Jump to content

Share your Sensorpanels


Mice007

Recommended Posts

On 5/15/2021 at 8:07 AM, ThatManOnTheMoon said:

Material Design Big Bars 1200x1920

Different colorways and the required fonts are included.

I'll be releasing a simplified light-themed version later.

Note 1: Nvidia 30XX sensor data (usage, TDP, VRAM temps, etc.) are supported in the new beta release. So adjust accordingly if you're using it. In the sensor panel VRAM temps are set to some random temps at the moment. The % value is set to TDP% as GPU usage% wasn't supported in the current standard release. After installing the beta, I swapped the 2nd GPU fan for TDP watts.

Note 2: The min and max values are just labels, so adjust accordingly or remove per preference.

jFZU7nr.jpg

 

gqmqlkI.png

 

V4Fc2H1.png

 

Additional Pictures:

 

Material Design Big Bars 1200x1920.zip 964.64 kB · 1,268 downloads

I would love to resize these to 1080px1920. Could anyone offer me any advice on how to do this or if it is even possible? any help would be so greatly appreciated! thank you!

Link to comment
Share on other sites

5 hours ago, Stevecorwing25 said:

can somebody help me out  trying to resize but cant seem to do it. just want the sensor panel to fit the side of the screen , not the top of it since i am using wallpaper engine. i have a 515 X1920 Screen portriat.

977400454_customsensorpanel.sensorpanel 2.53 MB · 2 downloads

Usually it's no simple matter to resize a sensorpanel.  In effect you will have to recreate the original sensorpanel for the design specs of the display panel you want to use.  ie recreate and/or resize each element of the original sensorpanel into a new container sensorpanel.    I don't think there is a way to just copy elements from one sensorpanel to another.   And unfortunately you can't actually resize a gauge,  just the component parts, which then can be rebuilt into a different sized gauge.   

Unless the original sensorpanel is very simple, you are talking at least a couple hours work if not more.   It's definitely a learning experience.  If the size of the text labels/gauges/graphs etc are okay and you just need to move them to a different location in the sensorpanel try this.  Hide all elements in the sensorpanel manager.  Then one by one unhide and change the x/y position of each element for the location you want or that it will fit.  It's tedious, but you will learn a whole lot.

  • Like 2
Link to comment
Share on other sites

パネルだけ変更しました。後でレイアウトを縮小/拡大するために最善を尽くしてください。がまた、Gage の一括 変更アドレスを添付します。

一度に複数の画像のサイズを変更します!(iloveimg.com)

515/1920ピクセル

 

 

センサーパネルフレーム2RGB.png

背景センサーパネル.jpg

センサーパネルフレーム2RGB.zip

977400454_customsensorpanel.センサーパネル

  • Haha 1
Link to comment
Share on other sites

12 minutes ago, Awol said:

Isnt that just a remake of of a themely panel?

themely – themely

It's a remake of my panel in 2021... 

NZXT Theme

 

themely's stuff is similar yes, in terms of modern clean design. I don't see a panel that looks like mine though. Gauges & layouts are completely different. Very nice stuff!

  • Like 1
Link to comment
Share on other sites

44 minutes ago, philipfreire said:

It's a remake of my panel in 2021... 

NZXT Theme

 

themely's stuff is similar yes, in terms of modern clean design. I don't see a panel that looks like mine though. Gauges & layouts are completely different. Very nice stuff!

I stand corrected, i do apologise. May adjust and tinker with it to fit my waveshare 11.9inch panel. I did the same with one of the themely designs. If i do the same with yours would you have issue with me sharing it if as long as you are credited as the original author ? There aren't many 1480*320 panel files on here.

 

Screenshot 2023-01-24 153855.png

  • Like 1
Link to comment
Share on other sites

42 minutes ago, Awol said:

I stand corrected, i do apologise. May adjust and tinker with it to fit my waveshare 11.9inch panel. I did the same with one of the themely designs. If i do the same with yours would you have issue with me sharing it if as long as you are credited as the original author ? There aren't many 1480*320 panel files on here.

 

Screenshot 2023-01-24 153855.png

That's perfectly fine!

In the future I may get a wide screen panel and retro fit it. 

Link to comment
Share on other sites

On 2/19/2021 at 11:33 PM, Tahsin said:

Ok so i've finaly finished the Digital Sensor panel and you can have it 

this file have 4  files one 800x600 one 800x480 one Font file you install in Windows fonts folder

and the background file if you want to resize it to your own monitor

Cheers digi800x600.png

 

https://1fichier.com/?yr4nnqfhb5axoq03srhz

 

Updated now it looks more realistic 

digital-Grey.png

just resize the background  to fit your resolution and change it with the preview one 

https://1fichier.com/?4znf66ozjhfvzpjee79m

 

hi, could you please re-upload these panels? thanks!

Link to comment
Share on other sites

22 hours ago, Dropcheck said:

Usually it's no simple matter to resize a sensorpanel.  In effect you will have to recreate the original sensorpanel for the design specs of the display panel you want to use.  ie recreate and/or resize each element of the original sensorpanel into a new container sensorpanel.    I don't think there is a way to just copy elements from one sensorpanel to another.   And unfortunately you can't actually resize a gauge,  just the component parts, which then can be rebuilt into a different sized gauge.   

Unless the original sensorpanel is very simple, you are talking at least a couple hours work if not more.   It's definitely a learning experience.  If the size of the text labels/gauges/graphs etc are okay and you just need to move them to a different location in the sensorpanel try this.  Hide all elements in the sensorpanel manager.  Then one by one unhide and change the x/y position of each element for the location you want or that it will fit.  It's tedious, but you will learn a whole lot.

Hey Drop, Is there a guide somewhere on how to do this? I want to try and move around some of the elements on themanonthemoons material design big bars sensor panel. it is only 120p too big for me (I need 1080x1920 and his is 1200x1920).I might be able to make it work, but not sure if it would be possible. Do you know where there may be a guide for this? or Even combining 2 sensor panels possible? because I did find someone that has already modified it to fit in 1080x1920. But it doesnt have VRM temperatures like the original one does. I would really like to have this information as NVIDIA RTX 3000 founders editions tend to run really hot VRM temperatures. I would like to know when I should go in and repaste my GPU

Link to comment
Share on other sites

13 hours ago, psyphoid said:

Hey Drop, Is there a guide somewhere on how to do this? I want to try and move around some of the elements on themanonthemoons material design big bars sensor panel. it is only 120p too big for me (I need 1080x1920 and his is 1200x1920).I might be able to make it work, but not sure if it would be possible. Do you know where there may be a guide for this? or Even combining 2 sensor panels possible? because I did find someone that has already modified it to fit in 1080x1920. But it doesnt have VRM temperatures like the original one does. I would really like to have this information as NVIDIA RTX 3000 founders editions tend to run really hot VRM temperatures. I would like to know when I should go in and repaste my GPU

What I would do first is go to C:/Program Files(x86)/FinalWire/AIDA64 Extreme/SensorPanel in File Explorer.  Delete all the files in that folder, but NOT the folder itself.  Then load up the sensor panel you want to change.  What that does is de-compact the graphics contained in the sensorpanel file.  Now make a folder somewhere on your desktop and copy these files to it.  Using Photoshop or Paint or some other graphics program, you should be able to resize the building block images for the gauges and possibly the other graphic images used now. 

Do a Youtube search for creating AIDA64 sensorpanels.  There's several, but you may have to wade through some duds first.  Even older ones will give you a feel for the process though.   With the original sensorpanel loaded, right click on it to bring up the context menu, select sensorpanel manager.  Highlight an (each -NOT) item and then click on the modify button.  That will bring up the edit window.   It contains all the pertinent settings and location in the panel for that item.   You'll need that info to recreate the gauges/textboxs etc.  I wouldn't make any changes to the original sensorpanel, only on a copy. 

 

Edited by Dropcheck
incorrect wording in directions
Link to comment
Share on other sites

On 9/24/2022 at 10:33 PM, DavyDee said:

Thank you so much @Knetjester for this piece, and especially for sharing! Below is my WIP to adapt this to 1920x480 and my custom loop design. Still need to work to live up any close to the great use of real estate on the display. But hey, everyone starts somewhere. So thanks again, Davy

my-build.JPG

Davy 0.7 based on Orac Red.jpg

As a follow up to my post last year, wondering what you guys think of my Xmas project to embed this panel into - yes, literally into - my desk.

Let me know what you think.

 

 

IMG_9875.JPG

IMG_9876.JPG

  • Like 11
Link to comment
Share on other sites

On 1/22/2023 at 10:44 AM, jobedeyo said:

I did some more work on the panel and added some metallic details to the gauges which are removable if not wanted. I added gauges for pretty much everything that I want to see, storage, fans, RAM.. Please let me know what you think.

OrangeRings.PNG

OrangeRings.sensorpanel 2.18 MB · 56 downloads

PLEASE CAN YOU DO 1920X480. TKS

Link to comment
Share on other sites

それは単なる広告であり、面白くありません。 私はクールな1920 * 480パネルの新しいタイプを探しています。 誰か共有してください できる範囲で共有してもよろしければ、満足のいくように修正してフィードバックをあげるので、わがままです! デザインが苦手なので、人のもので勉強するのが好き

宣伝ばかりで面白くない。新しいタイプでクールな1920*480パネル探してます。誰か共有願います。私のできる範囲で、共有してよいなら 自己満足に改変してフィードバックで、我がままですかね!デザインが下手なので、人の物で勉強しながら楽しんでます

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...