fadsarmy
-
Posts
78 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by fadsarmy
-
-
It's been a couple of weeks. Shall I assume it's not going to get sorted?
-
On 10/6/2021 at 2:34 PM, Fiery said:
Thank you for the info. We've added CPU, Motherboard and South Bridge temperatures for your motherboard in the latest beta version of AIDA64 Extreme:
https://www.aida64.com/downloads/latesta64xebeta
After upgrading to this new version, make sure to restart Windows to finalize the upgrade.
Let me know how it works.
Thanks for that. Unfortunately Motherboard and South Bridge temperatures are still missing as is the CPU fan speed. There are two CPU fan headers on the board. Also, any chance of adding rest of voltages? Thanks.
-
2 hours ago, Fiery said:
What do you mean by "According to Asrock" ? Do you have a software made by ASRock that can measure VRM and PCH temperatures under Windows? Or you can see such readings in the UEFI Setup (a.k.a. BIOS Setup) ? I'm just asking because we've checked, and we cannot see any traces of such thermal sensors in your system -- but maybe we need to look elsewhere.
I remember reading somewhere an Asrock member mentioning he was aware of people complaining about the high vrm temps on this board read by HWiNFO. I chatted with the guy at hwinfo and he also confirmed this.
He also said T12 AND T13 are most likely motherboard and pch temps.
-
Hi
According to Asrock and HWiNFO, my unit has a VRM temp sensor and PCH. AIDA64 is not reporting either of these and also cpu fan speed is missing. Looking forward to getting this fixed please.
-
16 hours ago, Fiery said:
It could be the chipset temperature or a secondary motherboard temperature. It's hard to tell since there's no reference point to check it against. A reference could be the same reading shown in either the BIOS Setup (UEFI Setup) or in ASRock's own monitoring software. Without that, we can only guess. Unless of course you're very curious and would be willing to heat up and cool down the chipset and track the "CPU" temperature reading in AIDA64 meanwhile
Unfortunately there's no chipset on the motherboard. From what I've read, the A300 chipset is within the cpu. Thanks for your help anyway. Really appreciated.
-
On 11/25/2019 at 10:39 AM, Fiery said:
Thank you. In that case it'd be quite difficult to find out what the "CPU" temperature stands for on your particular motherboard (given that ASRock has no factory software that would show that reading in any way), so I'd recommend you to just skip that reading and focus on the "CPU Diode" and "Motherboard" temperatures.
Thanks for your help. What about aida64 cpu temp? Surely it's not reading anything cpu related. It's always between 38-43 C even during cpu torture test. Could it be chipset temp?
-
On 11/21/2019 at 1:05 PM, Fiery said:
Thank you for your feedback. In the UEFI Setup (BIOS Setup) can you see two distinct thermal readings, one for the motherboard, one for the CPU?
I can see cpu and motherboard temp in UEFI. The UEFI cpu temp matches AIDA64 cpu diode temp, and the UEFI motherboard temp is same as AIDA64 motherboard temp.
-
8 hours ago, Fiery said:
Please upgrade to the latest beta version of AIDA64 Extreme available at:
https://www.aida64.com/downloads/latesta64xebeta
After upgrading to this new version, make sure to restart Windows to finalize the upgrade.
Let me know how it works.
Thanks for that. The cpu diode temp ranges between 23-50 C during torture test so I'm pretty sure it's actually the cpu temp. The cpu temp is always between 38-43 C even during cpu torture test so I don't think it's reading the cpu temp, probably PCH.
-
-
Is there any chance mch temps can be read on this motherboard? Are there any other sensors? I have attached the ISA sensor and SMBUS dumps. Thanks in advance.
-
On 11/1/2019 at 12:11 PM, Fiery said:
Unless we would use tricks that require rooting, I don't think it's possible
Ok thanks. So there is a sensor then?
-
Is it possible to read the cpu temp of the Nvidia Shield? AIDA64 reports as "no thermal sensor."
-
1 hour ago, Fiery said:
Make sure to upgrade to the latest beta version of AIDA64 Extreme available at:
https://www.aida64.com/downloads/latesta64xebeta
After upgrading to this new version, make sure to restart Windows to finalize the upgrade.
Let me know if it helps.
Perfect. Thanks Fiery for prompt response.
-
Hi,
My M.2 Corsair MP510 temp is not being reported by aida64. Is there any chance of adding support for this? Thanks in advance.
-
14 hours ago, Fiery said:
It's because the drive provides 2 thermal readings. It depends on the SSD controller firmware whether those are 2 distinct temperatures. You can see all the thermal readings and other readings and measurements provided by your SSD on the Storage / SMART page in AIDA64.
Thanks for the prompt reply. The last version of AIDA64 only showed one reading even though the SMART shows two temp sensors. I wasn't aware there were two sensors especially for a budget ssd.
-
-
Hello,
AIDA64 is reporting two psu temps whereas Corsair iCUE reports only one? Is AIDA64 reporting correctly?
-
I just realised CPU Vcore and CPU VID are reporting the exact same voltage and change simultaneously. This is not the case on my other motherboards.
-
7 hours ago, Fiery said:
The above mentioned new AIDA64 beta build is available at:
Thank you Fiery, all good now. Excellent service as always.
-
Thanks Fiery. I just checked eSIO temp and you're right it's the cpu temp.
-
Hello,
I have two cpu fan headers but AIDA64 is only reading one of them. Any idea what eSIO temperature is being reported by cpuid hardware monitor? Thank you for your help.
-
On 1/22/2019 at 8:48 AM, Fiery said:
The above mentioned fix is now available for download at:
All good, many thanks.
-
6 hours ago, Fiery said:
You're right, our implementation of the VRM temperature turned out to be inadequate. We'll fix it up in the next AIDA64 beta update.
Thanks for the help.
-
2 hours ago, Fiery said:
Make sure to upgrade to the latest beta version of AIDA64 Extreme available at:
https://www.aida64.com/downloads/latesta64xebeta
Let me know how it works.
Unfortunately, the latest beta version still doesn't show the VRM/Mosfet temperature.
ASRock DeskMini H470 (ASRock H470M-STX)
in Hardware monitoring
Posted
All good, thanks. Sorry for doubting you.