dann23

Hello, There are no readings for smart for drives that are part of the storage pool.

Hello, As the title says, there is a problem reading smart sensor for samsung 980 pro m2 2TB drive. Attached is what aida64 shows and an export from samsung magician. samsung magician.csv

Hello, Is it possible to monitor temperature on intel lan adapters? I'm talking about intel i350 or x550. Thank you.

Hello, I have some dumps for HP Compaq 8710W and HP Proliant ML150 G6. Maybe it can show more sensors. Thank you. 8710w-isasensordump.txt 8710w-smbusdump_full.txt proliantg6-isasensordump.txt proliantg6-smbusdump_full.txt

I attached an screenshot with the values from EasyTune6 and the current values from aida64. Hope this helps.

Hello. Fan speed is not displayed for all the fans in the system. I attached isa and smdbus dupms. Thank you. isasensordump.txt smbusdump_full.txt

Is it possible to show if a SSD is compatible with eDrive spectifications? I understand that the ssd needs to be compatible with TCG Opal 2.0 and IEEE-1667 and also the systems needs to have support for UEFI 2.3.1 and enabled. Also at least Windows 8 is need it and TPM enabled.

Hello. Does it help if I can provide you remote access to a HP laptop?

Hello. A 64bit binary would be usefull because it's not possible to use aida64 on a 64bit winpe. Because of this I have to build a second winpe image just to use aida64.

Any news about this?

added battery dump. battdump.txt

Is it possible to enable reading of total power consumption on this type of notebook? Normaly this is possible with hp power assistant but it would be nice if aida64 can do this. thank you. isasensordump.txt smbusdump_full.txt

any progress on this problem?

phenom II 965 supports nested paging for sure. I used it with virtualbox. also if virtualization wasn't enabled in bios then hyper-v won't run. hyper-v needs 64bit support and hardware virtualization to run. maybe aida64 can't read those registers because hyper-v is already running. I'll check this with winpe and I'll start aida64 from there.

Also Pacifica is reported as not supported. HyperV is running just fine so it must be aida64 fault. cpuidmsrdump.txt

Aida64 shows that phenom II 965 doesn't support nested paging, but in fact this processor supports nested paging and I used it with virtualbox.

also there is the same problem with sb750 raid controller. no drives enumeration and no smart readings.

Done raiddump.txt diskctrldump.txt

jmicron driver 1.17.62 and windows 2008 r2 right now. I didn't test on windows 7

hello. I tried but no luck. Does it work when I have raid enabled or is it for AHCI mode?

any news about this?

I believe you're right. A simple test to see this is by changing the voltage. If I change CPU voltage I get a differnt reading. But if I change the CPU NB voltage then nothing. Gigabyte DES utility sees this but hwmonitor doesn't. So maybe you're right. Also, after playing with voltages and frequencies, gigabyte des utility stopped working it reads 0 watts.

the latest jmicron driver seems to support reading smart sensor. can this be enabled in everest to? thank you. ftp://driver.jmicron.com.tw/SATA_Controller/Windows/ReleaseNote.txt

I have a ga-ma790fxt-ud5p motherboard. HWMonitor worked with this board despide what bios version I had. And after I read about gigabyte des it seems to me that there are some versions of intersil chips that are used. what I know is that the motherboards for amd are capable of reading power comsumption and the processors voltage. but the ones from inter board are capable or reading much more than this. So I believe that the best aproach is to support this features based on motherboards types. or maybe enable this for some motherboards that are known to have stable readings. And it's worth to mention that gigabyte des utility is not updated with every bios version that is released and they work. and they don't display odd readings. also there are 2 versions of gigabyte des utility: Dynamic Energy Saverâ„¢ 2 - Support Intel X58/P55/H55/H57 series MB. Dynamic Energy Saver Advanced - Support Intel X48/P45/P43/G45/G43/G41/EP35/EP31/EG31 series & GA-E7AUM-DS2H MB. http://www.gigabyte.com/support-downloads/Utility.aspx

maybe we can give it another try. HWMonitor has des support and works fine with my motherboard.