Missing Fan Speed Sensor Data (Asus Pro WS WRX80E-Sage SE WiFi II)

[beas62]

I've been using AIDA64 for years, but with my new subscription and updates, I've lost the ability to monitor fans.  Note that the fans show up in MANY free and open-source programs (Speedfan, HWInfo, etc., just not AIDA.  Fan data comes from IPMI on my ASUS WRX80E Sage Wifi II.  AIDA does "see" IPMI and can actually display IPMI logs, but there is no way to select the fan sensors for OSD or in-app display.  Using the latest Beta after the stable did not work.  v7.60.7311   Any fixes?  Thanks.

[Fiery]

16 hours ago, beas62 said:

I've been using AIDA64 for years, but with my new subscription and updates, I've lost the ability to monitor fans.  Note that the fans show up in MANY free and open-source programs (Speedfan, HWInfo, etc., just not AIDA.  Fan data comes from IPMI on my ASUS WRX80E Sage Wifi II.  AIDA does "see" IPMI and can actually display IPMI logs, but there is no way to select the fan sensors for OSD or in-app display.  Using the latest Beta after the stable did not work.  v7.60.7311   Any fixes?  Thanks.

In AIDA64 please press Ctrl+D --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

[beas62]

On 3/16/2025 at 3:08 AM, Fiery said:

In AIDA64 please press Ctrl+D --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

Thanks, Fiery.  Sensor dump attached.

isasensordump.txt

[beas62]

On 3/16/2025 at 3:08 AM, Fiery said:

In AIDA64 please press Ctrl+D --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

 

isasensordump.txt

[Fiery]

On 3/26/2025 at 2:50 AM, beas62 said:

 

isasensordump.txt 20.12 kB · 0 downloads

Thank you!  That seems to be a motherboard that should be already 100% supported by the hardware monitoring module of AIDA64.  Please check the content of the Computer / Sensor page of AIDA64.  If you cannot see the sensor readings for your motherboard listed properly there, then please post a screenshot (or full copy-paste) of the Computer / Sensor page to let us check it out.

[beas62]

8 hours ago, Fiery said:

Thank you!  That seems to be a motherboard that should be already 100% supported by the hardware monitoring module of AIDA64.  Please check the content of the Computer / Sensor page of AIDA64.  If you cannot see the sensor readings for your motherboard listed properly there, then please post a screenshot (or full copy-paste) of the Computer / Sensor page to let us check it out.

Thanks for checking.  As you can see from the sensor page, the only fans detected are the GPU fans.  All fans are set to PWM and report accurately in IPMI.  I'm sure there's a setting somewhere I'm missing, but haven't found it yet.. 

[Fiery]

On 3/28/2025 at 12:40 AM, beas62 said:

Thanks for checking.  As you can see from the sensor page, the only fans detected are the GPU fans.  All fans are set to PWM and report accurately in IPMI.  I'm sure there's a setting somewhere I'm missing, but haven't found it yet..  

Thank you!  It's very strange, your motherboard doesn't work at all like typical Asus desktop motherboards.  Please send us one more dump: in AIDA64 please press Ctrl+D --> Sensor Debug --> Embedded Controller Dump.

Thanks,
Fiery

[beas62]

8 hours ago, Fiery said:

Thank you!  It's very strange, your motherboard doesn't work at all like typical Asus desktop motherboards.  Please send us one more dump: in AIDA64 please press Ctrl+D --> Sensor Debug --> Embedded Controller Dump.

Thanks,
Fiery

It is not typical in my experience either.  It's designed as a hybrid workstation/server board so seems a lot is offloaded to BMC and IPMI.  Not much to the ecdump, but here it is.

ecdump.txt