Jump to content

Memories4Life

Members
  • Content Count

    32
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Memories4Life

  • Rank
    Advanced Member
  1. i Still got the same problem with my drives not apparing even though i told you this had nothing to do with the Aquasuite because i had removed the Aquasuite and disconnected from the usb port. Still get heavy lagging. basically the software isnt usable for me. I have switched to using Aquasuite and dont have any of these problems, allbeit im missing a number of monitoring sensors but its a small price to pay. Thanks for the suppport but ill be quiting the use of Aida64 from here on as i dont see the need to pay for a service (subscription) that doesnt work for me. Wish you g
  2. See i was thinking that at the start but then i removed the Auqasuite and disconnected the controller from the internal USB port and ran for 24hrs with the same problem. The Screenshot above is the X99-E without the Aquasuite installed.
  3. Hi Fiery, This lag isnt working for me its become very annoying to be honest. I never had this problem in the past using the same system config x2. The X99-E is alot worst than the X99-M, the first system is more important to me when it comes to monitoring. At present im getting better reults using the Aquaero 6XT plus the sensors match my motherboard readings where Aida is always a few degrees out. When Aida launches im always missing drives (See screenshot) and i have to quit Aida and restart to show my drives (X99-E Board). I find myself consistantly trying to find out why Aida is d
  4. Hi Fiery, This comes with a problem. If you set to 500ms and have a clock displaying the seconds go alittle crazy. Is there any chance of removing the clock from responding to this change? ie... it takes 30secs (there abouts) to cycle a full minute once set to 500ms ALso Corsair have released CL V4.5.x.x and this have improved the compatibility with aida64.
  5. Hi Fiery, You suggestion has improved but there is still a 2sec delay on the X99-E and on the X99-M there is a sec delay but its random... ie sensors tick ever second as they should but every 5-8 seconds they will be a delay of 2 secs.... hope you understand what i mean here. P.S Sorry for delay. Demanding clients.
  6. Hi Fiery, I forgot to mention im away on business for two days. I will be back tomorrow (Wednesday) and will try your solution. Sorry for delay. Talk tomorrow.
  7. System 2. On this system i dont have C-link installed. ------[ AIDA64 Extreme v5.80.4068 Beta ]------ ------[ Microsoft Windows 10 Pro 10.0.14393.693 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : <DMI> Motherboard Model : Asus X99-M WS Motherboard Chipset : Intel Wellsburg X99, Intel Haswell-E DMI MB Manufacturer : ASUSTeK COMPUTER INC. DMI MB Product : X99-M WS DMI MB Version : Rev 1.xx DMI MB Serial : DMI SYS Manufacturer: ASUS DMI SYS Product : All Series DMI SYS Version : S
  8. System 1. I am aware that having Corsair Link running can cause Adia problems. I never have CLink running just use it to send command line instructions to switch profiles which i use a custom .bat file to achive so i dont need Clink running just installed. I have also removed Clink and still have the sam problem. ------[ AIDA64 Extreme v5.80.4068 Beta ]------ ------[ Microsoft Windows 10 Pro 10.0.14393.693 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : <DMI> Motherboard Model : Asus X99-E WS Motherboard Chipset : Intel Wells
  9. Hi Fiery, Thank you for responding. First i must appologise for the post which you deleted. Having a valid AIDA64 license i didnt know that those with invalid valid AIDA64 license would see adds. I have never seen the adds and i thought that was down to me using my HOST file to prevent the web from dumb rubbish/junk onto my systems. So please forgive me for that error in judgement. Should i be posting up this dump file for both my systems?
  10. Aidia64 is getting really bad for me. Harddrives going missing from OSD (have to restart adia), sensor update freq take between 2-6sec even though i have sensors set to 1,000ms (1sec). Change settings in preferences and program hangs for several secs the list goes on. For the past year or so i havnt seen a version of adia64 that works with both my systems. I stopped using Adia but keep looking out for updates hoping things will get better (beta most of the time) but the problems get worse. Honestly guys this is my final attempt with adia if these problem persist then i have to quit using t
  11. Hi Fiery, Wont get chance to test this until 2morrow morning as im away for the day on business. Ill let you no Saturday morning UK time. Thanks
  12. Hi Fiery, I don't use corsair link really, Like everything else Corsair does software wise is very unstable. I only installed the C'Link just to change the colors of the Blockhead and adjust the pump rpm and that's it. In Aida's case i did quit the Corsair-link software and stop all services but Aida still doesn't pick up the Sensor. I have gone back to version 3.2.X and all works well.
  13. Hi Fiery, Sorry for not being clear enough. Aida64 does not show the H110i GTX pump rpm as it did under Corsair link v3.2.5742. Clearly they have changed something under v4.2 which stops Adia64 from pickup the sensor. Bugs me when Corsair play around with there software cause 9/10 times they end up breaking things. Nightmare but that's Corsair for you. Thanks for the recent fix for the X99-M works a treat.
  14. Thanks for that... Everything seems to work ok. Not sure if your aware but Corsair has updated the Corsair Link Software to version 4.2+. In return now there is no sensor support for the H110i GTX Pump. Thanks
  15. That worked! Should have thought about this clearer before posting. Thanks Fiery
×
×
  • Create New...