fixed: GPU2 Utilization/clock missing (2x AMD Navi)

[EvWvE]

Hello,
 

I'm using Aida64 with old G15 display to monitor my hardware, but I adding a second Gpu to my Rig , and some sensors is missing.

2 Gpu are active in same time (multi monitors connected to each GPU)
- Multi gpu support enabled
- Wake up Gpu : enable
- ULPS disable in Registry. (or enable change nothing)

Gpu1 clock / utilization / Memory clock Are present, but No sensors available  for GPU2 Utilization / clock

GPU-Z and Windows Taskmgr can have this information, but can't use it for my G15 display

I try to reset Aida64 (deleting Aida64.ini)
Using last beta (7.99.7852beta)
Fresh Windows 11 install
Using last AMD drivers available (28.8.1)

I don't kown if this is a bug, or Aida64 limitation ? or something other ?

Thanks

[Fiery]

8 minutes ago, EvWvE said:

Hello,
 

I'm using Aida64 with old G15 display to monitor my hardware, but I adding a second Gpu to my Rig , and some sensors is missing.

2 Gpu are active in same time (multi monitors connected to each GPU)
- Multi gpu support enabled
- Wake up Gpu : enable
- ULPS disable in Registry. (or enable change nothing)

Gpu1 clock / utilization / Memory clock Are present, but No sensors available  for GPU2 Utilization / clock

GPU-Z and Windows Taskmgr can have this information, but can't use it for my G15 display

I try to reset Aida64 (deleting Aida64.ini)
Using last beta (7.99.7852beta)
Fresh Windows 11 install
Using last AMD drivers available (28.8.1)

I don't kown if this is a bug, or Aida64 limitation ? or something other ?

Thanks

In AIDA64 please press Ctrl+D --> Video Debug --> ATI GPU Registers. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

If possible, please use the latest AIDA64 beta build (v7.99.7852).

Thanks,
Fiery

[EvWvE]

ATI GPU Registers

atigpureg.txt

[EvWvE]

I don't know if it can be usefull informations:

Aida detect only the card in the first slot, 1st slot used by Windows to boot.

In my case,  after machine boot I can close AIDA64, desactivate my 9060Xt with windows peripherals manager to keep only the 7900xtx active, and relaunch AIDA64, 

Result is worse, no more Clock or Gpu utilization available.

My bios is configured to use "PCIE-2 Initial Display" (even with that windows boot using GFX in First PCIE)

[Fiery]

On 8/31/2025 at 4:32 PM, EvWvE said:

ATI GPU Registers

atigpureg.txt 7.45 kB · 4 downloads

Thank you!  Please upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

[EvWvE]

Hello, update done.

Almost Fixed !  
- The issue of gpu2 clock/utilization is gone
- But with this new beta, GPU2 : power / temperature / cooling / Voltage have disapeared :D


I join new debug ATIgpureg, and screenshot of missing sensors.

PS: with old build, all sensors aren't present too. (you can see them in first screenshot, Posted Wednesday at 01:01 PM)

atigpureg-7.99.7859Beta.txt

[EvWvE]

On 9/7/2025 at 2:56 PM, Fiery said:

Thank you!  Please upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

Hello,

Did you have some informations to share for next beta build release date ?

Thanks

[EvWvE]

Hello,

I tested last Beta (v8.00.8004) and unfortunately, no change about missing sensors For GPU2

Thanks


 

atigpureg.txt

Edited September 24 by EvWvE
add logs file

[Fiery]

On 9/24/2025 at 11:57 AM, EvWvE said:

Hello,

I tested last Beta (v8.00.8004) and unfortunately, no change about missing sensors For GPU2

Thanks

Please check the latest AIDA64 beta build available at:

https://www.aida64.com/downloads/latesta64xebeta

Thank you for your patience about this matter!

[EvWvE]

Good job ! 
I have now  the GPU1 & GPU2 in same time ^^

[Fiery]

5 minutes ago, EvWvE said:

Good job ! 
I have now  the GPU1 & GPU2 in same time ^^

Great news, thank you for your feedback!