8 00 00 00 00 00 00 01 20 01 20 ............. . 0040 01 30 00 0C 01 40 01 FF 01 80 01 FF 01 FF 01 FF .0...@.......... 0050 00 90 00 70 00 30 00 50 00 A0 00 00 00 70 00 00 ...p.0.P.....p.. 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0070 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0080 00 00 00 00 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................ 0090 01 FF 01 FF 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00B0 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .p.............. 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 ................ Time #1 = 5922 msec Time #3 = 0.281 / 0.276 / 0.285 / 0.252 / 407.217 / 0.256 / 0.248 / 0.278 / 0.249 / 408.921 / 0.255 / 0.268 / 0.293 / 0.263 / 413.320 / 0.267 msec

Thanks for your attention, Fiery. Here's the Sensor ProfilingDump. Looks like GPU and LM78 are the main culprits? ------[ Versions ]------ Program Version : AIDA64 Extreme v5.99.4900 BenchDLL Version: 4.3.793-x64 Windows Version : Microsoft Windows 10 Pro 10.0.17763.253 (64-bit) ------[ Motherboard Info ]------ Motherboard ID : <DMI> Motherboard Model : Asus Prime Z390-A Motherboard Chipset : Intel Cannon Point Z390, Intel Coffee Lake-S DMI MB Manufacturer : ASUSTeK COMPUTER INC. DMI MB Product : PRIME Z390-A DMI MB Version : Rev 1.xx DMI MB Serial : 181037805502187 DMI SYS Manufacturer: System manufacturer DMI SYS Product : System Product Name DMI SYS Version : System Version DMI SYS Serial : System Serial Number DMI BIOS Version : 0702 ------[ Video Adapters ]------ MSI GTX 980 Ti (MS-V323) [10DE-17C8 / 1462-3232] MSI GTX 980 Ti (MS-V323) [10DE-17C8 / 1462-3232] ------[ Video Driver ]------ nvapi.dll: 25.21.14.1735 - nVIDIA ForceWare 417.35 C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll|||C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumd.dll ------[ Sensor Profiling (Init) ]------ SensorInfo : 81.204 ms GPUSensorInfo : 15.719 ms GPU01 / NV Diode : 0.004 ms GPU01 / NV Fan PWM: 0.655 ms GPU02 / NV Diode : 0.004 ms GPU02 / NV Fan PWM: 0.563 ms HDD : 0.135 ms SPD : 0.732 ms AMB : 0.001 ms Asus EPU2 : 0.000 ms Asus EPU1 : 0.000 ms nVIDIA SPP : 0.000 ms nVIDIA MCP : 0.000 ms Intel GMCH : 0.000 ms Intel PCH : 0.000 ms Intel SNB : 0.026 ms Zambezi : 0.000 ms Kaveri : 0.000 ms Zen : 0.000 ms AMD SVI2 : 0.000 ms MTC0303 : 0.000 ms Smart Battery : 0.000 ms HID UPS : 0.000 ms TVALZ : 0.000 ms T-Balancer : 0.000 ms Asetek LC : 0.000 ms Kraken X42 : 0.000 ms Riing+ : 0.000 ms LM78 : 7.808 ms TT DPS : 0.000 ms Digifanless : 0.000 ms Corsair RMi : 0.000 ms Corsair AXi : 0.000 ms Odin : 0.000 ms Aquaero : 0.000 ms ------[ Sensor Profiling (Last) ]------ SensorInfo : 81.756 ms GPUSensorInfo : 16.498 ms GPU01 / NV Diode : 0.004 ms GPU01 / NV Fan PWM: 0.693 ms GPU02 / NV Diode : 0.004 ms GPU02 / NV Fan PWM: 0.812 ms HDD : 0.129 ms SPD : 0.716 ms AMB : 0.001 ms Asus EPU2 : 0.000 ms Asus EPU1 : 0.000 ms nVIDIA SPP : 0.000 ms nVIDIA MCP : 0.000 ms Intel GMCH : 0.000 ms Intel PCH : 0.000 ms Intel SNB : 0.025 ms Zambezi : 0.000 ms Kaveri : 0.000 ms Zen : 0.001 ms AMD SVI2 : 0.000 ms MTC0303 : 0.000 ms Smart Battery : 0.000 ms HID UPS : 0.000 ms TVALZ : 0.000 ms T-Balancer : 0.000 ms Asetek LC : 0.000 ms Kraken X42 : 0.000 ms Riing+ : 0.000 ms LM78 : 7.987 ms TT DPS : 0.000 ms Digifanless : 0.000 ms Corsair RMi : 0.000 ms Corsair AXi : 0.000 ms Odin : 0.000 ms Aquaero : 0.000 ms

Open a sensor panel with a good number of items in it (eg. 5 or more) click on an item near the top click "move down" at least a few times, to move the item down the list now shift-click on an above item Shift-click of course selects consecutive items. But you'll see that Aida selects consecutive items from the original position of your selected item (starting near the top, downwards) instead of its actual position (its new position, upwards).

Hi, I've used Aida64 for the Sensor Panel for many years. But after upgrading my PC*, I've noticed that Aida64 uses a relatively high amount of CPU (often hovering around 5%, sometimes hitting 10+%. Perhaps it always used so much but I've only noticed now. Anyway, the CPU usage seems unrelated to what's actually on the sensor panel: it behaves the same whether it has 0 items on it or 100. Though it does improve if I set transparency to 0%. And it does dip below 1% if the sensor panel is turned off completely by unchecking "show sensor panel" (as opposed to just hidden by setting all items to "hide"). It also seems to be pretty much unaffected by whether the polling rate is 100ms or 2000ms. So I have 2 questions: 1. Are there certain settings I can change in Aida64 that would reduce CPU usage? I only use the sensor panel and logitech g510s lcd panel (I don't even use the main aida64 window). So I'd be happy to disable anything that doesn't relate to those. Could I disable something in the stability section perhaps? 2. Is the 5-10% cpu usage actually a problem if I don't max out my CPU to 100%? I'm a photoshop power-user, which frequently works my CPU and RAM hard, but it usually only maxes out one or two cores (my CPU has 8 physical cores). My understanding is that, in theory at least, if Photoshop maxes out, say, cores 1 and 2, then the CPU will just shift Aida64's workload to core 3, and Photoshop's performance would remain unharmed. Is this how it works in reality? Thanks * Asus Prime z390-a; core i7-9700k; 64gb ram; two gtx980ti in SLI; two m.2 drives; six sata drives

The Monitor Refresh Rate sensor doesn't seem to work properly, at least in my case. My monitor (ASUS ROGswift PG287Q) has a physical button that switches between 60Hz/120Hz/144Hz. The button works without a hitch. I can see the refresh rate changing with my naked eye (noticeable change in smoothness) and by looking at a game's framerate while vsync is on (the FPS will max out at 60fps/120fps/144fps depending on refresh rate). The monitor itself also pops up a HUD that confirms the changed Hz value. But the Aida64 sensor doesn't pick up this change. It seems the problem may be at least partly to do with Windows' Display Adapter Properties (DAP), as Aida64 appears to only read the setting that is in DAP (shown below). If I change the Hz here, then Aida does update correctly (it also updates correctly if I change the Hz via the nvidia control panel). However, if I subsequently press the button on my monitor to change refresh rate, then the monitor does switch to the new refresh rate, but neither DAP or Aida are updated to reflect this new refresh rate. Is there any way to make Aida's Vertical Refresh Rate setting more accurate, to reflect the actual refresh rate (and not just what Windows thinks it is)? Thanks

oh, ok. I assumed you could do it since you do it with the gadget. Btw, why are the gadget and sensor panel separate things? Is the gadget architecture too limited to do what the sensor panel can do? Anyway, Aero Peek would be nice, since it's exactly the sort of thing that Aero Peek was designed for, but I can live without it. I'm happy enough to be able to see it with "show desktop"

ah, dammit, I just found a bug. The new no-minimise functionality doesn't work on "Aero Peek" (hovering over the "show desktop" corner button without clicking it) in Windows 7. This is actually the most important situation for the sensor panel to remain visible in my opinion, because it would let you quickly see your stats and then get immediately back to work Looks like I spent my $40 too soon :/

Thanks. I've just bought an upgrade, and the no-minimise functionality works as intended. I wish this program wasn't so expensive, but it's the best on the market, so it's hard to say no...

Cool, thanks. I'll check this periodically