[Current consumption information for USB devices]

Hello,

Please add current consumption information for external USB devices

[Please add to memory benchmarks results additional column "Efficiency"]

Hello,

Please add to memory benchmarks results additional column "Efficiency"

Efficiency(%)=(BenchBandwidth/TheoreticalBandwidth)*100%

[Why are the voltage sensors not visible in the laptop?]

Hello,

Why are the voltage sensors (Memory and CPU) not visible in the laptop?

 

 

[Low Memory read result]

Hello,

Why Dual DDR3-1066 memory read result so low?

This is only 50% from theoretical bandwidth...

 

[Motherboard Physical Info is absent (Lenovo B560)]

Hello,

Why "Motherboard Physical Info" section is absent on notebook Lenovo B560?

[Suggestion: performance per GHz]

Hello,

Please add measurement of the CPU frequency during the benchmark.

And show the value Score/GHz.

[Tools - Network benchmark]

Hello,

Please add network benchmark (like Iperf) to Tools

[Info about memory modules on memory channels]

Hello,

please add information about the allocation of memory modules by memory channel.

to see which memory module is on which channel.

[Why did you remove benchmark for SHA1/SHA2?]

But why don't you like "hardware acceleration"?

Especially since this is not real hardware acceleration, but only extension to the x86 instruction set architecture.

[Why did you remove benchmark for SHA1/SHA2?]

Very strange explanation. Why then do you use AES-benchmark? He also uses acceleration.

[Suggestion: performance per watt]

Hello,

Please add measurement of the consumed power during the benchmark.

And show the value Scores/Watt.

[Why did you remove benchmark for SHA1/SHA2?]

But why did you do SHA3 instead of SHA2?

sha2 is used much more often than sha3.

also sha2 is hardware accelerated in CPU. sha3 NO.

[Virtual machine compatibility]

Hello,

Is the disk speed test (Tools - Disk Benchmark) compatible with Windows virtual machine (VMware ESXi)?

[Info about caches]

Hello,

Please add info about bus width and clock for each cache L1/L2/L3/L4, and info about type (exclusive, inclusive).

[Benchmark latest processors]

Hello,

Why you don't benchmark the latest Intel processors?

Your last tested processor is i7-8700K from Q4'17.

 

P.S. And why 16x Ryzen9 3950X has a significantly lower result than 8x Ryzen7 1800X in PhotoWorxx?

[Please add info about timers]

Hello,

Please add info about available timers and their clocks (RTC/ACPI/QPC/HPET)

[Why did you remove benchmark for SHA1/SHA2?]

>> As a hashing algorithm, SHA1 is obsolete.

SHA1, but not SHA2.

NIST does not currently plan to withdraw SHA2 or remove it from the revised Secure Hash Standard.

[Why did you remove benchmark for SHA1/SHA2?]

Hello,

why did you remove benchmark for SHA1/SHA2?

this benchmark could be hardware accelerated

https://en.wikipedia.org/wiki/Intel_SHA_extensions

[Monitor incorrect info]

DumpEDID shows not complete information?

What simple utilities can show full info?

[Monitor incorrect info]

I used DumpEDID, but i do not see "Maximum Pixel Clock" or "Video Bandwidth" info.

How do you get this information (170 MHz)?

 

D:\Distr\nirsoft\dumpedid>DumpEDID.exe -a
DumpEDID v1.07
Copyright (c) 2006 - 2018 Nir Sofer
Web site: http://www.nirsoft.net

*****************************************************************
Active                   : Yes
Registry Key             : DISPLAY\BNQ78DB\4&1a6469cc&1&UID52830976
Monitor Name             : BenQ GW2270
Serial Number            : A9J02231019
Manufacture Week         : 37 / 2018
ManufacturerID           : 53513 (0xD109)
ProductID                : 30939 (0x78DB)
Serial Number (Numeric)  : 21573 (0x00005445)
EDID Version             : 1.3
Display Gamma            : 2.20
Vertical Frequency       : 50 - 76 Hz
Horizontal Frequency     : 30 - 83 KHz
Maximum Image Size       : 48 X 27 cm (21.7 Inch)
Maximum Resolution       : 1920 X 1080
Support Standby Mode     : No
Support Suspend Mode     : No
Support Low-Power Mode   : Yes
Support Default GTF      : No
Digital                  : Yes

Supported Display Modes  :
     720 X  400  70 Hz
     640 X  480  60 Hz
     640 X  480  75 Hz
     800 X  600  60 Hz
     800 X  600  75 Hz
     832 X  624  75 Hz
    1024 X  768  60 Hz
    1024 X  768  75 Hz
    1280 X  720  60 Hz
    1280 X  800  60 Hz
    1280 X 1024  60 Hz
    1280 X 1024  75 Hz
    1600 X  900  60 Hz
    1680 X 1050  60 Hz
    1920 X 1080  60 Hz

*****************************************************************

D:\Distr\nirsoft\dumpedid>

[How to see the current drawn by the device connected to the usb port?]

Yes, that's what i'm talking about.

Why AIDA does not show this information?

[How to see the current drawn by the device connected to the usb port?]

But Windows can:

https://support.hp.com/doc-images/953/c01906076.jpg

[Monitor incorrect info]

Hello,

I have monitor BenQ GW2270HM

As you can see in datasheet, Video Bandwidth = 205 MHz

https://www.benq.eu/en-ee/support/downloads-faq/manuals/datasheet/monitor-datasheet-086.html

and now i'm using mode 1920*1080@70Hz

 

But, AIDA show incorrect info:

Maximum Pixel Clock 170 MHz

1920 x 1080 Pixel Clock: 148.50 MHz

 

[How to see the current drawn by the device connected to the usb port?]

Hello,

 

 How to see the current drawn by the device connected to the usb port?

 

I do not see this info in Devices\USB Devices:

 

[Please add realtime CPU frequency detection inside VM]

Maybe you can use counters from Performance Monitor:

VM Processor \ Effective VM Speed in MHz

VM Processor \ % Processor Time