Chris77

I have a new system with an ASUS Maximus XI Apex Board and in AIDA64 sensor page the sensor data from the onboard waterflow sensor and the Water In/Out sensors are not showing up. With my other Rampage VI Apex the data is already present. Info: The sensor "Wasser"(water) is from the AC D5 Next pump not from the motherboard.

Hello! Many thanks, it works perfect! :-)

Full Speed (3000 RPM): ------[ Versions ]------ Program Version : AIDA64 Extreme v5.99.4930 Beta BenchDLL Version: 4.3.793-x64 Windows Version : Microsoft Windows 10 Education 10.0.17763.253 (64-bit) ------[ Video Adapters ]------ EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] ------[ Video Driver ]------ nvapi.dll: 25.21.14.1735 - nVIDIA ForceWare 417.35 C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Windows\Sys

SMBUs Dump with 0 RPM fans: ------[ Versions ]------ Program Version : AIDA64 Extreme v5.99.4930 Beta BenchDLL Version: 4.3.793-x64 Windows Version : Microsoft Windows 10 Education 10.0.17763.195 (64-bit) ------[ Video Adapters ]------ EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] ------[ Video Driver ]------ nvapi.dll: 25.21.14.1735 - nVIDIA ForceWare 417.35 C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\Window

Hello! nVidia GPU Registers: ------[ Versions ]------ Program Version : AIDA64 Extreme v5.99.4917 Beta BenchDLL Version: 4.3.793-x64 Windows Version : Microsoft Windows 10 Education 10.0.17763.195 (64-bit) ------[ Video Adapters ]------ EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] EVGA GeForce RTX 2080 Ti XC2 Ultra [10DE-1E07 / 3842-2387 / Rev A1] ------[ Video Driver ]------ nvapi.dll: 25.21.14.1735 - nVIDIA ForceWare 417.35 C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_e7b3660b4830c245\nvldumdx.dll|||C:\

Hello! Is it possible to monitor the additional ICX2 sensors on EVGA 2080(Ti) XC2/FTW3 cards with AIDA64? On 1080Ti the ICX sensors showed up in AIDA64.

Hello! Many thanks, it works flawlessly! :-)

Hello! With the Asrock Taichi X299 XE, all fans are showing up in AIDA64 except only the CPU optional fan Speed! I'm already using the latest Beta of AIDA64! In Asrock A-Tuning utility all fans are showing up! It would be great, if you can make the CPU optional fan showing up also in AIDA64! ;-) Many thanks!

Since the upgrade to Windows 8.1, the problem is back. AIDA64 now shows the wrong resolution again (dpi scaling 175%, resolution in AIDA64: 2194 x 1234). Best regards, Chris77

Hello, many thanks for the workaround, but there is already something wrong, because now AIDA64 shows a resolution of 3835 x 2158 instead of the native 3840 x 2160 pixels. Many thanks and best regards Chris77

It seems, that the problem has something to do with the dpi scaling in Windows, when the scaling is at 200%, a resolution of 1920 x 1080 is monitored, when the scaling is at 180%, a resolution of 2131 x 1199 is monitored and so on.

Monitor: Monitor Properties Monitor Name PnP-Monitor (Standard) [NoDB] Monitor ID ACI32A2 Model PQ321 Manufacture Date 1990 Serial Number None Max. Visible Display Size 70 cm x 39 cm (31.5") Picture Aspect Ratio 16:9 Horizontal Frequency 24 - 140 kHz Vertical Frequency 20 - 77 Hz Maximum Pixel Clock 300 MHz Gamma 2.20 DPMS Mode Support Active-Off Desktop: Desktop Properties Device Technology Raster Display Resolution 1920 x 1080 Color Depth 32-bit Color Planes 1 Font Resolution 96 dpi Pixel Width / Height 18 / 18 Pixel Diagonal 26 Vertical Refresh Rate 60 Hz Desktop Wallpaper Des

Hello, the desktop resolution is 3840 x 2160, already. Best regards, Christian

Hello, I have now an ASUS PQ321Q display with a native Resolution of 3840 x 2160 pixel, but AIDA64 displays a desktop resolution of 1920 x 1080 pixel. What is the failure?

Many thanks, the new Beta works perfectly!