D. J.

I have been using aida64 to display/mornitor my Koolance TMS-200 control settings for some time. Recently I discover that it sometimes loses the share memory function after the computer comes out from "SLEEP". This happens to all versions since the share memory function spported for the TMS-200. When it happens the registry values relating to the TMS-200 are no longer written. Restart the AIDA64 usually fix the problem. System: Windows 7 64bit; TMS-200 SW: 2.1.28 final; AIDA64 SW: 1.30 and all beta versions.

The Flow rate monitoring is not implemented in 1.60 1300. Which future version will support such measurements?

I have quickly tested your new version that supports share memory for Koolance TMS-200 controller; 1. It does display tempreature sensor1 to 5, OK! 2. It only displays the speed of fan1 and fan2, no fan3! 3. It does not display the pump speed and flow rate at all!

Koolance has released a new version of their TMS-200 controller. TMS-200 v.2.1.28 *Final* Updates: •Error log file now generated for debugging purposes, named "Req.log" and found in the TMS software install folder. •Added an option to fix the COM port used for TMS-200 so it doesn't need to rescan each time. The option is located at the top of the settings screen. •Added "Share Memory" feature at the bottom of the settings screen. This can be enabled to share TMS output data (pump speed, temperatures, etc.) for compatible 3rd-party programs. Can AIDA64 developer confirm the AIDA64 is one of the compatible 3rd-party programs?

Re: AIDA64 and TMS-200 Controller by [Koolance] Tim » Mon Dec 06, 2010 10:39 am "Currently, the AIDA64 software maker says it won't work simultaneously while the TMS-200 software is open. Our lead programmer is working with them on that".

Re: AIDA64 and TMS-200 Controller by [Koolance] Tim » Mon Dec 06, 2010 10:39 am "Currently, the AIDA64 software maker says it won't work simultaneously while the TMS-200 software is open. Our lead programmer is working with them on that".

Here is the answer from Koolance Support Center: Re: AIDA64 and TMS-200 Controller by [Koolance] Tim » Mon Dec 06, 2010 10:39 am "Currently, the AIDA64 software maker says it won't work simultaneously while the TMS-200 software is open. Our lead programmer is working with them on that".

I tried both of your 1.2 1150 and 1170 beta and both locked up my computer when the sensors were enabled. I even formatted my HD and had a clearn instal with no luck. My computer simply would not boot at all, but I could start the computer in safe mode. I had to delete your program registry vaules to be able to restart the machine. MB - Asus P3E3 premium wifi@n CPU - Intel GPU - 1xATI5970 and 1X8800GTX HD - 2x128GB SSD

I was trying to setup my friend's water cooling computer. He purchased Koolance TMS-200 tempreature controller and use AIDA64 Extreme to monitor the HW. I checked the option within the AIDA64 to support the TMS-200 controller. However I could not see any information as far as the TMS-200 controller is concerned. They both work fine on its own, the AIDA64 just does not report any sensors' readings from the TMS-200 unit. Could someone show me the light on this? Software used: AIDA64 V1.2 1150 Koolance TMS-200 V2.1.28 USB Driver (Prolific V1.30)