Fiery Posted February 4 Posted February 4 We've added support for Turing (Turzx) displays. It works with the following models: - Turing 2.1-inch (480x480 pixels) - Turing 3.5-inch (480x320 pixels) - Turing 5-inch (800x480 pixels) - Turing 7-inch (1024x600 pixels) - Turing 8.8-inch (1920x480 pixels) You can enable the LCD device from AIDA64 / Preferences / Hardware Monitoring / LCD / Turing. You can check it out in the latest AIDA64 beta build at: https://www.aida64.com/downloads/latesta64xebeta Please let us know if you find any difficulties enabling or using this new feature. Also let us know if you've got another kind of LCD device that is currently unsupported by AIDA64. Regards, Fiery 1 Quote
BHSY Posted February 7 Posted February 7 Finally, I have the time to test the TURZX display. I tried it on my Turing 8.8-inch (1920x480 pixels), and it works. However, when I put Windows to sleep mode, the device woke up Windows immediately. The only way I can do now is to rely on the TURZX software to 'Exit the software and shut down the device'. Can the device be put to sleep and prevented from waking up Windows without relying on the TURZX software? Thanks! Quote
Fiery Posted February 7 Author Posted February 7 6 hours ago, BHSY said: Finally, I have the time to test the TURZX display. I tried it on my Turing 8.8-inch (1920x480 pixels), and it works. However, when I put Windows to sleep mode, the device woke up Windows immediately. The only way I can do now is to rely on the TURZX software to 'Exit the software and shut down the device'. Can the device be put to sleep and prevented from waking up Windows without relying on the TURZX software? Thanks! Are you sure it's the Turing device that wakes the system up? We've checked it with a 8.8-inch Turing screen and it never wakes the system up. What AIDA64 does is when it senses that the computer is about to go to sleep, it blanks the screen and stops communicating with LCD devices. And it only resumes handling the screens once the computer resumed back from sleep. Quote
BHSY Posted February 7 Posted February 7 27 minutes ago, Fiery said: Are you sure it's the Turing device that wakes the system up? We've checked it with a 8.8-inch Turing screen and it never wakes the system up. What AIDA64 does is when it senses that the computer is about to go to sleep, it blanks the screen and stops communicating with LCD devices. And it only resumes handling the screens once the computer resumed back from sleep. Yes, it was the Turing device that woke the system up. I forgot to mention I connected the device to a 9-pin USB port. When I put my computer to sleep, the screen went blank, but a few seconds later, my computer woke up. Even without using the AIDA64, the device would wake up the system. Every time I use the device, I rely on the TURZX software to 'Exit the software and shut down the device'. I forgot to try connecting using USB type C to USB type A. When I'm free, I'll try it out and let you know. Quote
Fiery Posted February 7 Author Posted February 7 1 hour ago, BHSY said: Yes, it was the Turing device that woke the system up. I forgot to mention I connected the device to a 9-pin USB port. When I put my computer to sleep, the screen went blank, but a few seconds later, my computer woke up. Even without using the AIDA64, the device would wake up the system. Every time I use the device, I rely on the TURZX software to 'Exit the software and shut down the device'. I forgot to try connecting using USB type C to USB type A. When I'm free, I'll try it out and let you know. Please check the following new beta update of AIDA64: https://www.aida64.com/downloads/latesta64xebeta This version will turn the screen off when you close AIDA64 or when the computer goes to sleep. Let me know how it works. 1 Quote
BHSY Posted February 7 Posted February 7 37 minutes ago, Fiery said: Please check the following new beta update of AIDA64: https://www.aida64.com/downloads/latesta64xebeta This version will turn the screen off when you close AIDA64 or when the computer goes to sleep. Let me know how it works. Hey! The new beta link update works😃. It switched off the screen when I quit AIDA64, and my computer no longer woke up from sleep mode. Thank you. Quote
Fiery Posted February 7 Author Posted February 7 7 minutes ago, BHSY said: Hey! The new beta link update works😃. It switched off the screen when I quit AIDA64, and my computer no longer woke up from sleep mode. Thank you. Awesome! Thank you for your feedback 1 Quote
pgomespxo Posted February 8 Posted February 8 (edited) Tested and working on 3.5 inch Turzx/Turing. Well done team 👍🏻 Edited February 8 by pgomespxo Updated photo Quote
Fiery Posted February 8 Author Posted February 8 7 hours ago, pgomespxo said: Tested and working on 3.5 inch Turzx/Turing. Well done team 👍🏻 Thank you for your feedback! Quote
Mehmet Kral Posted February 14 Posted February 14 thanks... my 3.5 inc monitor that I wasn't sure was turing now worked. thanks Aida. greetings from Turkey. Quote
Fiery Posted February 14 Author Posted February 14 57 minutes ago, Mehmet Kral said: thanks... my 3.5 inc monitor that I wasn't sure was turing now worked. thanks Aida. greetings from Turkey. Awesome! Thank you for your feedback. 1 Quote
Mehmet Kral Posted February 15 Posted February 15 2/14/2025 saat 11: 27'de Fiery dedi: Mükemmel! Geri bildiriminiz için teşekkür ederiz. Hello, I wonder if there is a way to add air information to the sensor panel. Quote
pgomespxo Posted February 15 Posted February 15 Im sharing my 3.5 inch template https://limewire.com/d/e80363da-1f26-44f0-93ae-a6a3420d8068#PomdjX2ya-uOV5mImkI5L4HTHNrX53jomOOt_3iQx1E Hope you like it 😀 Note: Any .sensorpanel file will work, you just need to rename it from .sensorpanel to .tulcd and make sure the file is for your required screen size 1 Quote
Hoang Si Posted February 16 Posted February 16 On 2/8/2025 at 8:15 AM, pgomespxo said: Tested and working on 3.5 inch Turzx/Turing. Well done team 👍🏻 please help me to use aida64, i bought turning smart screen 3.5 inch, it has only type c usb. i dont know how to use aida64 to display screen like u. tks u. it only display white screen when the type c cable connected. Update: win 7 cannot use, i reinstall win 10, then everything worked very well. Quote
artur-com Posted Sunday at 07:06 PM Posted Sunday at 07:06 PM 22 hours ago, pgomespxo said: Note: Any .sensorpanel file will work, you just need to rename it from .sensorpanel to .tulcd and make sure the file is for your required screen size Thanks for sharing first screen for Turzx screen. I have noticed that. All sensorpanels files are compatible, and the only difference is the file name extension. I don't understand developer intention of diversity. Furthermore, I have found on the forum some 800 x 480 panels and customized for me. The screen now works like a rocket. I am so happy. Quote
Fiery Posted Monday at 08:20 AM Author Posted Monday at 08:20 AM On 2/15/2025 at 1:10 PM, Mehmet Kral said: Hello, I wonder if there is a way to add air information to the sensor panel. I'm not sure what "air information" means. Can you please explain your request with more details? Quote
artur-com Posted Monday at 03:05 PM Posted Monday at 03:05 PM 6 hours ago, Fiery said: I'm not sure what "air information" means. Can you please explain your request with more details? Could be PM2.5 or just weather condition. Imagine having present weather condition icon on sensor panel 🤩 Quote
AKINLASINN Posted Tuesday at 01:28 PM Posted Tuesday at 01:28 PM On 14.02.2025 at 10:29, Mehmet Kral said: teşekkürler... turing olup olmadığından emin olmadığım 3.5 inç monitörüm artık çalıştı. teşekkürler Aida. Türkiye'den selamlar. Hangi sürüm aida64 yüklemek lazım bu ekranı desteklemesi için acaba? Quote
Fiery Posted Tuesday at 01:36 PM Author Posted Tuesday at 01:36 PM 8 minutes ago, AKINLASINN said: Hangi sürüm aida64 yüklemek lazım bu ekranı desteklemesi için acaba? AIDA64 v7.60 (latest version). 1 Quote
Jupy Posted Tuesday at 06:02 PM Posted Tuesday at 06:02 PM I have 5 inch version, but when i try to activate the support in aida64 it shows me "error: LCD open failed" I have the turzx app that starts with windows...shoul i have to remove it? Thank you Quote
Fiery Posted Wednesday at 08:54 AM Author Posted Wednesday at 08:54 AM 14 hours ago, Jupy said: I have 5 inch version, but when i try to activate the support in aida64 it shows me "error: LCD open failed" I have the turzx app that starts with windows...shoul i have to remove it? Thank you Yes, you need to close the Turzx app to let AIDA64 gain access to the LCD. Quote
Jupy Posted Thursday at 07:00 AM Posted Thursday at 07:00 AM 21 hours ago, Fiery said: Yes, you need to close the Turzx app to let AIDA64 gain access to the LCD. Thank you. I did it, it worked for a while, even if i have issues because it seems that i have problem to turn it on/off (it hangs), but i think is something system/motherboard/screen related. Let's go deep! i saw that the 8.8 inches screen uses a different executable, "UsbMonitorS.exe" instead of "UsbMonitorL.exe" of the 5 inches...is it possible to use both screens one with native app and one with aida? Thank you Quote
Fiery Posted Thursday at 09:22 AM Author Posted Thursday at 09:22 AM 2 hours ago, Jupy said: Thank you. I did it, it worked for a while, even if i have issues because it seems that i have problem to turn it on/off (it hangs), but i think is something system/motherboard/screen related. Let's go deep! i saw that the 8.8 inches screen uses a different executable, "UsbMonitorS.exe" instead of "UsbMonitorL.exe" of the 5 inches...is it possible to use both screens one with native app and one with aida? Thank you Yes, it is possible. 1 Quote
Angel Silver Posted Thursday at 10:12 PM Posted Thursday at 10:12 PM Finally, thank you gentlemen. 😁 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.