Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Undermoose

  • Rank
  1. I found the problem: Aquasuite's HW monitoring. I disabled the monitoring and Aida64 continues to load. I recently upgraded Aida64 and Aquasuite (at about the same time)... /bonk
  2. I found the problem: Aquasuite's HW monitoring. I disabled the monitoring and Aida64 continues to load. I recently upgraded Aida64 and Aquasuite (at about the same time)... /bonk
  3. I started a thread in general discussion, but then realized this is probably the correct forum: I tried the latest May 24th beta, and reverted to 6.20 and nothing helps. Aida64 won't launch.
  4. I tried the latest beta, Version: 6.25.5423 beta (May 24, 2020), but it still hangs on scanning PCIe.
  5. Aida64 crashes on startup scanning PCIe devices Gigabyte Aorus Xtreme TRX40. Threadripper 3960x. It was working yesterday. My license expired 5/14 so I renewed, and after updating bombs on start up. I can kill it in task manager, but same thing happens re-starting or rebooting and re-starting.
  6. LOL, I stand corrected! Just for curiosity sake I powered off and reset CMOS "again".... CPU sensor UNSTUCK! I shall now endeavor to bang my head on the desk repeatedly while reciting a DOS manual from 1990.
  7. EVGA thought this was a motherboard sensor, I've seen stuck cores before on CPU's, this isn't what's happening. Good thought though!
  8. They suggested I RMA the board as they thought there was a stuck temperature sensor, but I think it's their BIOS... I just got the board this past Saturday so will return it to my local store for a replacement. If the same thing happens I'll have some ammunition to ask for a BIOS fix from EVGA. I was hoping the situation would be reversed, you offer some info I could go back to EVGA with , but it looks like the path of least resistance is a board swap since I'm in my 30 day return period. Thanks Fiery!
  9. Hi Fiery, In the BIOS I see proper CPU temp, 40c+ fluctuating. In EVGA E-LEET I see the same 111c temp, stuck, non-fluctuating. Do you recommend I RMA the mobo? Thank you.
  10. Hi, New motherboard, new technical issues FUN! I sent an email, but then remembered we get good support via this forum. CPU temp stuck at 111c! lol, but the CPU package and cores look good. Issue is the CPU fan seems to run based on the CPU temp, it's stuck at 100 percent. Here's the right click, Sensor Debug, ISA Sensor Dump. Thank you for helping! ------[ AIDA64 v2.85.2447 Beta ]------ ------[ Microsoft Windows 8 Professional with Media Center 6.2.9200.16581 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : 63-0100-000001-00101111-122211-Chipset$
  11. Rebooted without loading ASRock Extreme automatically and CPU fan is fine in AIDA64. Pretty obvious issue, two monitoring programs not cooperating, but relatively new motherboard for me so didn't figure it out until you mentioned the issue Fiery. Thanks! Working fine now.
  12. Interesting, I forgot I had this loaded, so I turned off ASRock's Extreme Tuner and AIDA64 doesn't see a CPU Fan anymore.
  13. ------[ AIDA64 v2.00.1714 Beta ]------ ------[ Microsoft Windows 7 Ultimate 6.1.7601 Service Pack 1 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : 63-0100-000001-00101111-082311-Chipset$AS545121_BIOS DATE: 09/21/11 21:37:25 VER: 04.06.04 Motherboard Model : ASRock Z68 Extreme7 Gen3 Motherboard Chipset : Intel Cougar Point Z68, Intel Sandy Bridge DMI MB Manufacturer : ASRock DMI MB Product : Z68 Extreme7 Gen3 DMI MB Version : DMI MB Serial : DMI SYS Manufacturer: To Be Filled By O.E.M. DMI SYS Product : To Be Filled By O.E.M. DMI SYS
  14. Hi, I have the ASRock Extreme7 Gen3 motherboard. I can see the CPU fan in the bios and it's always on consistently, but in Aida64 it constantly alternates between 0 and the fan's current RPM. 0 for 5-30 seconds and then shows the RPM for 5-30 seconds and then back to 0, etc...
  • Create New...