Hi, I have a dell mobile M4700 laptop with the following spec: Intel Core i7-3840QM CPU @ 2.80GHz Family 6 Intel Core i7 @ 2.80GHz Ivy Bridge 22nm Technology Intel HD Graphics 4000 (Dell) 2048MB NVIDIA Quadro K2000M (Dell) Motherboard Manufacturer Dell Inc. Model 035JKV (SOCKET 0) Version 01 Chipset Vendor Intel Chipset Model Ivy Bridge Chipset Revision 09 Southbridge Vendor Intel Southbridge Model QM77 Southbridge Revision 04​
Im trying to get the optical bay SATA 2 to function to work with my 2nd SSD. i have a Crosiar SSD X neutron 240GB i got a Caddy from this site http://www.newmodeus.com/shop/index.php?...index&cPath=2_3 I put the SSD in the Caddy and slide it in.
I set it to raid and tried to get the optical drive to work on two raid options.
1. using the embedded controller
2. set the bios to raid and use RST and i think i have tried every version of RST drivers that are compatible with my system.
i use the classic drivers (original and modded) 11.2.0.1006 which best match to my Rom version , it didnt work no no matter what i tried. windows 7 8.1 and 10 and also it didnt work with all RST drivers that compatible with my system
the Bios recognizes the SSD as a "System Bay Device" with its serial number firmware ver and size. OS works with the caddy SSD as it was a second HDD primary drive.
the problem is when i run a benchmark on the caddy SSD i get 100mb\read\write instead of 550\550.
I set the system to raid and tried to get the optical drive to work on two raid options. 1. using the embedded controller 2. set the bios to raid and use RST drivers and i think i have tried every version of RST that are compatible with my system.with no luck.
the only thing that driving me crazy is when i set the bios to raid and use RST 11.2.0.1006 to build the raid-0(software based raid). the RST or the windows, kick out the SSD bay drive out of the raid array and in disk management the SSD bay drive transformed to an Un-partition drive. so i go and make a simple NTFS partition then benchmark the drive and i finally get 550\500 benchmark results but the drive is no longer part of the raid. . this is the only circumstance that benchmark the optical drive SSD provides 550\550
this is unbelievable. why the bay drive gets kicked out from the array a do first reboot?
what is happening in the raid building process that makes the SSD to work as it should(as a single drive after it get kicked from the array)??? benchmark the drive in any other way would give me a 100\100 results
there is one fact here. the optical SSD drive does work as it should but only after the RST finish to build the raid then i restart the system, the disk kicks out, i create a simple NTFS partition drive run banchmark and finally get 550\550 .
I tried GPT partition raid-MBR---legacy bios mode and EUFI--different ver of NTFS
with no success .
any help would be much appreciated
Thanks
