Jump to content

Squall Leonhart

Members
 View Profile  See their activity

  • Posts

    382

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by Squall Leonhart

    What is nvidia even doing :|

    in General Discussion

    Posted

    :( But now Driver is corrupting memory, I've had bsods with aida64 and gpu-shark so far, others have with precision and msi ab

     

    Fiery, does AIDA64 refresh sensors when running in the tray but no output panels or lcd's are set up?

    asking because if nvidia tries to repro the bsod issue on aida64 they'll have to do it on the GPU info or Sensors if the refreshing is paused when the window isn't active.

    Laughing at reviewer ignorance!!!

    in Benchmarking, system performance

    Posted

    I was reading a review just now from a certain website, and the reviewer has blamed Aida64 for not being compatible with Threadrippers UMA mode on its less than perfect memory bandwidth.

    This same reviewer went on to bench a bunch of video games in UMA, just because it was the default setting completely ignoring the fact that the NUMA setting is intended for gaming appication.

    He might have well have been advertising for Intel with the gaming scores.

    IMO, its time these has beens leave the hardware journalism business if they don't even understand whats going on anymore.

    dedicated/dynamic Video memory utilisation bugs when utilisation is high.

    in Bug reports

    Posted

    On 3/27/2017 at 6:58 PM, Fiery said:

    The Dedicated Memory and Dynamic Memory information comes from Direct3D statistics API, which doesn't properly support over 4GB video memory under Windows 7.  It was fixed by Microsoft in Windows 8, by extending the counters from 32-bit to 64-bit.  You may want to check the Used Video Memory and Free Video Memory sensor items via OSD Panel or another hardware monitoring module of AIDA64.  They should work better under Windows 7, since they use NVAPI.

    They do, however only the VRAM of the 1080 is returned, this probably comes back to the fact only the primary display driver is listed though, so nothing can be done about that

    dedicated/dynamic Video memory utilisation bugs when utilisation is high.

    in Bug reports

    Posted

    It seems when vram usage passes 4GB, the aida64 values for the used GPU begin showing very low numbers.

     

    This i what i see in Aida64, where GPU-Z and Nvidia Inspector show >4.8GB used.

    Utilization    
    GPU    98%
    Memory Controller    46%
    Video Engine    0%
    Bus Interface    5%
    Dedicated Memory    609 MB
    Dynamic Memory    699 MB

    DirectX Video info shows

    Direct3D Device Properties    
    Total / Free Video Memory    8192 MB / 3385 MB

    • Like 1

    Need some information about the Rampage III Extreme chipset / PCIE distribution

    in General Discussion

    Posted

    Ok, i've got some interesting information on this.

    The chipset page lists the following of a system currently running the marvel sata, jmicron sata, and nec usb 3, with a geforce 550ti and renesas usb 3 card installed in the bottom 16x slot

    PCI Express Controller    
    PCI-E 2.0 x2 port #1    In Use @ x1  (Marvell 88SE9123 SATA 6Gb/s Controller)
    PCI-E 2.0 x2 port #2    In Use @ x1  (NEC uPD720200F1 USB 3.0 Host Controller)
    PCI-E 2.0 x16 port #3    In Use @ x16  (nVIDIA GeForce GTX 550 Ti Video Adapter, nVIDIA GF116 - High Definition Audio Controller) (top most pci-e 16x 2.0 port)
    PCI-E 2.0 x16 port #7    Empty

     

    PCI Express Controller    
    PCI-E 1.0 x1 port #1    Empty
    PCI-E 1.0 x1 port #3    In Use @ x1  (Renesas uPD720201 USB 3.0 Host Controller) (bottom most pci-e 16x 2.0 port)
    PCI-E 1.0 x1 port #5    In Use @ x1  (JMicron JMB363 SATA-II RAID Controller)


    The location of the added usb 3 card is confirmed by device manager, which shows it running off the ich10 pci-e root port, even though it is in the bottom most 16x 2.0 slot.

     

    in my present Rampage II gene setup, i have a XFI soundcard in the second 16x slot, and it is shown as operating off the x58.

    I am therefore led to believe, that unless a card is placed in the 3rd pci-e 16x slot, the 4th one is not actually able to connect to the x58 root hub.

    Crucial MX300 SMART fields

    in Hardware monitoring

    Posted

    All im doing is selecting the MX300 after the MX200 and vice versa and the smart fields come back wrong, some of them duplicated or missing.

    This could just be a Jmicron glitch, or one that only occurs when used with MSAHCI drivers, jmicron drivers are slower and buggy, and don't work with SSD tools well at all.

    Crucial MX300 SMART fields

    in Hardware monitoring

    Posted

    I see you have added the mx300 in the new beta :)

    I am seeing some odd GUI behaviour though when switching between the two ssd's though involving the smart fields

     

    If i select a HDD and then the MX200 or MX300 i see this

    mx200

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Hours Count    0    100    100    15201    OK: Always passes
    0C    Power Cycle Count    0    100    100    84    OK: Always passes
    AB    Program Fail Count    0    100    100    0    OK: Always passes
    AC    Erase Fail Count    0    100    100    0    OK: Always passes
    AD    Wear Leveling Count    0    95    95    178    OK: Always passes
    AE    Unexpected Power Loss Count    0    100    100    76    OK: Always passes
    B4    Unused Reserve (Spare) NAND Blocks    0    0    0    2586    OK: Always passes
    B7    SATA Interface Downshift    0    100    100    15    OK: Always passes
    B8    Error Correction Count    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Enclosure Temperature    0    63    49    51, 24, 37    OK: Always passes
    C4    Re-allocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    SMART Off-line Scan Uncorrectable Error Count    0    100    100    0    OK: Always passes
    C7    Ultra DMA CRC Error Rate    0    100    100    4695    OK: Always passes
    CA    Percentage Of The Rated Lifetime Used    1    95    95    5    OK: Value is normal
    CE    Write Error Rate    0    100    100    0    OK: Always passes
    D2    Successful RAIN Recovery Count    0    100    100    0    OK: Always passes
    F6    Total Host Sector Writes    0    100    100    22.84 TB    OK: Always passes
    F7    Host Program Page Count    0    100    100    1533394129    OK: Always passes
    F8    FTL Program Page Count    0    100    100    282356913    OK: Always passes

    mx300

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Hours Count    0    100    100    154    OK: Always passes
    0C    Power Cycle Count    0    100    100    8    OK: Always passes
    AB    Program Fail Count    0    100    100    0    OK: Always passes
    AC    Erase Fail Count    0    100    100    0    OK: Always passes
    AD    Wear Leveling Count    0    100    100    3    OK: Always passes
    AE    Unexpected Power Loss Count    0    100    100    5    OK: Always passes
    B4    Unused Reserve (Spare) NAND Blocks    0    0    0    1936    OK: Always passes
    B7    SATA Interface Downshift    0    100    100    0    OK: Always passes
    B8    Error Correction Count    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Enclosure Temperature    0    67    51    49, 27, 33    OK: Always passes
    C4    Re-allocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    SMART Off-line Scan Uncorrectable Error Count    0    100    100    0    OK: Always passes
    C7    Ultra DMA CRC Error Rate    0    100    100    0    OK: Always passes
    CA    Percentage Of The Rated Lifetime Used    1    100    100    0    OK: Value is normal
    CE    Write Error Rate    0    100    100    0    OK: Always passes
    D2    Successful RAIN Recovery Count    0    100    100    0    OK: Always passes
    F6    Total Host Sector Writes    0    100    100    860.07 GB    OK: Always passes
    F7    Host Program Page Count    0    100    100    56394814    OK: Always passes
    F8    FTL Program Page Count    0    100    100    16334715    OK: Always passes

     

    However, if i switch from SSD to SSD, it will do this

    mx200

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Hours Count    0    100    100    15201    OK: Always passes
    0C    Power Cycle Count    0    100    100    84    OK: Always passes
    AB    Program Fail Count    0    100    100    0    OK: Always passes
    AC    Erase Fail Count    0    100    100    0    OK: Always passes
    AD    Wear Leveling Count    0    95    95    178    OK: Always passes
    AE    Unexpected Power Loss Count    0    100    100    76    OK: Always passes
    B4    Host Program Page Count    0    100    100    1533394129    OK: Always passes
    B7    SATA Interface Downshift    0    100    100    15    OK: Always passes
    B8    Error Correction Count    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Enclosure Temperature    0    63    49    51, 24, 37    OK: Always passes
    C4    Re-allocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    SMART Off-line Scan Uncorrectable Error Count    0    100    100    0    OK: Always passes
    C7    Ultra DMA CRC Error Rate    0    100    100    4695    OK: Always passes
    CA    Percentage Of The Rated Lifetime Used    1    95    95    5    OK: Value is normal
    CE    Host Program Page Count    0    100    100    56394814    OK: Always passes
    D2    FTL Program Page Count    0    100    100    282357425    OK: Always passes
    F6    Total Host Sector Writes    0    100    100    22.84 TB    OK: Always passes
    F7    Host Program Page Count    0    100    100    1533394129    OK: Always passes
    F8    FTL Program Page Count    0    100    100    282357425    OK: Always passes

     

    mx300

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Hours Count    0    100    100    154    OK: Always passes
    0C    Power Cycle Count    0    100    100    8    OK: Always passes
    AB    Program Fail Count    0    100    100    0    OK: Always passes
    AC    Erase Fail Count    0    100    100    0    OK: Always passes
    AD    Wear Leveling Count    0    100    100    3    OK: Always passes
    AE    Unexpected Power Loss Count    0    100    100    5    OK: Always passes
    B4    Host Program Page Count    0    100    100    1533394129    OK: Always passes
    B7    SATA Interface Downshift    0    100    100    0    OK: Always passes
    B8    Error Correction Count    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Enclosure Temperature    0    67    51    49, 27, 33    OK: Always passes
    C4    Re-allocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    SMART Off-line Scan Uncorrectable Error Count    0    100    100    0    OK: Always passes
    C7    Ultra DMA CRC Error Rate    0    100    100    0    OK: Always passes
    CA    Percentage Of The Rated Lifetime Used    1    100    100    0    OK: Value is normal
    CE    Write Error Rate    0    100    100    0    OK: Always passes
    D2    FTL Program Page Count    0    100    100    282357489    OK: Always passes
    F6    Host Program Page Count    0    100    100    56394814    OK: Always passes
    F7    Unused Reserve (Spare) NAND Blocks    0    0    0    1936    OK: Always passes
    F8    Successful RAIN Recovery Count    0    100    100    0    OK: Always passes

     

    Crucial MX300 SMART fields

    in Hardware monitoring

    Posted

    I recently picked up an MX300 and a number of smart fields are listed as <Vendor - specific>.

    These fields don't seem much unchanged from the mx200,

    From the MX200

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Hours Count    0    100    100    15047    OK: Always passes
    0C    Power Cycle Count    0    100    100    83    OK: Always passes
    AB    Program Fail Count    0    100    100    0    OK: Always passes
    AC    Erase Fail Count    0    100    100    0    OK: Always passes
    AD    Wear Leveling Count    0    95    95    177    OK: Always passes
    AE    Unexpected Power Loss Count    0    100    100    75    OK: Always passes
    B4    Unused Reserve (Spare) NAND Blocks    0    0    0    2586    OK: Always passes
    B7    SATA Interface Downshift    0    100    100    15    OK: Always passes
    B8    Error Correction Count    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Enclosure Temperature    0    62    49    51, 24, 38    OK: Always passes
    C4    Re-allocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    SMART Off-line Scan Uncorrectable Error Count    0    100    100    0    OK: Always passes
    C7    Ultra DMA CRC Error Rate    0    100    100    4695    OK: Always passes
    CA    Percentage Of The Rated Lifetime Used    1    95    95    5    OK: Value is normal
    CE    Write Error Rate    0    100    100    0    OK: Always passes
    D2    Successful RAIN Recovery Count    0    100    100    0    OK: Always passes
    F6    Total Host Sector Writes    0    100    100    22.77 TB    OK: Always passes
    F7    Host Program Page Count    0    100    100    1528632514    OK: Always passes
    F8    FTL Program Page Count    0    100    100    281716231    OK: Always passes

    From the MX300

    ID    Attribute Description    Threshold    Value    Worst    Data    Status
    01    Raw Read Error Rate    0    100    100    0    OK: Always passes
    05    Reallocated Sector Count    10    100    100    0    OK: Value is normal
    09    Power-On Time Count    0    100    100    1    OK: Always passes
    0C    Power Cycle Count    0    100    100    8    OK: Always passes
    AB    <vendor-specific>    0    100    100    0    OK: Always passes
    AC    <vendor-specific>    0    100    100    0    OK: Always passes
    AD    <vendor-specific>    0    100    100    1    OK: Always passes
    AE    <vendor-specific>    0    100    100    5    OK: Always passes
    B4    Host Program Page Count    0    100    100    1528632514    OK: Always passes
    B7    <vendor-specific>    0    100    100    0    OK: Always passes
    B8    End-to-End Error    0    100    100    0    OK: Always passes
    BB    Reported Uncorrectable Errors    0    100    100    0    OK: Always passes
    C2    Temperature    0    60    60    40, 27, 40    OK: Always passes
    C4    Reallocation Event Count    0    100    100    0    OK: Always passes
    C5    Current Pending Sector Count    0    100    100    0    OK: Always passes
    C6    Offline Uncorrectable Sector Count    0    100    100    0    OK: Always passes
    C7    Ultra ATA CRC Error Rate    0    100    100    0    OK: Always passes
    CA    Data Address Mark Errors    1    100    100    0    OK: Value is normal
    CE    Flying Height    0    100    100    0    OK: Always passes   < this field is named wrong for some reason, its the same as the writer error rate field on the mx200.
    D2    FTL Program Page Count    0    100    100    281716279    OK: Always passes
    F6    <vendor-specific>    0    100    100    8116072    OK: Always passes
    F7    <vendor-specific>    0    0    0    1936    OK: Always passes
    F8    Ramp Load Value    0    100    100    0    OK: Always passes

    List of Bugs (Logitech Arx Control)

    in Bug reports

    Posted

    I would like to be able to hide the LCD items for sensors not currently detected or reporting values.

     

    I have a portable hdd that i watch the temp of on my g510 lcd, which reports HD4N/A, with the N/A actually overlapping the name of the sensor, this updates to the temperature of the drive when it is plugged in, but having the n/a visible in the first place is an eyesore.

×
×
  • Create New...