56k Posted June 9, 2013 Share Posted June 9, 2013 Hi. So, as the title says, wrong temps. My BIOS reports the correct temps I think (37-40 celsius) but then, when I start AIDA in Windows, I see values like 11-25 celsius... I think that is not true since I am using air cooling.. As said, my motherboard is TA75A+. I saw there is another topic too with same problem. Also, there is one thing. When i run stability test, AIDA reports my CPU is 46-48 celsius while doing that. The thing is that, is this reliable value then when CPU is under load or should I try to reset my PC and go to BIOS fast and look the "right" temp? CPU is AMD A8-3870K. Here is temps before stability test. And here is while stability test is running. The question is that, are those values while CPU is under load any reliable or are they wrong? While idle or normal using they are clearly wrong like you see in first picture. But under load temps, are they any correct? What could this problem be? It is not anything serious, since BIOS reads it correctly and controls the fan correct too. So nothing wrong in hardware, only something is wrong in software. BIOS knows the right temp, controls fan good so no overheating happening. (as you see the CPU fan raised from 800 to 1200rpm in pictures) Software just doesn't read temps correct.. If it does matter what cooler I use, my cooler is Thermalright True Spirit 120. If more info needed, I will give them. Edit: I decided to do reset while running stability test and go to BIOS and BIOS showed CPU Temp as 45 celsius. I reseted my PC when CPU was at 48 celsius. Sure CPU cools few celsius' down while it's not on load while going to BIOS. So it looks like while CPU is on load, the temp is quite correct like it should in AIDA... But while in normal usage, it is wrong in AIDA. But BIOS knows always the right temp. When I start my computer when it has not been used, BIOS reports temps about 29-35 celsius usually when starting up (It's quite warm in my room) and I'm quite sure this is correct. But then AIDA reads temp wrong in normal use/idle. While CPU is on load it looks like AIDA reads temp quite correct.. What causes this? And sorry for my bad english.. This story in short: BIOS reads correct temp always, AIDA doesn't. (Except when CPU is load maybe?) Quote Link to comment Share on other sites More sharing options...
Fiery Posted June 11, 2013 Share Posted June 11, 2013 Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic. Using that data we may be able to calibrate the AIDA64 sensor module to better support your motherboard. But please note that the core temperatures are measured via the on-die temperature diode of your processor. And most FM1, FM2 and AM3+ socket based AMD processors feature a hardware issue in their temperature diodes that yields to very low temperature readouts at idle -- usually way below ambient (room) temperature. The measured core temperatures only make sense when the CPU is under load. Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
56k Posted June 12, 2013 Author Share Posted June 12, 2013 ------[ AIDA64 v3.00.2500 ]------ ------[ Microsoft Windows 7 Home Premium 6.1.7601.18113 Service Pack 1 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : 63-0100-000001-00101111-102010-Chipset$PROJECTTAG003_BIOS DATE: 04/12/12 10:35:01 VER: 04.06.04 Motherboard Model : Biostar TA75A+ Motherboard Chipset : AMD A75, AMD K12 DMI MB Manufacturer : BIOSTAR Group DMI MB Product : TA75A+ DMI MB Version : DMI MB Serial : None DMI SYS Manufacturer: BIOSTAR Group DMI SYS Product : TA75A+ DMI SYS Version : DMI SYS Serial : None DMI BIOS Version : 4.6.4 ITE 87xx Port = 2Eh ITE 87xx HWMonitor Port = 0E80h ITE 87xx Device ID = 8728h ITE 87xx Version = 00h Winbond SuperIO Port = 00h Winbond SuperIO HWMonitor Port/60 = 0000h Winbond SuperIO HWMonitor Port/64 = 0000h Winbond SuperIO Device ID = FFFFh Fintek SuperIO Port = 00h Fintek SuperIO HWMonitor Port = 0000h Fintek SuperIO Device ID = 0000h LPC47 SuperIO HWMonitor Port = 0000h LPC47 SuperIO Device ID = FFFFh ------[ LM78 ISA Sensor Device at 0E80 ]------ 0000 13 14 00 00 FF FF FE FF FF FF 48 0F 0F F1 4C FF 0010 B4 A7 5E 77 C7 00 00 80 02 02 FF E3 31 A9 A9 A9 0020 4D 83 EE EB 61 B9 B9 8A 8C 07 20 B0 80 30 C0 C0 0030 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 0040 46 7F 7F 7F 7F 7F 5F 40 AD 6A D4 00 FF FF FF FF 0050 FF 07 7F 7F 7F 40 00 FB 90 F6 3D 12 60 00 00 00 0060 7F 7F 7F FF 00 02 00 FF 7F 7F 7F FF 00 02 00 FF 0070 0A 14 46 48 20 02 00 FF FF FF FF FF FF FF FF FF 0080 00 00 00 00 00 00 00 00 0B 30 01 02 01 00 E1 00 0090 FF 00 00 00 FF 00 00 00 42 99 00 00 01 B3 52 07 00A0 00 2A 2A 2A 2A 2A 2A FF FF FF FF FF FF FF FF FF 00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0029 002A 002B T: 21 32 176 T: 21 32 176 T: 21 32 176 T: 21 32 176 T: 20 32 176 T: 19 32 176 T: 18 32 176 T: 17 32 176 T: 16 32 176 T: 15 32 176 Reg$20 CPU Core: r = 77, r*0.016 = 1.23 Reg$21 CPU Aux: r = 131, r*0.016 = 2.10 Reg$22 +3.3 V: r = 238, r*0.016 = 3.81 Reg$23 +5 V: r = 235, r*0.016 = 3.76 Reg$24 +12 V: r = 97, r*0.016 = 1.55 Reg$25 -12 V: r = 185, r*0.016 = 2.96 Reg$26 -5 V: r = 185, r*0.016 = 2.96 ------[ Hudson-2/3 PM2 at 0CD0 ]------ 0000 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0010 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0020 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0030 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0040 06 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0060 1F 00 00 00 00 00 01 00 00 FF FF 01 00 00 FF FF 0070 01 00 00 FF FF 01 00 00 FF FF 01 00 00 FF FF FF 0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0090 00 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00A0 00 00 00 00 00 00 00 00 00 FF FF 00 00 00 00 00 00B0 00 FF 55 55 FF 00 00 FF 00 00 00 00 00 00 00 00 00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00D0 00 00 00 00 00 00 00 00 FF FF FF FF FF 00 FF 00 00E0 00 00 00 00 00 00 02 00 00 FF 8C 1F 80 FF 1F 0A 00F0 19 0A 02 05 C8 20 80 00 05 06 00 00 08 08 00 02 Reg$59VIN0: r = $FFFF, r*0.000046 = 3.0146 Reg$5DVIN1: r = $FFFF, r*0.000046 = 3.0146 Reg$61VIN2: r = $0000, r*0.000046 = 0.0000 Reg$65VIN3: r = $0100, r*0.000046 = 0.0118 Reg$69VIN4: r = $FFFF, r*0.000046 = 3.0146 Reg$6DVIN5: r = $FF00, r*0.000046 = 3.0029 Reg$71VIN6: r = $0000, r*0.000046 = 0.0000 Reg$75VIN7: r = $0001, r*0.000046 = 0.0000 ------[ Hudson-2/3 PM at 0CD6 ]------ 0000 0E 00 4F 4A 00 04 00 02 34 05 04 02 06 21 43 55 0010 FF 0F 00 00 FF 0F 00 00 00 00 00 00 00 00 00 00 0020 00 00 D1 FE 01 00 D8 FE 25 0B 80 00 01 0B 00 00 0030 00 00 00 00 07 00 C0 FE 0C 00 00 00 00 00 00 00 0040 00 00 00 00 00 00 00 88 F1 00 C0 FE 03 00 00 00 0050 1F 00 D0 FE D0 00 00 97 01 FF 15 44 00 05 00 07 0060 00 08 04 08 08 08 10 08 20 08 B2 00 00 FE BA 00 0070 00 00 00 00 17 00 00 4D FF FF 00 00 FF FF E0 80 0080 00 18 26 20 00 00 00 00 00 00 00 00 9E 00 80 00 0090 02 05 02 0B 01 00 10 00 00 10 00 01 00 00 00 00 00A0 02 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00B0 00 00 8A 00 80 00 05 05 88 00 08 40 02 00 53 C0 00C0 F9 07 58 40 2C 02 00 00 0C 40 28 00 F9 FF FF FF 00D0 00 F4 38 BF 00 00 20 00 15 00 91 00 01 00 10 03 00E0 D8 0C 00 00 00 00 00 02 00 00 00 01 03 17 00 CF 00F0 9D 73 07 00 00 00 00 21 2C 07 00 00 00 00 00 00 ------[ ACPI Temperatures & Fans ]------ _TZ_.THM0._TMP : _TZ_.THM1._TMP : _TZ_.THR0._TMP : _TZ_.THR1._TMP : _TZ_.TZ00._TMP : _TZ_.TZ01._TMP : _TZ_.RTMP : _TZ_.RFAN : _TZ_.RFAN(0) : _TZ_.RFAN(1) : _SB_.ATKD._HID : _SB_.ATKD.TMPR : _SB_.PCI0.LPC0.EC0_.CCTV : _SB_.PCI0.LPC0.EC0_.LRPM : _SB_.PCI0.LPC0.EC0_.HRPM : _SB_.PCI0.SBRG.EC0_.ECPU : _SB_.PCI0.SBRG.EC0_.TACH(0): _SB_.PCI0.SBRG.EC0_.TACH(1): _SB_.PCI0.SBRG.EC0_.TAH0 : _SB_.PCI0.SBRG.EC0_.TAH1 : _SB_.PCI0.SBRG.EC0_.ST00 : _SB_.PCI0.SBRG.EC0_.SC01 : _SB_.PCI0.SBRG.EC0_.SC02 : _SB_.PCI0.SBRG.EC0_.SC03 : _SB_.PCI0.SBRG.EC0_.SC04 : _SB_.PCI0.SBRG.EC0_.SC05 : _SB_.PCI0.SBRG.EC0_.SC06 : _SB_.PCI0.PIB_.EC0_.TCRT : _SB_.PCI0.SBRG.EC0_.CTPM : _SB_.PCI0.SBRG.EC__.CPUT : _SB_.PCI0.SBRG.EC__.SYST : _SB_.PCI0.LPC_.EC0_.CTMP : _SB_.PCI0.LPCB.EC0_.CTMP : _SB_.PCI0.LPC_.EC0_.TMP1 : _SB_.PCI0.LPC_.EC0_.TMP2 : _SB_.PCI0.LPC_.EC0_.TMPI : _SB_.PCI0.LPC_.EC0_.TMPV : _SB_.PCI0.LPCB.EC0_.A1TP : _SB_.PCI0.LPCB.EC0_.A2TP : _SB_.PCI0.LPCB.EC0_.FAN0 : _SB_.PCI0.LPCB.EC__.TS1R : _SB_.PCI0.LPCB.EC__.TS2R : _SB_.PCI0.LPCB.EC__.TS3R : _SB_.PCI0.LPCB.EC__.F1FL : _SB_.PCI0.LPCB.EC__.F1FH : _SB_.PCI0.LPCB.EC__.F2FL : _SB_.PCI0.LPCB.EC__.F2FH : _SB_.PCI0.LPC_.H8EC.RTMP : _SB_.PCI0.LPC_.H8EC.LTMP : _SB_.PCI0.LPC_.H8EC.MTMP : _SB_.PCI0.LPC_.H8EC.GTMP : _SB_.PCI0.LPCB.H8EC.CTMP : _SB_.PCI0.LPCB.H8EC.DTMP : _SB_.PCI0.LPCB.H8EC.GTMP : _SB_.PCI0.LPCB.H8EC.ITMP : _SB_.PCI0.LPCB.H8EC.MTMP : _SB_.PCI0.LPCB.H8EC.STMP : _SB_.PCI0.LPCB.H8EC.PFAN : _SB_.PCI0.LPCB.EC0_.OTPC : _SB_.PCI0.LPCB.EC0_.VGAT : _SB_.PCI0.LPCB.EC0_.CHPT : _SB_.PCI0.LPCB.EC0_.CPUT : _SB_.PCI0.LPCB.EC0_.SYST : _SB_.PCI0.LPCB.EC0_.DTS1 : _SB_.PCI0.LPCB.EC0_.DTS2 : _SB_.PCI0.LPCB.EC0_.DIMM : _SB_.PCI0.LPCB.EC0_.FANH : _SB_.PCI0.LPCB.EC0_.FANL : _SB_.PCI0.LPCB.EC0_.CUTP : _SB_.PCI0.LPCB.EC0_.PHTP : _SB_.PCI0.LPCB.EC0_.DIMT : _SB_.PCI0.LPCB.EC0_.INLE : _SB_.PCI0.LPCB.EC0_.PANT : _SB_.PCI0.LPCB.EC0_.F0RM : _SB_.PCI0.LPCB.EC0_.F0DT : _SB_.PCI0.LPCB.EC0_.F1RM : _SB_.PCI0.LPCB.EC0_.F1DT : There is ISA Sensor Dump. And yes, that what you said happens. Way below ambient room temp like you said and makes sense when under load. Quote Link to comment Share on other sites More sharing options...
Fiery Posted June 17, 2013 Share Posted June 17, 2013 Thank you. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2514g5l8npfkxbzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works Quote Link to comment Share on other sites More sharing options...
56k Posted June 19, 2013 Author Share Posted June 19, 2013 Hi, I upgraded and rebooted. Still, I have low temps. Quote Link to comment Share on other sites More sharing options...
Fiery Posted June 19, 2013 Share Posted June 19, 2013 Thank you for the feedback. As I wrote above... "But please note that the core temperatures are measured via the on-die temperature diode of your processor. And most FM1, FM2 and AM3+ socket based AMD processors feature a hardware issue in their temperature diodes that yields to very low temperature readouts at idle -- usually way below ambient (room) temperature. The measured core temperatures only make sense when the CPU is under load" ... core temperatures are independent from motherboard sensor calibration, and the issue you experience cannot be fixed from software, since it's a hardware issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.