MrX1980

Hi Team, I noticed, that at AIDA64 -> Motherboard -> SPD -> Memory Module Features -> Thermal Sensor has the value "Not Present", but at Computer -> Sensor -> Temperatures I see all four DIMM temperatures. So I think this value should be "Present/Available" or similar. Is it a bug? AIDA64 v7.00.6723 Beta ASRock X99M Extreme4 Motherboard ID 63-0100-000001-00101111-051215-Chipset$0AAAA000_BIOS DATE: 10/03/17 10:41:11 VER: 05.0000B Module Name 4x G Skill Trident Z F4-3200C14-8GTZ OS Version 10.0.22000.2538 (Win11 21H2 RTM) Regards, MrX1980 smbusdump_full.txt

Hello Fiery, it is working great. Thank you for the fast change.

I have enabled "Battery Charge Rate" (Aida64 -> System stability test -> Preferences -> Power) and tried to display the discharging rate with the graph, but because we cannot set negative values (Min. value >= 0), the results are not visible. We can only show/view values beginning with 0 watt. So it would be nice, if we can set negative values for an upcoming Aida64 release.

Hi, it is working now as expected. Thank you for the fast implementation / changes.

Hi Fiery, I have done some tests. I updated AIDA64 an run one liniear test run, copied the values to LibreOffice Calc. = working Then I started a second run with another block size, copied again to LibreOffice Calc = there is still the first copied value in the clipboard I closed Calc and AIDA64 and started both again. Now I run two linear test runs and copied the value to Calc = there are still the values of the first run in the clipboard So I think, if more than two runs was done, the copy function is not working.

Hi AIDA64 team, I would like to have: a) Read Test Suite - Possibility to save the results as CSV file and not only as PNG Read Test Suite - Possibility to select more than one block size, so we can run the tests in a "batch mode" (without to change the block size after every test run manually) Thanks Currently I use AIDA64 v5.70.3837 beta (Disk Benchmark v1.06.09)

+1 from me

Now supported with Version: 3.20.2651 (Nov 06, 2013) Storage / ATA / Automatic Partial to Slumber Transitions detection Storage / ATA / Device Initiated Interface Power Management detection Storage / ATA / DEVSLP detection Storage / ATA / Hardware Feature Control detection Storage / ATA / Host Initiated Interface Power Management detection Storage / ATA / HPA Security Extensions detection Storage / ATA / Hybrid Information Feature detection Storage / ATA / IDLE IMMEDIATE With UNLOAD FEATURE detection Storage / ATA / Link Power State Device Sleep detection Storage / ATA / NCQ Autosense detection Storage / ATA / NCQ Streaming detection Storage / ATA / Service Interrupt detection Storage / ATA / various ATA commands detection Storage / SMART / special support for OCZ Vector 150 SSDs ... Thanks

Hello I'm missing the WDDM driver version in Aida64 (v3.00.2594 Beta) that is visible with dxdiag.

Hello, LAV Filters ( http://code.google.com/p/lavfilters/ ) has a Intel Quick Sync detection. I hope it can help to add it to Aida64.

Hello I heard/read that Windows 8.1 64-bit needs the following CPU support: - CMPXCHG16b - LAHF/SAHF - PrefetchW (http://windows.microsoft.com/en-us/windows-8/preview-faq) CMPXCHG16b and LAHF/SAHF I can find in the Aida64 CPU Instructions set list, but not PrefetchW. Does it have another name or ist it missing ?

Thanks for your efforts!

Hello, I just found this technology called M-Disc. http://www.mdisc.com/what-is-mdisc/ http://www.mdisc.com/m-disc-ready-drive/ If possible, add it to the Storage -> Optical Drives -> Optical Drive Features Because I don't have such a drive, I cannot send you dumps with these values. I hope that someone can send you such dumps. Thanks

Hi, what about this ? serial-ata-ahci-tech-proposal-rev1_3_1.pdf page 9ff Offset 44h: PxDEVSLP – Port x Device Sleep bit = 1 Device Sleep Present (DSP): If set to „1", the platform supports Device Sleep on this port. If cleared to „0‟, the platform does not support Device Sleep on this port. Else can you try to contact james.a.boyd@intel.com ? My experience is not enough to ask the right questions :-)

Hello, I'm missing the value "DEVSLP" (device sleep) in Storage -> ATA -> ATA Device Features or SSD Features http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/serial-ata-ahci-tech-proposal-rev1_3_1.pdf http://www.sata-io.org/documents/SATA-DevSleep-and-RTD3-WP.pdf Should be visible like this (if possible): Device Sleep (DEVSLP) = Supported, Enabled Thanks

Hello Fiery, I see it is really poorly documented by khronus.org But attached is what I found out. I have created an Excel file with hyperlinks to the "khronus registry documentation", but sadly I cannot find all extensions (so not all hyperlinks will work). I'm not 100% sure with all values. It would be good if some peoples could prove this. Hopefully my Excel file will help you. Update: I asked at the khronos forum for help: http://www.khronos.org/message_boards/viewtopic.php?f=4&t=5555 OpenGL_ES_Extensions.zip

Hi, please add OpenGL ES to "OpenGL Compliancy". Now: OpenGL Compliancy: OpenGL 1.1 Yes (100%) OpenGL 1.2 Yes (100%) OpenGL 1.3 Yes (100%) OpenGL 1.4 Yes (100%) OpenGL 1.5 Yes (100%) OpenGL 2.0 Yes (100%) OpenGL 2.1 Yes (100%) OpenGL 3.0 Yes (100%) OpenGL 3.1 Yes (100%) OpenGL 3.2 Yes (100%) OpenGL 3.3 Yes (100%) OpenGL 4.0 Yes (100%) OpenGL 4.1 Yes (100%) OpenGL 4.2 Yes (100%) OpenGL 4.3 Yes (100%) Future: OpenGL Compliancy: OpenGL 1.1 Yes (100%) OpenGL 1.2 Yes (100%) OpenGL 1.3 Yes (100%) OpenGL 1.4 Yes (100%) OpenGL 1.5 Yes (100%) OpenGL 2.0 Yes (100%) OpenGL 2.1 Yes (100%) OpenGL 3.0 Yes (100%) OpenGL 3.1 Yes (100%) OpenGL 3.2 Yes (100%) OpenGL 3.3 Yes (100%) OpenGL 4.0 Yes (100%) OpenGL 4.1 Yes (100%) OpenGL 4.2 Yes (100%) OpenGL 4.3 Yes (100%) OpenGL ES 1.0 Yes (100%) OpenGL ES 1.1 Yes (100%) OpenGL ES 2.0 Yes (100%) OpenGL ES 3.0 Yes (100%) Thanks

Hello Fiery, sorry for the late reply. 1) Because of problems with HDMI->DVI I have switched to VGA->VGA (secondary). I don't know if this was the reason that Aida64 now starts always on the primary monitor or something was changed between v1.80.x and v2.20.x 2) I use always the custom/advanced installation and "Perform a clean installation". After that I don't change a setting. At the moment I have v295.73 installed. I have tried it with a new aida64.ini too. But starting on the primary monitor is now better than on the secondary. So it is only a low priority bug for me.

Aida64 v2.20.1817 Beta "Remember main window position" still not working (maximized and normal window). It starts always on the primary display. "Remember main window size" seems to work. \\.\DISPLAY1 Yes (0,0) (1600,1200) \\.\DISPLAY2 No (1600,0) (3280,1050) Windows 7 x64 Ultimate SP1

Thanks, it is working great. nVidia GT 240 & 295.51 = 712 / 270 AMD/ATI 4670 AGP & 12.1 = 712 / 219

For example to see if a driver update "increase" the number of supported extensions or to compare graphic cards.

Thank you for the fast changes ! A "extension counter" would be nice:

Thanks ! What about to add *_ANGLE_* extensions too? http://code.google.com/p/angleproject/wiki/ExtensionSupport

Hello please post here all missing OpenGL (ES) Extensions. Aida64 2.00.1782 Display -> OpenGL -> OpenGL Extensions a) GL_EXT_occlusion_query_boolean http://www.khronos.o...ery_boolean.txt GL_EXT_read_format_bgra http://www.khronos.o...format_bgra.txt c) GL_EXT_robustness http://www.khronos.o..._robustness.txt ... to be continued.

Display -> OpenGL is working now on both PC's. Thanks Display -> GPGPU -> Stream: RV730 is empty because of installation errors of the AMD AGP Hotfix (APP) drivers. The installation log show only "installation failed" but no exact error message. As always AMD are not able to give working drivers and the installer/uninstaller is still a shame.