MrX1980

Thanks With my MainPC and the GT240 it works but not with my TestPC and HD4670 AGP (Catalyst 11.8). Display -> OpenGL = Empty Display -> GPGPU -> Stream: RV730 = Empty I have done some dumps. If you need more just ask. Aida64_HD4670AGP_dumps.zip

Aida64 1.80.1498 Preferences -> Layout: Remember main window position = enabled Remember main window size = enabled steps to reproduce: a) start Aida64 maximize the window on primary monitor (DVI) c) close Aida64 now: on next start it will open maximized on the secondary monitor (HDMI->DVI) should be: on next start it should open maximized on the primary monitor (DVI) With minimized or normal window it works right. Aida64_1.80.1498_GT240_dual-monitor.zip

I think I have found some OpenGL detection errors (marked in bold). nVidia GT240 with v280.26 (OpenGL 3.3/4.1) OpenGL 3.3 Yes (100%) OpenGL 4.0 No (38%) OpenGL 4.1 No (-114%) # No (0%) OpenGL 4.2 Yes (100%) # No (0%) nVidia GT240 with v280.28 (OpenGL 3.3/4.2) OpenGL 3.3 Yes (100%) OpenGL 4.0 No (38%) OpenGL 4.1 No (0%) OpenGL 4.2 Yes (100%) # Yes (50%) New in OpenGL 4.2: GL_ARB_texture_compression_bptc = Not Supported GL_ARB_compressed_texture_pixel_storage = Supported GL_ARB_shader_atomic_counters = Not Supported GL_ARB_texture_storage = Supported Aida64_1.80.1498_GT240_OpenGL.zip

Hello a) I tried to send a result with the "Submit Report To FinalWire" function but I always get "Connecting..." and nothing happens. If this window is open I cannot switch to it with ALT+TAB. Aida64 is not then in the "Tab-List". c) If I abort it and try again I have to type in my name and email address again. This should be remembered. Thanks Aida64 v1.80.1498 beta

Thanks this helps !

Hello I see no HDD SMART / Sensor values with AID64 1.80.1450 with my ASUS M4N82 Deluxe mainboard. I have export some reports an dumps for investigating it. If you need more just ask :-) Thanks AIDA64 Reports.zip

The Sensor Panel does not work for me. As you can see Aida64 is running an I have other active Gadgeds but get always "Aida64 is not running or the Sidebar support is disabled". Update: Fixed: I have to enable File -> Preferences -> Vista Sidebar -> "Enable Vista Sidebar Support" But If I enable "Show SensorPanel" I only get a blue field without values.

Hello here are some suggestions to the disk benchmark module: Read Test Suite: a) no fixed window size please possibility to save the results as .csv / .txt c) it is not possible to save all results in one .png if the scroll bar appears (with many results) ... to be continued Thanks MrX1980

Ok thanks for your explanation!

Ok I will report it to ASUS.

Hello Aida64 1.50.1200 Computer -> DMI -> System Slots - 3x PCI-E x16 (instead of two) - PCIEX16_1 is in use not PCI_2 - wrong order of the slots Is this fixable (because of DMI data) ? wrong: [ System Slots / PCIEX1_1 ] System Slot Properties: Slot Designation PCIEX1_1 Type PCI-E x1 Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCIEX16_1 ] System Slot Properties: Slot Designation PCIEX16_1 Type PCI-E x1 Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCI_1 ] System Slot Properties: Slot Designation PCI_1 Type PCI Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCI_2 ] System Slot Properties: Slot Designation PCI_2 Type PCI Usage In Use Data Bus Width 32-bit Length Short [ System Slots / PCIEX16_2 ] System Slot Properties: Slot Designation PCIEX16_2 Type PCI-E x1 Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCIEX1_2 ] System Slot Properties: Slot Designation PCIEX1_2 Type PCI-E x1 Usage Empty Data Bus Width 32-bit Length Short right: [ System Slots / PCIEX16_1 ] System Slot Properties: Slot Designation PCIEX16_1 Type PCI-E x16 Usage In Use Data Bus Width 32-bit Length Short [ System Slots / PCI_1 ] System Slot Properties: Slot Designation PCI_1 Type PCI Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCIEX16_2 ] System Slot Properties: Slot Designation PCIEX16_2 Type PCI-E x16 Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCI_2 ] System Slot Properties: Slot Designation PCI_2 Type PCI Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCIEX16_3 ] System Slot Properties: Slot Designation PCIEX16_3 Type PCI-E x16 Usage Empty Data Bus Width 32-bit Length Short [ System Slots / PCIEX1_1 ] System Slot Properties: Slot Designation PCIEX1_1 Type PCI-E x1 Usage Empty Data Bus Width 32-bit Length Short Aida64_1200_System_Slots.zip

Hello Aida64 1.50.1200 Windows 7 Network -> Windows Network -> Network Adapter Properties: There is only one MTU value. It should be divided into two values. Example: MTU IPv4 = 1492 MTU IPv6 = 1500 Thanks PS: If you like you can move this topic to "Brainstorming"

Aida64 1.50.1200 Storage IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Why does it show IDE (ATA) instead of SATA II ? (in the Bios I set it to = AHCI ) Aida64_1200_atadump.txt Aida64_1200_physdrvdump.txt Aida64_1200_diskctrldump.txt

Hi here are the requested files. Aida64_1176_atadump.txt Aida64_1176_physdrvdump.txt Aida64_1176_diskctrldump.txt

Hello Aida64 1176 show wrong disk drive values: Computer -> Summery wrong: Storage: IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device (596 GB, USB) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device right: Storage: IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII) Storage -> ATA wrong: [ WDC WD6400AARS-00Y5B1 ...] Buffer Unknown right: [ WDC WD6400AARS-00Y5B1 ...] Buffer 64 MB Aida64_1176_Computer_Summery.txt Aida64_1176_Sorage_ATA.txt

Hi this seams to work now. Thanks I will continue to monitor it. MrX1980

1) Are you running any Asus monitoring software next to AIDA64? E.g. Asus PC Probe, Asus TurboV? No tools 2) Do you have the option "SMBus access through ACPI (Asus motherboards)" in AIDA64 / main menu / File / Preferences / Stability checked or unchecked? unchecked Update: With "ckecked" the delay between the switches is longer, but the problem still exist.

"Chassis #1" is visible/unvisible every few seconds. I can make a video if you want. sensors2.txt

Here is the requested file/information. I think we should move this then as a new thread ? Can you do this? thx sensors.txt

Sadly it seams not to be fixed for me. "Chassis #1" is the problem isasensordump.txt smbusdump_full.txt

for me too Motherboard Name = Asus M4N82 Deluxe (Bios 2301) Sensor Type = ITE IT8720F (ISA 290h) Aida64 1.20.1165 beta

Hello after the complete setup I got an error message (see screenshot) at first Aida64 start. Win7 Ultimate x64 german