hechao Posted March 21, 2023 Share Posted March 21, 2023 Hello AIDA64 official, I have found a serious issue while using the software recently. I use my smartphone to access AIDA64's "Enable RemoteSensor LCD" service via Wi-Fi. This function worked normally in versions before 6.7, but it doesn't work in the recent updates. Whenever I try to turn on the "Enable RemoteSensor LCD" option, AIDA64 crashes, and this issue is not occasional, it happens every time, which makes AIDA64 unusable. Quote Link to comment Share on other sites More sharing options...
Solution hechao Posted March 21, 2023 Author Solution Share Posted March 21, 2023 Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 26, 2023 Share Posted March 26, 2023 On 3/21/2023 at 6:37 AM, hechao said: On 3/21/2023 at 4:48 AM, hechao said: Hello AIDA64 official, I have found a serious issue while using the software recently. I use my smartphone to access AIDA64's "Enable RemoteSensor LCD" service via Wi-Fi. This function worked normally in versions before 6.7, but it doesn't work in the recent updates. Whenever I try to turn on the "Enable RemoteSensor LCD" option, AIDA64 crashes, and this issue is not occasional, it happens every time, which makes AIDA64 unusable. I'm afraid we cannot reproduce the issue on our test systems. Does it happen with a clean installation of AIDA64 as well? Quote Link to comment Share on other sites More sharing options...
hechao Posted March 28, 2023 Author Share Posted March 28, 2023 I have tested on no less than 5 computers, and without exception, the same problem occurred. If I open the RemoteSensor LCD option and try to connect to the AIDA64 page via Wi-Fi, AIDA64 will crash. Sometimes it will exit automatically after an hour without any error message, and sometimes an error message like the one in the image will appear. Quote Link to comment Share on other sites More sharing options...
hechao Posted March 28, 2023 Author Share Posted March 28, 2023 I seem to have identified the problem, but I don't know how to solve it. I use an app on my smartphone that allows me to ping the AIDA64 RemoteSensor LCD port by pinging 192.168.1.X:80. If I can successfully ping the port, I can then open the AIDA64 RemoteSensor LCD service on my phone's web browser. This behavior was allowed in versions prior to 6.70, but in versions between 6.70 and 6.88, AIDA64 always encounters errors once I try to ping the server port in this way. I hope to receive your suggestions on how to resolve this issue. Quote Link to comment Share on other sites More sharing options...
Thunderbolt00 Posted April 6, 2023 Share Posted April 6, 2023 I just downloaded the latest AIDA64 trial to see if it can work as a replacement for different software, started setting up RemoteSensor LCD and ran into the same issue - I can read all sensors and modify the layout just fine, but the moment I try connecting to it (even by just opening localhost:port in my browser) the program crashes with no error message. Sometimes it will connect and keep working for a while, until I make any changes to the layout, which will make the browser refresh and crash AIDA Edit: I believe I've fixed it, or at least mitigated the issue. While trying to fix slow sensor reads I've done a Sensor Profiling Dump, which showed that my Corsair HX1500i PSU takes over 12 seconds to update sometimes, which I think was causing some sort of timeout and crash. Disabling HXi support under Stability seems to have fixed the connection issue for the most part Quote Link to comment Share on other sites More sharing options...
N173M43R Posted April 9, 2023 Share Posted April 9, 2023 On 4/6/2023 at 3:37 AM, Thunderbolt00 said: I just downloaded the latest AIDA64 trial to see if it can work as a replacement for different software, started setting up RemoteSensor LCD and ran into the same issue - I can read all sensors and modify the layout just fine, but the moment I try connecting to it (even by just opening localhost:port in my browser) the program crashes with no error message. Sometimes it will connect and keep working for a while, until I make any changes to the layout, which will make the browser refresh and crash AIDA Edit: I believe I've fixed it, or at least mitigated the issue. While trying to fix slow sensor reads I've done a Sensor Profiling Dump, which showed that my Corsair HX1500i PSU takes over 12 seconds to update sometimes, which I think was causing some sort of timeout and crash. Disabling HXi support under Stability seems to have fixed the connection issue for the most part Here to confirm that I have the issue as well. I tried disabling all stability settings that were not measuring things I was monitoring but still get random crashes. Older versions (oct 2022 I believe) do not have this issue, but then have the issue of incorrect windows cpu readings, an issue that also took them months to solve. In order to sign up to post this I found out that the site has broken sign up on chrome for at least 2 months. only, y'know, by far the worlds most popular browser. This coupled with the fact that they cant 'find' my license leads me to believe the project is dying somewhere behind the scenes. I don't believe I'll be buying another license for them to lose. Quote Link to comment Share on other sites More sharing options...
ultracopa Posted April 16, 2023 Share Posted April 16, 2023 same issue here aida64 crash after open browser and connect to localhost Quote Link to comment Share on other sites More sharing options...
QWYZkun Posted April 16, 2023 Share Posted April 16, 2023 i have the same issue Quote Link to comment Share on other sites More sharing options...
spectra9 Posted July 1, 2023 Share Posted July 1, 2023 Any solution to this yet? Tried the beta, the panel will load, but it doesn't last long, at some point aida64 will crash with access violation error or null pointer error Quote Link to comment Share on other sites More sharing options...
Sergeykurmelev Posted October 5 Share Posted October 5 I have the same problem. When using RSLCD Viewer Aida64 crashes. Sometimes it works stably with games. But in Windows11 it often crashes. Sensor panel works without problems, but RLCD crashes. Quote Link to comment Share on other sites More sharing options...
Sergeykurmelev Posted October 5 Share Posted October 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.