I'm from China.First of all, please forgive my poor English.....
I have a very small itx chassis, and I want to be able to fit a larger OLED display in a limited volume to monitor hardware status.
So I found an OLED display on Taobao,The parameters of the display are as follows
Size: 3.83inch
Resolving power: 320x132
Control chip: Two SSD1320
Interface type: SPI
Pin count: 10
Pin assignment
PIN 1 GND Power grounding
PIN 2 VCC Positive pole of power supply,Range:2.9-3.3V
PIN 3 SCL Clock pin
PIN 4 SDA Data pin
PIN 5 RES Reset pin,Low potential effective
PIN 6 DC Control
PIN 7 CS1 The first one Chip selection
PIN 8 CS2 The second one Chip selection
PIN 9 FR1 The first one Signal synchronization
PIN 10 FR2 The second one Power grounding
Product pictures
To connect this OLED display to the computer,I bought a FT232H module.
Product pictures
So......I found your way to connect the hardware,But they can't work...........
My question
FT232H Can connect two ssd1320?If can connect,How to connect.
How to choose Ft232h driver ,VCP?D2XX?Libusb?
How to set Ft232h pattern in the FT_Prog,like mode?IO pin?
How to set AIDA64,choose api?