DracoCW Posted Monday at 03:38 PM Posted Monday at 03:38 PM 7 minutes ago, Fiery said: Thank you, we'll get one too. If it helps, I have attached a picture of the package the screen came in. Quote
Fiery Posted Monday at 03:43 PM Author Posted Monday at 03:43 PM 3 minutes ago, DracoCW said: If it helps, I have attached a picture of the package the screen came in. Thank you! It's quite interesting that the package is similar to the original Turzx 8.8-inch screen package, but the device itself has a different firmware -- and perhaps a different hardware too. Quote
n0130dykn0ws Posted Tuesday at 12:25 AM Posted Tuesday at 12:25 AM Anytime I reboot, sleep, hibernate or disconnect the WOWNOVA 5" from Amazon the display freezes/distorts the panels. It works fine if I exit and launch AIDA64 again. I have not used the included SD card, installed any software or firmware from Turzx. Currently using the USB-C connection for testing but plan to use the 9 pin on a new build. AIDA64 Build: 7.60.7317 Beta // Windows 11 It feels like it has some kind of USB initializing problem. I'm not sure if there are any settings in AIDA64 or device manager that would help. Has anyone experienced this issue and also is the SD card needed at all? Thanks! Quote
Amr0d Posted Tuesday at 07:22 PM Posted Tuesday at 07:22 PM (edited) On 3/25/2025 at 10:33 PM, Fiery said: Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. It works like a charm 😄 Thank you very much. This is amazing now! //edit I got my display from the same AliExpress seller as @DracoCW btw. It has the same packaging. Not sure why mine works and his does not. Edited Tuesday at 07:23 PM by Amr0d Quote
Fiery Posted Tuesday at 07:45 PM Author Posted Tuesday at 07:45 PM 19 hours ago, n0130dykn0ws said: Anytime I reboot, sleep, hibernate or disconnect the WOWNOVA 5" from Amazon the display freezes/distorts the panels. It works fine if I exit and launch AIDA64 again. I have not used the included SD card, installed any software or firmware from Turzx. Currently using the USB-C connection for testing but plan to use the 9 pin on a new build. AIDA64 Build: 7.60.7317 Beta // Windows 11 It feels like it has some kind of USB initializing problem. I'm not sure if there are any settings in AIDA64 or device manager that would help. Has anyone experienced this issue and also is the SD card needed at all? Thanks! We've tested it with our Turzx 5-inch display, and it worked fine with both sleep and disconnect/connect. In AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Thanks, Fiery Quote
n0130dykn0ws Posted Tuesday at 11:10 PM Posted Tuesday at 11:10 PM 3 hours ago, Fiery said: We've tested it with our Turzx 5-inch display, and it worked fine with both sleep and disconnect/connect. In AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Thanks, Fiery I have confirmed now that the issue only occurs when I have rotation enabled in LCD options. usbdump.txt Quote
Monkeys86 Posted yesterday at 11:46 AM Posted yesterday at 11:46 AM Ragazzi ho comprato un lcd turzx, ho visto che aida64 lo supporta ora con la beta, ma quando provo ad attivarlo nelle preferenze lcd di turing mi da errore porta com, l'ho collegato a usb sulla scheda madre e per questo devo collegarlo a usb esterna, o sto sbagliando qualcosa?? Per favore aiutatemi @ardente Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.