AIDA64 version 7.50.7200 breaks on Intel Core i5-12450H mini PC

[bobg2222]

I have a mini PC with a Core i5-12450H CPU and 16gB of memory. When I got the notification that AIDA64 7.50.7200 was available, I let it install (I did this also on two other computers I have and there have been no problems with them).

On the mini PC, I have an AX206 LCD display used by AIDA64. I have one PNG file with extra info which is added to the display and updates now and then.

I soon noticed I was getting "Thread creation error. Not enough storage is available to process this command" popups, possibly corresponding to when that PNG updates.

But it was actually much worse! I can barely do anything with AIDA without getting that "Thread creation..." popup. If I right click on the icon in the system tray and choose Preferences, I get the popup. If I double click on the icon (so the full AIDA64 interface comes up), then choose Help/Check for updates, I get the "Thread creation..." popup--and the update check dialog doesn't do anything; it doesn't check for updates.

I finally backed off to the previous version 7.40.7100 and everything is back to normal and works fine.

I'm attaching the sensor dump. 

isasensordump.txt

[Fiery]

1 hour ago, bobg2222 said:

I have a mini PC with a Core i5-12450H CPU and 16gB of memory. When I got the notification that AIDA64 7.50.7200 was available, I let it install (I did this also on two other computers I have and there have been no problems with them).

On the mini PC, I have an AX206 LCD display used by AIDA64. I have one PNG file with extra info which is added to the display and updates now and then.

I soon noticed I was getting "Thread creation error. Not enough storage is available to process this command" popups, possibly corresponding to when that PNG updates.

But it was actually much worse! I can barely do anything with AIDA without getting that "Thread creation..." popup. If I right click on the icon in the system tray and choose Preferences, I get the popup. If I double click on the icon (so the full AIDA64 interface comes up), then choose Help/Check for updates, I get the "Thread creation..." popup--and the update check dialog doesn't do anything; it doesn't check for updates.

I finally backed off to the previous version 7.40.7100 and everything is back to normal and works fine.

I'm attaching the sensor dump. 

isasensordump.txt 6.64 kB · 0 downloads

Can you please check if the issue persists when you have the PNG file hidden on your LCD layout?

[bobg2222]

I just let it upgrade back to 7.50.7200--and even rebooted. I didn't make any other changes and so far I can bring up Preferences or check for updates without the "Thread creation..." error. I've also forced changes to the PNG and that's also working fine.

So, I'm scratching my head right now! Maybe AIDA64 has to run for a while before problems start popping up? I will keep you posted whatever happens.
 

If the error does reappear, what do you mean by hiding the PNG file?

[bobg2222]

I checked that machine after running 7.50.7200 about 6 hours and had the "Thread creation..." error sitting on the screen. Also, all the same symptoms I described above. In addition to that, I was going to just remove the PNG file (on the Preferences/LCD/LCD Items) so I double clicked on that item in the list and got a popup with the title "AIDA64 Extreme" and the message:

   System Error. Code: 1158
   The current process has used all of its system allowance of
   handles for Window Manager objects.

I could get that every time I double clicked the PNG item or clicked the modify button. I finally clicked the delete button and the PNG item went away.

Then I exited from AIDA64, restarted it...and lost all my settings! Now there's no LCD items, it didn't start in the system tray, etc. Everything is gone!

Got any suggestions about how to recover from that?

UPDATE: I backed off on the version again, but still didn't have my settings. Fortunately, i back up that machine regularly, so I got a copy of AIDA64.ini from before the loss of settings and copied it into the AIDA64 install directory. I STILL did not have my settings. Eventually, I found that there was an AIDA64.ini in ...\AppData\Local\Finalwire (with a date/time corresponding to when I had restarted it and lost the settings)--but not on any of the other machines where I run AIDA64. So, I deleted that FinalWire directory and all my settings came back. Whew!

I would be very reluctant at this point to go back to the latest version again. It's VERY unstable on that machine for some reason.

Edited Thursday at 07:54 AM by bobg2222

[Fiery]

8 hours ago, bobg2222 said:

I checked that machine after running 7.50.7200 about 6 hours and had the "Thread creation..." error sitting on the screen. Also, all the same symptoms I described above. In addition to that, I was going to just remove the PNG file (on the Preferences/LCD/LCD Items) so I double clicked on that item in the list and got a popup with the title "AIDA64 Extreme" and the message:

   System Error. Code: 1158
   The current process has used all of its system allowance of
   handles for Window Manager objects.

I could get that every time I double clicked the PNG item or clicked the modify button. I finally clicked the delete button and the PNG item went away.

Then I exited from AIDA64, restarted it...and lost all my settings! Now there's no LCD items, it didn't start in the system tray, etc. Everything is gone!

Got any suggestions about how to recover from that?

UPDATE: I backed off on the version again, but still didn't have my settings. Fortunately, i back up that machine regularly, so I got a copy of AIDA64.ini from before the loss of settings and copied it into the AIDA64 install directory. I STILL did not have my settings. Eventually, I found that there was an AIDA64.ini in ...\AppData\Local\Finalwire (with a date/time corresponding to when I had restarted it and lost the settings)--but not on any of the other machines where I run AIDA64. So, I deleted that FinalWire directory and all my settings came back. Whew!

I would be very reluctant at this point to go back to the latest version again. It's VERY unstable on that machine for some reason.

Thank you for the test run. We still need to make sure the issue is the PNG file.  It may be best if you renamed the PNG file in the layout directory so AIDA64 would be unable to load it.

[bobg2222]

While still running the older version of AIDA64, I deleted the PNG file at Preferences/LCD Items, so it no longer knows about the file at all. Then I upgraded to version 7.50.7200. It's been about 12 hours now, and there have been no problems. I checked a few times and there have been no "Thread creation..." popups or any other errors. Also, I can start up Preferences or check for updates, etc. with no problems. So, I guess the problem must have something to do with loading that PNG file.

Note: I also have other PNG files which are still being loaded. They are images for custom gauges I use for fans and a CPU temp heatmap. The difference, of course, is that the troublesome image is type Image, but the gauges are type Custom Gauge.

I also haven't mentioned that all my machines are running Windows 10 with all the latest updates.

[Fiery]

2 hours ago, bobg2222 said:

While still running the older version of AIDA64, I deleted the PNG file at Preferences/LCD Items, so it no longer knows about the file at all. Then I upgraded to version 7.50.7200. It's been about 12 hours now, and there have been no problems. I checked a few times and there have been no "Thread creation..." popups or any other errors. Also, I can start up Preferences or check for updates, etc. with no problems. So, I guess the problem must have something to do with loading that PNG file.

Note: I also have other PNG files which are still being loaded. They are images for custom gauges I use for fans and a CPU temp heatmap. The difference, of course, is that the troublesome image is type Image, but the gauges are type Custom Gauge.

I also haven't mentioned that all my machines are running Windows 10 with all the latest updates.

Thank you for the test run.  Have you produced all the PNG images in the same way, e.g. using the same image manipulation software?  Do they all share the same format, e.g. 32-bit PNG?

[bobg2222]

All (Gauges and the troublesome image) are 32-bit PNGs. The gauges were created with Inkscape and exported as PNGs. The image is created dynamically by a small C# program (but is also 32-bit PNG).

Given the errors I've documented here--and the fact that it takes a few hours after starting AIDA64 for problems to show up--I'm wondering if for Image type files, you're not freeing Windows handles? Mine is updating every 5 seconds, so that would be a LOT of unfreed handles after a few hours!