Petr Soucek Posted November 22, 2018 Share Posted November 22, 2018 I don't know if this the right place to discuss AIDA64 Linux Extension but I have not found better. At first, here: https://www.aida64.com/linux-extension-aida64 is written "The software can be easily deployed in a corporate environment by following the instructions in the Setup Guide, which is downloadable from our website" - but I was not able to find this Setup Guide on your website. I tried to use AIDA Linux extension on my Ubuntu linux machine and some information is missing. I don't know if it is correct or not, but this information is available. I ran sudo ./aida64_x64 command locally. CSV file: Summary,,Display,525,Monitor,Unknown get-edid | parse-edid output: Section "Monitor" Identifier "20WGX2" ModelName "20WGX2" VendorName "NEC" # Monitor Manufactured week 48 of 2007 # EDID version 1.3 # Digital Display DisplaySize 430 270 Gamma 2.20 Option "DPMS" "true" Horizsync 31-83 VertRefresh 56-75 # Maximum pixel clock is 170MHz #Not giving standard mode: 1280x720, 60Hz #Not giving standard mode: 1280x960, 60Hz #Not giving standard mode: 1280x1024, 60Hz #Not giving standard mode: 1440x900, 60Hz #Not giving standard mode: 1400x1050, 60Hz #Not giving standard mode: 1680x1050, 60Hz #Not giving standard mode: 1152x864, 75Hz Modeline "Mode 0" 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync EndSection CSV file: names truncated: Summary,,Storage,528,Disk Drive,WDC WD60EZRZ-00G Summary,,Storage,528,Disk Drive,MK001920GWCFB Summary,,Storage,528,Disk Drive,Crucial_CT512M55 hdparm -I (just part of the report) Model Number: WDC WD60EZRZ-00GZ5B1 Serial Number: WD-WX61DA6PZHNR Firmware Revision: 80.00A80 Model Number: MK001920GWCFB Serial Number: S3BPNY0J308921 Firmware Revision: HPG0 Model Number: Crucial_CT512M550SSD1 Serial Number: 14140C10B4DB Firmware Revision: MU02 CSV file: all DMI "Unknown" sudo dmidecode shows: # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 2.6 present. 109 structures occupying 4808 bytes. Table at 0x000F21D0. BIOS Information Vendor: Dell Inc. Version: A15 Release Date: 05/08/2017 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 10240 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 4.6 System Information Manufacturer: Dell Inc. Product Name: Precision T3600 Version: 01 Serial Number: 8C8RJZ1 UUID: 4C4C4544-0043-3810-8052-B8C04F4A5A31 Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Base Board Information Manufacturer: Dell Inc. Product Name: 08HPGT Version: A02 Serial Number: /8C8RJZ1/CN7220039701AL/ Asset Tag: Not Specified Features: Board is a hosting board Board is replaceable Location In Chassis: Not Specified Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 64 GB Error Information Handle: Not Provided Number Of Devices: 4 Memory Device Array Handle: 0x002E Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: Not Specified Type: DDR3 Type Detail: Registered (Buffered) Speed: 1600 MT/s Manufacturer: Samsung-00CE Serial Number: 1345F804 Asset Tag: 031327 Part Number: M393B1G70BH0-YK0 Rank: 1 CSV file: CPU,,CPU Manufacturer,0,Product Information,Unknown lscpu output: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 45 Model name: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz Stepping: 7 CPU MHz: 1197.019 CPU max MHz: 3800,0000 CPU min MHz: 1200,0000 BogoMIPS: 7183.09 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 10240K NUMA node0 CPU(s): 0-7 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe s yscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monit or ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts flush_l1d Apparently much more information could be added to the report. Petr Quote Link to comment Share on other sites More sharing options...
GPeti07 Posted November 22, 2018 Share Posted November 22, 2018 Hi Petr, Please check our UK site, where you can find the documentations: https://www.aida64.co.uk/linux-extension-aida64 I think these will help solve your problem, but if not, please let me know. Best, Peter Quote Link to comment Share on other sites More sharing options...
Petr Soucek Posted November 23, 2018 Author Share Posted November 23, 2018 Thank you, but it did not help. Some problems are caused by incorrect output of lshw command. Quote Link to comment Share on other sites More sharing options...
GPeti07 Posted November 23, 2018 Share Posted November 23, 2018 Please, send me the CSV report file and the debug log:-dDebug mode. Saves lshw debug information into an XML file in the current (or specified) directory. It is recommended to use it together with “-l”. Thank you! Quote Link to comment Share on other sites More sharing options...
Petr Soucek Posted November 24, 2018 Author Share Posted November 24, 2018 Please see the attached file. D152.7z Quote Link to comment Share on other sites More sharing options...
GPeti07 Posted November 28, 2018 Share Posted November 28, 2018 I checked the attached files, these are ok. The report creation is success without errors. If you load the CSV file using Audit Manager function, you can see the results clearly. This Linux extension create a similar report as the "Summary" page in AIDA64. Quote Link to comment Share on other sites More sharing options...
Petr Soucek Posted November 29, 2018 Author Share Posted November 29, 2018 Yes, but with the errors mentioned in the first post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.