philhu

Yes! That fixed it! I can see the missing h110i-gtx fan again~

Bummer, didn't think that far It DOES have a right/left button. Would those work?

I have a samsung lcd

Cool....glad I helped? Anyway, good luck on it! I'll be watching!!!

Anything else needed or can you figure out why the H110iGT fan speed sensor went away?

No, I'd like you to add screen or soft byttons to allow navigation to other pages. I could place a button on the screen like I place a sensor display

Sorry about that...here is the usbdump usbdump1.txt

I was running aida64 and lost a sensor in the corsair screen again. The sensor just disappeared. I have a h110i-gtx and added a commander mini with 4 temp sensors, light panel AIDA64 found all at first, but then lost the Fan speed on the h110i-gtx. Pump speed and pump temp are there Tried rebooting, still missing. SIV shows the missing sensor. I've enclosed their discovery too I enclose a corsairlink dump corsairlinkdump.txt

Hey Is there a way to not cycle through pages of the LCD screens? Maybe always set a page to stay on UNLESS a person pushes a button that is put on the pages to goto another page. So example: User builds LCD page 1,2,3 He wants it to stay on Page 1 Each page would have a 'goto' button to another page, ie, Page one would have a 2 and 3 button Page 2 has a Pg 1 and 3 button and Page 3 has a Pg 1 and pg 2 button. Possible?

Does aida64 support the Commander Mini? I plugged one in with a light strip and 4 temp sensors. Aida64 doesn't see them (SIV does, so I know they are connected correctly)

I found the same file in my garmin package and copied it to the aida64 directory, restarted aida64, and both siv and aida64 are working and showing the speeds Thanks! Now I am not enslaved by the Corsair software!

Ok, I have attached the usb dump for you for the system that cannot see the corsair stuff I see in the usb dump, it shows the Corsair, so I also enclosed the fan/pump section of variables for sensors for my lcd screen, which is missing these fields Can aida64 and siv live running side-by-side? I have gotten siv to run the pump/fan, so no need for CL4 or and corsair software - yay! phil-usbdump.txt

Ok, I am confused Let me give you the string of events.... My win10 system has aida64, latest extreme beta (today), runs fine, runs lcd screen fine I also had Cosairlink 3 installed, not running Aida64 shows 110i-GTX pump and fan speeds, etc until I run Corsair link3, then Aida64 cannot find those 2 fields. That is how it has been so thats ok So today: I uninstall Corsairlink3, then Reboot Install Corsair link4/new driver/service Reboot CL4 does not see any devices either Aida64 cannot see the pump and fans either, even if CL4 is not running and driver not running I uninstall CL4/driver reboot Aida64 still cannot see the Corsair H110i GTX unit But interesting thing is SIV sees them just fine I have attached the screen shot from SIV Cooling 'status' screen Any ideas? I am out of them!!! edit--What I am doing now is running both SIV and AIDA64. SIV seems to see the Corsair stuff and I am letting it handle the fan speed stuff based upon water temps......With some experimentation, my system idle water temp is 32C and when doing video encodes (hex cpu at almost 100%0, the water gets to 47C So I am setting my temps/pwm for the fans in SIV accordingly and it works fine. So I will use SIV in place of CL4 to control fans My only problem is aida64 will no longer see the CL pump and fan, even with CL software/driver removed and I rebooted. Do you know why?

Ok, so, since I will be replacing the Corsair stuff with another cooler, what do you recommend that doesn't interfere with your software and you support?

no its not your fault, I do not mean that I have the asetek 110i unit I know the Coolit unit is better, and I have one sitting around Can that one run with aida64 and cl software at same time? Would it work any better with that unit? My problerm is my fans come on higher when I do alot of video encodes, so I start CL so the fans speed up and aida64 loses the pump and fan speeds. No big deal, but wanted to report

so if I close down CL software, how do I control the fans? SIV? Can it run at same time as AIDA64?

Ok, I can see these under sensors and USB devices, but is there a Corsair page somewhere? Can AIDA64 change fan speeds? I have a h110i gtx unit and it shows the pump/fan speeds, but do not see a way to control them. If I turn on Corsair link 3.x, the pump/fan speed in aida64 show 0 on my sensor, on usb page, go away! Also, set asetek fan speed to 50% 50%. Why are there two percents there and it did not seem to change anything. Did I miss something?

ok Did a bit more checking. Almost right I started AIDA64 I added str1 and dw1, added to page display, worked fine Added a str2 and str3 value. Aida64 sees them immediately, but if I use them in a field, the field goes blank, test/box/value, the whole item So, I exit AIDA64 and restart it, still sees the str2 and str3, but the fields defined using them stay blank. If I delete the fields and re-add, they stay and work fine. So ADDING a new str or dw field after aida64 is up has a problem. If you define all the items in the registry, before starting AIDA64, it works fine. Then changes are picked up immediately from then on.

That sounds good. I will try it over the next few days Thanks! EDIT This all works perfectly, immediate display updates, strings can be in boxes and graphic guagues etc work with the dw values I have my program generate the batch file that sets the reg values and then calls it, with the batch file created on a ram disk. It all works perfectly So AIDA64 now not only monitors my hardware but monitors my production runs by checking jobs and pointing out problems!!!

Yep, Reg based seems ok Can we have a list of 10 strings and 10 REG_SZ for numerics?

Sold, exactly what I need So would you take every 'variable', ie, named registry entry under ImportValues and return those? So if I added: String "AIDAProcessingStatus" with a value of "4-8 jobs in use" and.. REG_SZ "AIDAProcessJobsInUse" with a value of 4 The first would obviously be a string to display The second is a number which could then be used in fields with bars, etc something like that?

well, my system ha s aramdisk, 1m, which is where i write my files to be executed from my monitoring pgm. I hate constant disk writes too. What my system does is write a batch file that is executed after monitor stufff is run internally. The environmental setx would have been cool. I would be fine with reg values, but I do not know of any way to write them from a batch file/cmd line except maybe writing a x.reg file and importing it

ok, got it So what is the best 5.25" front panel display to put in the pc? What do you recommend? The nmedia one just slid in and connected to usb2 header. Anything good out there as easy to put in a system as nmedia?

This device does bitmap or text processing. You have your set to 20x2 text mode....Kind of limiting Is there any way to get a bitmap written to it? The monitor software they supply, although very dated, does do bitmap writes to it, giving you font/size/picture ability

Another alternative is a jump file. You define an exact filename on a system, like in your application folder called, ImportValues.txt You check the modified date/time to see if it has been changed, if it has you parse it as: valuename="This is the value" value2name="This is another" etc, etc