namuk
-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by namuk
-
-
20 minutes ago, Fiery said:
Less issues and also usually you can obtain a cheaper _and_ larger screen that way.
not wrong there hard to find a small one unless like said 2nd had route, looked last night and a 21" cheap screen is like 65 quid with dam good spec, only asked as im still running the alphacool screens and the sd megatron from way back were i posted the alpha driver on a thread i started, its all gone mad on screens now on here lol, head was spinning on what screen.
-
On 3/9/2020 at 8:25 PM, Fiery said:
BeadaPanel perhaps:
https://forums.aida64.com/topic/5149-beadapanel-lcd-device-support/Also, when it comes to external LCD displays, we keep recommending just picking up a nice 2nd-hand LCD monitor, connect it to your PC via DSub, DVI or HDMI, extend your Windows Desktop onto it, and then you can use the SensorPanel on a large colour display and enjoy the heck out of it
why recommend ? better for less issues and more stable?
-
On 11/27/2018 at 8:57 AM, Fiery said:
So everything is working properly now?
it is mate, all rpm and temps ect are bang on as i still use the alphalcd and SDC meg linked to AIDA, very happy
-
fans now are showing correct rpm now in 5.99.4900 as now is showing the fans in cooling,so i am using them instead of the cpu opt and opt3.
also seen temp is there now a correct dedicated pump
nice one
-
On 9/26/2018 at 7:42 AM, Fiery said:
It must be something about your fans. Are they 3-wire or 4-wire fans?
4, the ones supplied
-
2 hours ago, Fiery said:
You only need to have Asetek LC sensor support enabled in order to have H115i Pro readings.
yea did that a while ago with my old h100 v2 , all fan speeds show fine across the board its just cooler fan speeds even pump fan speed shows ok, i have got an asus Mb unless thats the issue, but fans show ok in icue
-
6 hours ago, Fiery said:
I suppose when you check AIDA64, iCUE is closed, right? Maybe iCUE changes the fan PWM settings before quitting and/or when you open it. We've checked with default settings on our H150i Pro device, and both fan RPMs and pump RPM are identical across AIDA64 and iCUE.
icue is not closed but i did try it closed and the cooler fan speeds still show higher in AIDA64, is there anything i need to tick or untick in stability , only corsair box that i ticked is the AXI psu box as i have the axi psu
-
7 hours ago, Fiery said:
What is the exact difference between the measured values, at various fan speeds? Maybe there's a 0.5x or 0.33x ratio that has to be applied to the readings?
in icue rpm shows say 900rpm at average but in AIDA64 it shows around 1250rpm its always shows around 300% higher than what it shows in icue
-
have the 5.98 as i was waiting for full support for the cooler, but this issue is the fans speeds are reported higher RPM in AIDA64 ? is there a reason why ?
-
On 07/12/2017 at 6:16 PM, Fiery said:
On your particular motherboard we've already used EC bank switching (before AIDA64 v5.95), but it wasn't safe to do it by default, without any precautions. That's why we've implemented the new EC bank switching option, and made it disabled by default. While EC bank switching is enabled, and you have AI Suite running in the background, things could well go south when AI Suite and AIDA64 collides due to non-synchronized bank switching activity. Of course it would be a whole lot easier if Asus made AI Suite work together with 3rd party monitoring applications, but it doesn't seem to happen anytime soon
not run AI Suite for years, well i tried it again when i got the mb a while ago and it was still flaky,unoptimised as per usual, so getting it to work together will never happen as asus cant even polish AI Suite.
so the my little review of AI Suite = crap lol
oh would be nice to monitor the second fan on the evga FTW2 icx gpu i have, unless its in the pipeline.
-
nice one Fiery all working in alpha display now, why the change? i never needed todo that before.
oh forgot only needed to enable
Embedded Controller (EC) bank switching
-
asus x79 black editon
PCH with a chip icon, pretty sure it did not have Diode at end.
they normally disappear on an update but normally its just re ticking the box or rescan, but its just not there any more,only the Mb temp.
-
just updated to 5.95.4500 and were has the PCH temp gone? its not even showing in temp how, last version i was on was 5.92.4300 and PCH is in that.
-
On 2017-5-15 at 8:01 PM, Fiery said:
We've checked, and unfortunately we haven't found any classic ways of obtaining those values from the video card
iCX must use a custom communication protocol, but we have no idea how it works and how to handle it.
-
On 2017-5-2 at 8:13 AM, Fiery said:
Do you mean that AIDA64 should be able to monitor the 9 temperature sensors managed by iCX? If yes, then we'll need to look into that. Do you know if EVGA's own monitoring software is already capable of monitoring those 9 temperature sensors?
I do mate and yes there own precision x monitors it you can even through up a map diagram were each sensor is that shows temps, only shows one fan speed but there is two speeds (default) but can be set in custom profile or set both the same.
seems like EVGA are replacing all the ACX3.0 for ICX coolers, so it will be worth looking into as others may follow suit.
-
On 2017-3-6 at 4:29 PM, Fiery said:
We're working together with Corsair, NZXT and Asus right now, in order to improve the synchronization (interlocking) between their respective monitoring software and AIDA64. We're glad if you guys can notice the progress
always notice and fixes like that are welcomed indeed, i was going to post about it but the update came out, you beat me too it lol.
one thing i do want to know is are you doing to add EVGA - iCX support ? would not mind adding this to the alpha and mega screens, well some of it
-
There is a new link build out now i.e 4.5.0.55 and it solves bugs on the corsair side
-
The recent corsair link update solved the signal drop out on the i series psu's and the AIO cooler monitoring if peeps would like to know, as i thought it was a combined issue with aida64 and alpha/megtron driver problem my self but thats not the case
-
Please try this link:
nice one ,saves me finding another , works here as well also changed first page to that driver link
-
Just checked the links they are gone
all you need is the USB driver for aida64 , will setup a download link later.use winrar to extract
-
when was the last time there was a reinstall of windows? might be worth upgrading to 10 as its free for now, to me this is not a aida issue as upgrading the mb can throw the sensor detect problem even a badly secured addon card
-
oh support would be nice
-
will do, i ran Hw monitor and the package was the overall temp so really it is pointless having Cpu temp showing just have the cores showing and package
-
run the mem in XMP , the mb in auto config might be setting up the memory wrong i.e volts,timings ect.
Corsair AIO support
in General Discussion
Posted
I've now got the Elite now with that now having a Coolit pump over the older 115i RGB that has the older Asetek pump i take it i untick the Asetek LC sensor support?