djg

That was it - I tried a different MB connector and now it all shows. Thanks!

There are two connectors on the PSU. I have their included USB cable connected to the PSU mini-USB connector and a MB USB connector. Maybe one of those is defective. I'll check. I had some weird bad stuff that happened while trying a Thermaltake PSU which is on its way back to Newegg :(. Thanks!

Thanks Fiery, here you go: corsairlinkdump.txt usbpsudump.txt

Hi Fiery, Is there any chance of getting amperage used by volts? All I can see currently is the voltages n my Corsair HX850i. Cheers!.

Makes sense - I started looking at the PSU connector side image and using that to check for the USB connection, seems to do the trick :). Thank you!

Thank you, Fiery, the manufacturer name was all I was expecting, not the specific PSUs for all the reasons you mentioned :). Do these "smart" PSUs require a USB or such cable to enable monitoring by AIDA64? I can't see any "smart" labeling or feature specification in any of the PSUs from those manufacturers except that Corsair provides its own monitor through USB. Thanks again!

I'm shopping for a new PS and would like it to be supported by AIDA64. Is it possible to get a list of PS manufacturers supported? Thanks!

Thanks, Fiery!

Hi Fiery, I'm having a critical problem with the latest betas and my Areca controllers, both ARC1882 and ARC1883. I had sudden problems with the 1882 - the disks no longer showed in the sensors, but more important, Windows 10 hibernation would take forever then when restarted WIndows would show a critical hibernation failure. Restarting would also take forever. I also started getting random freezes and restarts. Removing the disk controller would solve the problem (I don't boot from it). I thought the controller was showing its age so I got an 1883 - same problem! Different PCI-E slot, same. After several exercises restoring older OS images I almost by accident realized that updating AIDA would create the problem! Beta 4522 doesn't have the problem. 4538 & 4531 do. Truly weird. Asus Strix X99 Gaming, BIOS 1801, WIndows 10 1709 up-to-date.

Pretty weird! I normally get ~7000 KBytes speed in general but your site I would get ~2000 KBytes. Today's download started as usual for your site but after ~20% it's now slowed down to 80 KBytes which is what I've been getting for a couple of weeks. Weird!

Hi Fiery, For several days I've been experiencing incredibly slow download speeds , only on this site - other sites / downloads work as expected. Any ideas? OC stable Asus Strix X99 BIOS 1701, WIndows 10 1703 up-to-date, Verizon FIOS connectivity.

Thanks for checking Fiery!

Oops! Thought it might be common like the Corsair Link. It's an RM850i.

Hi Fiery, Is it possible to get the Corsair PSU's OCP state, whether it's in single or multi-rail mode? Thanks!

Works like a charm Fiery! Thank you!

Sure thing! Thanks for all the work!

Hi Fiery, No news on this? Thanks!

No, that's correct. The Areca controller has 5 3TB HDs as a RAID 6 disk with 2 volumes defined in Windows. The four 850 EVO SSDs are connected to the Intel on-board SATA as RAID 10 with 1 volume in Windows, and the two OCZ Vertex also to the Intel SATA as RAID 0 with 3 volumes in Windows.

Here you go. Thanks! smartdump.txt raiddump.txt diskctrldump.txt

Hi Fiery, Yes, RAID member enumeration and RAID SMART Support are both checked. Also Low-level SMART. Currently running BIOS 1401 on the Strix MB.

Hi Fiery, No, only one of two Vertex SSDs shows, none of the four Samsung 850 EVOs do. ATA shows the same Vertex and the RAID set in an Areca PCI card, and Physical Drives shows the Areca RAID set and the two RAID volumes in the Intel on-board controller, one from two Vertex SSDs and the one from the four Samsung EVOs. Thanks!

Hi Fiery, For some time now my 850 EVO temps are not being reported - could be a Asus Strix X99 Gaming MB firmware issue? Thanks! DJ

OK Fiery, will do!

In case this helps, my running processes ...

Nope - I don't like Windows-based OC software, and Aida64 is my only monitoring app, as I'm aware of the possible conflicts. Unless Windows is doing something?. Changes in my Windows environment seem to be sort of linked to this weird behavior. But currently i get all four dimm temps. Just the kind of headache you don't need