MundaneCivilian

Note: SPM = SensorPanel Manager, SP = SensorPanel Current AIDA64 Version: v6.32.5620 Beta - Fresh Installation on 1/31/2021 Problem has been occurring for at least the last 4 Version releases, maybe longer. Most of the time I just shut AIDA64 completely down and ignore it all together as I am getting annoyed with trying to figure out what is the problem. This is the only program on my system that has any issues at all other than LGHub, which is just an absolute trash bin of code. System Specs - As displayed within AIDA64 for best program accuracy CPU Type OctalCore AMD Ryzen 7 3700X, 4400 MHz (44 x 100) Motherboard Name Asus TUF Gaming X570-Plus (Wi-Fi) (3 PCI-E x1, 2 PCI-E x16, 2 M.2, 4 DDR4 DIMM, Audio, Video, Gigabit LAN, WiFi) Motherboard Chipset AMD Bixby X570, AMD K17.7 FCH, AMD K17.7 IMC System Memory 32677 MB DIMM3: G Skill TridentZ F4-3600C16-16GTZNC 16 GB DDR4-3600 DDR4 SDRAM (16-19-19-39 @ 1801 MHz) → Memory Device Properties Form Factor DIMM Type DDR4 Type Detail Synchronous, Unbuffered Size 16 GB Max. Clock Speed 3600 MT/s Current Clock Speed 3600 MT/s Total Width 64-bit Data Width 64-bit Ranks 2 Min. Voltage 1.200 V Max. Voltage 1.200 V Current Voltage 1.200 V Device Locator DIMM_A2 Bank Locator BANK 1 Manufacturer G-Skill Serial Number 00000000 Part Number F4-3600C16-16GTZNC Memory Technology DRAM Memory Operating Modes Volatile Memory Firmware Version Unknown Module Manufacturer ID CD04h Volatile Size 16 GB DIMM4: G Skill TridentZ F4-3600C16-16GTZNC 16 GB DDR4-3600 DDR4 SDRAM (16-19-19-39 @ 1801 MHz) → Memory Device Properties Form Factor DIMM Type DDR4 Type Detail Synchronous, Unbuffered Size 16 GB Max. Clock Speed 3600 MT/s Current Clock Speed 3600 MT/s Total Width 64-bit Data Width 64-bit Ranks 2 Min. Voltage 1.200 V Max. Voltage 1.200 V Current Voltage 1.200 V Device Locator DIMM_B2 Bank Locator BANK 3 Manufacturer G-Skill Serial Number 00000000 Part Number F4-3600C16-16GTZNC Memory Technology DRAM Memory Operating Modes Volatile Memory Firmware Version Unknown Module Manufacturer ID CD04h Volatile Size 16 GB Display Video Adapter GeForce GTX 1080 Ti (11 GB) Video Adapter GeForce GTX 1080 Ti (11 GB) Video Adapter GeForce GTX 1080 Ti (11 GB) Video Adapter GeForce GTX 1080 Ti (11 GB) 3D Accelerator nVIDIA GeForce GTX 1080 Ti Monitor Dell S2716DG (DP) [27" TN LCD] (#ASMAzu0ntsrd) Monitor Generic PnP Monitor [NoDB] (J257M96B00FL) Monitor LG UltraWide (HDMI) (2707242622) Multimedia Audio Adapter nVIDIA GP102 HDMI/DP @ nVIDIA GP102 - High Definition Audio Controller Audio Adapter Realtek ALC1200 @ AMD K17.7 - High Definition Audio Controller Operating System Properties OS Name Microsoft Windows 10 Pro OS Language English (United States) OS Installer Language English (United States) OS Kernel Type Multiprocessor Free (64-bit) OS Version 10.0.19042.746 (Win10 20H2 October 2020 Update) OS Service Pack - OS Installation Date 6/19/2020 OS Root C:\Windows System Driver - As related to AIDA64 Driver Name Driver Description File Name Version Type State AIDA64Driver FinalWire AIDA64 Kernel Driver kerneld.x64 Kernel Driver Running *I believe that is all the the important information needed but ask if you need more. _____________________________ I recently upgraded my system from an Asrock X370 Taichi to a Asus TUF Gaming X570-Plus (Wi-Fi). Although I do not really pay super close attention to everything I have noticed a couple things happening within AIDA64 SPM that stand out. Note: (Only 4 images are used on this layout. 1 Background, 1 MSI, 1 EK Waterpump, 1 360 Rad) All images are PNG but that doesn't seem to matter as this happens with other image types as well. 1. Images loaded through SPM seem to randomly unload/disappear. At times even complete unload/disappearing of ALL images only leaving sensor elements loaded on the screen and only fixed when shutting down and restarting AIDA64. (SS attached) 2. This is just one I noticed since I like to have it shown on my SP Screen, but DIMM Voltage is missing from the SPM but shows in the main windows under Motherboard→SPD, just as it did on the X370. Not sure if other elements/sensors are not showing in SPM. Capture.png is what happens after it completes its unloading/hiding(?) of all images then it throws the Thread creation error and completely freezes AIDA64, requiring a complete shutdown/restart which may or may not fix the issue. Sometimes on a restart of AIDA64 the problem will still be present, sometimes only sensor elements will show and sometimes only a few images will show on the sensor panel. Capture 2.png is after 4 shutdowns and restarts of AIDA64. Each time a different image would be missing. in this one it was the MSI logo image in the Top Right. Tried several more restarts and it still doesn't show. Also after this happens, AIDA64 does not allow you to view any information in the main window of the program. Selecting any option in any category (Summary, Computer name, DMI, IPMI, Overclock, Power Management, etc) will show you the Thread creation error as in the attached screenshot. I really hope we can figure out what is wrong here and get it fixed. Seems to me it's a memory issue within AIDA64, but I am probably wrong as I do not know coding. Thanks for your time.

My First attempt at a panel, gauges came from members here that have posted. Still have several ideas that I wanna use to improve it. 1280x800Panelv1_sensorpanel.ac3fd9e500c912ff02bb13a6b0528e2f

1. Sensor Panel Layout. 2. PNG (didn't try JPEG, apologies) 3. After awhile of testing and making sure I wasn't just exporting it as a dumb file type I think I found the issue. 3a. Exporting the Image using 8bpc (Any variant) gives the above error, but ONLY when using it as a SensorPanel background, 1280x800. This does not occur when using any other sized image. But when I change to 16bpc (again any variant) I don't get the issue. Would just like to note that I have NO clue what I am really doing on the Photo editing side. But I have managed to get my simple SensorPanel up and running. To add to this, I also tried the latest Beta release (6.25.5423) and the problem is there also. Would also like to note that for some reason (This is not just Aida, unless it somehow is interfering with the Sensor data being displayed for other programs). But for some reason since I installed Aida, the only place that shows my TRUE clock speeds is BIOS. I have my Ryzen 5 1600 running at 3.7ghz and 32gigs of 2400 FlareX memory yet the CPU Shows as 3659 now in ANY program that can pull the data and my RAM displays as DDR4-2373. Not really sure what is happening here. Other than that, everyone seems to be working okay.

Can custom Gauges be extracted from uploaded Sensor panel files?

Getting this error when trying to add a image as background that is resized using GIMP. This only happens for larger size images (1280x800) and not smaller images. Also getting the "Thread creation error: Not enough memory resources are available to process this command" Which happens randomly. Sometimes on boot, sometimes when opening Aida, sometimes when accessing ANY menu within Aida, etc. Solution? Version: 6.25.5400