Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by ghot

  1. BIOS and Device Manager see the WD 8TB Black HDD, but AIDA64 Extreme, doesn't see the temperature of the drive. AIDA64 can see the WD 4TB Black's temp, fine. It also saw the previous WD 2TB Black's temp. I'm probably just missing something obvious. :/ Disregard...it fixed itself after about 5 reboots. LOL
  2. The only three temps I have that I don't normally show on my OSD are... VRM, PCH Diode, and Temperature #2. This is looking at the OSD config list. I see the exact same temps on the Stability Test > Preferences > Temperatures tab as well...
  3. Only other question I have is about some other temps. Namely... Temperature #2, and PCH Diode. They seem steady at the temps shown below. (Idle) All the other temps vary somewhat, but Temp #2 and PCH Diode, stay at 41C and 53C. What do these temps refer to?
  4. Ah, I get it. I have to enable the graphing of the power supply voltages, ON the Voltage tab... THEN they show up on the Statistics tab. The ONLY voltages that show up on the Statistics tab, are the ones that have been "turned on" on the Voltages tab. After enabling everything on the Voltage tab, it then showed up on the Statistics tab... Not sure what browser you're using, but left click once, then left click again... on the picture below, to see it full size.
  5. I've not only gained the 3.3v, but the 3.3v Standby as well. Kudos to an excellent job, my friend. So now I seem to have everything I should. I've gained... CPU Package, CPU_Opt, GPU2, 3.3V, 3.3v standby, 5v and 12v. Still don't see the power supply voltages on the Statistics tab of the Stability Test, and can find no way to add them. I can add them to both the Voltages tab and the Unified tab, though. Thanks so much for your tireless work on keeping this excellent program up to date. Just saw a news item the other day. Nvidia is planni
  6. Ok AIDA64 625.5400 (no beta). Motherboard temp agrees. For the "CPU" temp, AIDA64 shows the average, and it doesn't change. Stays fixed at 26-27C In HWInfo I SEE the 12v, 5v, and possibly the 3v? (3VSB could be something else... not sure) Now I'm gonna re-install the 5462 Beta, and compare again... brb. Ok, now the 5462 Beta is installed. Notice the CPU and CPU Package temps. AIDA64 is NOW showing how the CPU temp fluctuates as well as the CPU package temp. And here is a pic of the Stabi
  7. Yeah... 3.3v, 5v, and 12v. on the Monitor tab in the BIOS. ...and thank YOU for your excellent continuing work. You ARE amazing. ^^ /edit I been up for far too long. Don't kill yourself or anything on this issue. I will check back in 6-8 hours, after some much needed rest. You do good work. ^^
  8. Yes, it's in the BIOS. Like I said this is a weird motherboard. First time I bought a board NOT meant for overclocking or serious gaming, etc. I will go into the BIOS and double check, but I'm pretty sure I did that when I didn't see the voltages in AIDA64... brb
  9. Ok... we mostly succeeded. I have the 12v, the 5v and the ... 1.8V?, I also got the CPU Opt cooling fan as well. Now still no PSU voltages on the Statistics tab, BUT I can choose: those three voltages to show on the graph, on the Voltages tab. 12v, 5v, and 1.8v? Being as how my computer does function well, I will assume that the 1.8v is NOT my PSU's 3v. New ISA Sensor Dump, in case you need it. isasensordump.txt Current OSD (at least the things that might be important at the moment)
  10. ------[ Versions ]------ Program Version : AIDA64 Extreme v6.25.5458 Beta BenchDLL Version: 4.5.825.8-x64 Windows Version : Microsoft Windows 10 Home 10.0.19041.423 (64-bit) GetProductInfo : 0x00000065 ------[ Motherboard Info ]------ Motherboard ID : 63-0100-000001-00101111-122418-Chipset$0AAAA000_BIOS DATE: 06/19/20 16:55:22 VER: 05.00011 Motherboard Model : Asus Pro WS X570-ACE Motherboard Chipset : AMD Bixby X570, AMD K17.7 FCH, AMD K17.7 IMC DMI MB Manufacturer : ASUSTeK COMPUTER INC. DMI MB Product : Pro WS X570-ACE DMI MB Version : Rev
  11. Ok, moved the AIDA64 Extreme folder to C:\ ...ran a new shortcut from aida64.exe Rebooted comp just to be sure? Still no power supply voltages. Also, might as well mention, that there is no entry in the OSD config for the CPU Optional cooling fan. The CPU cooling fan is there. This is a NOT normal motherboard. Asus calls it a workstation board. This is a VERY old (but high quality) power supply. Probably 10-13 years old. I'm also not sure if it makes a difference, But I installed Windows 10 Home without a System or a Recovery partition.The System
  12. Ok, I'm probably doing something wrong. VERY new to Windows 10. Tried extracting to C:\Program Files (x86)\FinalWire\AIDA64 Extreme folder. Tried to extract to the FinalWire folder... same message. Extracted to a "New" folder on Desktop, then copy/pasted/replaced into the C:\Program Files (x86)\FinalWire\AIDA64 Extreme folder. Rebooted comp, but no change. Still no power supply voltages. Same as pic in post #1.
  13. That link is to a portable zip version of the Beta? How do I use that to... "Upgrade"?
  14. I have no power supply voltages on either the Statistics tab or the OSD configure page. I'm not saying the voltages are zero, I'm saying they don't even exist. AIDA64 Extreme 6.25.5400 My CURRENT system... Windows 10 Home (2004) x64 [10.0.19041.423] AMD Ryzen 7 3700X (00-100000071BOX) ASUS Pro WS X570-ACE (2103 BIOS) EVGA 08G-P4-2171-KR Geforce RTX 2070 8GB 256-bit GDDR6 G.Skill Trident Z 16 GB (2 x 8 GB) DDR4-3200 (F4-3200C14D-16GTZKW) COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 CPU Cooler (push/pull) Samsung 860 EVO 500GB (MZ-76E500) WD 2TB Caviar
  15. Bitdefender Internet Security 2013 OSD items: Side Note: Up until today I haven't been running any page file as I have 16GB of installed RAM. However, since the last Important Windows Update on the 8th of April, no page file in combination with Acronis True Image Home has caused some issues that never existed before. So, despite my misgivings, I've had to re-enable the page file. I only point this out for your ongoing research into the AIDA64 Extreme issues, as it may have some relevance. I don't know if it was the last Windows Update or not, as MS is less than fort
  16. Until the more recent versions of AIDA64, I would get thread creation errors about once a day. Now, with the latest versions I just notice the OSD disappears, about once a day. While this is better than the "frozen" OSD I used to get, it's still kind of a pita. My system: Windows 7 Home Premium x64 SP1 AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor ASUS SABERTOOTH 990FX R2.0 AM3+ SATA 6Gb/s USB 3.0 ATX Motherboard ( 1302 BIOS) EVGA 06G-P4-2791-KR GeForce GTX TITAN 6GB 384 bit GDDR5 CORSAIR Dominator Platinum 16GB (2 x 8GB) DDR3 1866Mhz RAM (f
  17. UPDATE: Ok switched to Nvidia system tools...set fan speed (works) set it to run at boot (works). Now we wait to see if I get a black screen or screen just goes into unrecoverable stanby, all by itself. It may take an hour or 3 days...it's was totally intermittant, running AIDA64 Ext, and any version of EVGA Precisson, which has been totally uninstalled.
  18. Ok, I intend to try Nvidia Sytem Tools, as soon as I find out HOW to use it. The artifacting has gone since I reverted back, again to the 296.10 drivers and the 2.1 version of EVGA Presicision, however, last niight after 2-3 days of no issues...I simply alt+tabbed out of D2 and got a black screen...reboot cleared that. I don't have any other games installed, nor do I own any, "newer" games. The PSU voltages NEVER vary, and are well within 1% of the proper values. This is NOT one of the newer PC Power & Cooling PSU's (before the were sold to OCZ). in fact I have two of these 750w PSU's
  19. AIDA64 Extreme v 2.70.2200 Geforce 296.10 WHQL Driver EVGA Precision v Game: Diablo II SYSTEM: Windows 7 Home Premium x64 SP1 AMD FX-4170 Zambezi 4.2GHz (4.3GHz Turbo) Socket AM3+ 125W Quad-Core Processor (stock) ASUS SABERTOOTH 990FX R2.0 AM3+ SATA 6Gb/s USB 3.0 ATX Motherboard ( 1302 BIOS) EVGA 015-P3-1580-AR GeForce GTX 580 (Fermi) 1536MB 384-bit CORSAIR Dominator Platinum 16GB (2 x 8GB) DDR3 1866Mhz RAM (factory settings) SATA WD 300GB Velociraptor - SATA II WD 1TB Caviar Black FALS - SATA II WD 1TB Caviar Black FAEX - SATA III LG GH22LS30 CD/DVD Burner PC Power &
  20. Thx for the fast response...keep up the great work
  21. New comp (custom build, clean insttall of Windows 7 Home Prem x64. I did not get this error until installing AIDA64 Extreme .260.2100. It only happens on reboot or cold boot. I don't know if it's just a stability setting, I left them all at defaults...and motherboard has successfully been updated to latest bios. OS is installed on the 300GB SATA II Velociraptor, plugged into a SATA III port...no errors or warnings in Device Manager > Show Hidden Devices either. No ASUS software installed except drivers, no RAID, no overclocking...yet, no other problems with AIDA64. Any help or solutio
  • Create New...