beada
-
Posts
86 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Posts posted by beada
-
-
2 hours ago, Mergatroid said:
Is there somewhere where all the templates are accessible without having to look through hundreds of comments? Like a download area?
I love the fact that people are willing to share, but it's taking hours to find anything. Most of the templates shown in the forum don't have an attachment to download.
So far I have not found anything that explains how to make these templates. I find vague references to other software and that's about it.
Honestly, for $100 Canadian, I expected AIDA64 to have a decent editor in it with paint functions for drawing but I find nothing at all.
I have no issue making my own template but I don't see how other people have managed to accomplish it with such poor instructions.
Here is instruction for how to arrange the layout of sensor panel-->
https://www.aida64.com/products/features/external-display-support
-
5 hours ago, LODE said:
Hey!
Anyone have template to share for this beadapanel 1280x480 ?
thanks!
https://forums.aida64.com/topic/667-share-your-sensorpanel/page/383/#comment-50230
- 1
-
-
13 hours ago, Vegetable beeF said:
Hello,
Bought this panel about 8 months ago and did a fresh install of windows and now I cannot get this to work. The web link with instructions no longer work. Do you have a new link?
Thanks
Here is link for instructions:
-
8 hours ago, Fancied0317 said:
Is there a tutorial available on disabling the screensaver / changing screen settings? I'd like to have it only function when aida64 is running.
yes we have a tools 'beadatools' for configuration of BeadaPanel.
https://1drv.ms/u/s!ArGfiTxjUGUl_SJ6Kq2Ta46Tkxlj?e=EQBdgh
you can edit parameters in animation.ini file for brightness under screensaving.
-
On 1/6/2023 at 9:57 AM, GK3 said:
Looks like I was on firmware 701, rolling back to 700 did the trick. Thank you so much!
Actually that was not a rollback. Both of firmware 700 and 701 can support Windows graphics drivers. What you have done is to re-install the graphics driver on your Windows 11.
-
13 hours ago, GK3 said:
Hello, was hoping for some troubleshooting help. Had the BeadaPanel working no problem (loved it, thank you) until what I assume was a Windows update for Windows11 that borked it. Now it is no longer recognized by aida64 (aida64 Error:USB device 4E58-1001 not found) or BeadaTools. It is visible in device manager as "other devices" but has no driver. Unsure what next steps to take so any help would be greatly appreciated.
Had you ever installed Windows Graphics Driver for the panel before? If the answer is yes, then you can following this link to re-install the graphics driver under Windows 11.
-
13 hours ago, Michael O said:
Excellent, look fwd to the fw.
The Internet condition from China mainland goes to North America deteriorated extremly in past week. It took us approximately 16 hours to upload a 1GB image file to MS onedrive space. Weird, the Internet condition recovered to normal as soon as our uploading finished.
Here is the link for firmware-->https://1drv.ms/u/s!ArGfiTxjUGUlgP4toRQBQqoI0hVaBA?e=85Pu45
The firmware update procedures are almostly identical with a regular BeadaPanel but you need to choose a dedicated rootfs image file--snapshot-beadapanel-midori-202210192.pmf
and here is user guide-->https://elinux.org/INNOSTICK6-DEBIAN#Connect_via_USB
Midori is loaded when BeadaPanel powers up, but you can switch to Firefox if you want. Remember use a VNC viewer to connect to BeadaPanel when you want to make configurations to it-->https://elinux.org/INNOSTICK6-DEBIAN#VNC_Remote_Login
-
On 10/12/2022 at 3:39 PM, Michael O said:
Yes it can. My Linux distro has virtualisation so I can pass through any USB device to virtual machines (windows, linux etc).
The firmware is ready to go now and I will let you know as soon as it is uploaded. This can be used in any scenarios when customer want open a webpage on BeadaPanel.
-
On 10/2/2022 at 3:11 AM, littlewitewilly said:
Anyone have an idea as to why my 5" monitor will only work and display my sensor panel when it is plugged into a regular USB? Whenever I plug my monitor into a motherboard USB header, it doesnt get recognized and will not diplay the sensor panel. I've tried looking all over the internet for solutions and come up empty
Asrock H670M-ITX/AX LGA 1700 Intel H670 mb...i5 12400 cpu
Which USB screen you are using? Had you tried other USB device like USB mouse to connect to your MB USB header?
-
21 minutes ago, Michael O said:
Yes it can. My Linux distro has virtualisation so I can pass through any USB device to virtual machines (windows, linux etc).
That is fine. Wait a few days until we can line up firmware/instructions.
- 1
-
13 hours ago, Michael O said:
No, linux (slackware). Screen size 5"
Can you confirm that your slackware linux can support USB RNDIS Ethernet device? If the answer is yes, then all the proposals will work.
PS, that linux host should have a USB 2.0 port first.
-
6 minutes ago, Michael O said:
Where can I get the firmware/instructions?
What is your screen size? Is your web server on a Windows host?
-
2 hours ago, Michael O said:
Yes, please advise how I can show web pages in Beadapanel, thank you.
You will need to load a different firmware on BeadaPanel. And then Windows will recognize it as a USB RNDIS card as soon as it pluged in. Config this RNDIS card with a static IP address on Windows and then BeadaPanel will automatically load web pages from the host(server).
That is all of the logical precedures.
- 1
-
Yes you can. Actually that was the way BeadaPanel working with AIDA64 before 2019--We call it remote sensor. In early 2019 we worked with FW to develop a new USB communication protocol and then we dropped remote sensor. We can discuss how to use internal web browser in BeadaPanel if you like.
-
On 8/2/2022 at 4:51 AM, criskoe said:
Funny I just checked this thread yesterday cause I remembered these were talked about and was wondering how it was going. And you read my mind and posted today. Lol. Wow they look great! Black one for me! Will they be on your normal eBay store?
Here are links for new items on ebay.
Or you can buy from BeadaPanel primary store-->https://www.cjcsh.com
-
16 hours ago, Michael O said:
Nice. Where did you get the case from? Also the 6.8" screen is not visible on ebay.co.uk - please can you fix.
We design the case by ourself. And here is link for ebay.co.uk.
- 2
-
-
-
18 minutes ago, criskoe said:
That’s just a prototype right? The Retail finished black will look much cleaner and nice right??
Final surface process that we chosed are brushed finishing(wire drawing) + anodic oxidation. So the pictures are very close to the final product since all dimensions & processes are determined. We chose brushed finishing to avoid reflection, artifact and finger prints, etc.
-
7 hours ago, criskoe said:
Funny I just checked this thread yesterday cause I remembered these were talked about and was wondering how it was going. And you read my mind and posted today. Lol. Wow they look great! Black one for me! Will they be on your normal eBay store?
Yes we will definately have these cases selling in our ebay shop. In past 2 months we spent a lot of time to try many variants for case constructions. And this make us a little behind of schedule. Fortunately we are arriving now.
Here is a picture for 5" CNC aluminum case.
-
-
-
1 hour ago, criskoe said:
This is fantastic news. Really glad to see some official case options coming from Beada. It’s awesome
The mock up looks great. Few questions. Any reason you guys are going aluminum instead of high quality plastic?? Reason I ask is aluminum will definitely cost more. A cheaper plastic option might also be a good idea to have too. I personally will 100% order the aluminum version as I don’t mind spending extra money on quality but I know there is a lot of people that might prefer a budget option.
For the aluminum case. What colors are you guys planning? Black? Silver? Brushed? What type of coating?
Man I’m excited. Any chance you plan on making cases for the 6.8 inch wide screen you guys have? That one could really use a case like you mocked up there. Or any of your other screens? If so they will be a instant buy for me!
Where can I keep an eye out for these cases to buy???? And when will you be taking orders? I want to get in ASAP.
Thanks for the feedback.
Yes a plastic case will be in lowest unit price but there are one time mold design cost and MOQ demands for plastic injection(5k-10k/batch). So we decide to take CNC aluminum case as a start. Of course we will consider back plastic solution when sales increase tremendously
For the surface process, we will choose anodic oxidation with a matt surface(black and silver color).
We plan to have an aluminum case for our 6.8" suite either, a similar scenario with the 5" suite. I will update you here as soon as further progress( e.g. engineering samples, purchase links, 6.8" solutions) outcome in future.
Best sensor panel that works with just USB.
in Hardware monitoring
Posted
BeadaPanel has it's own USB Graphics Driver for Windows. Here is a link for detailed procedures of installation-->