Gnusmas Posted April 19 Share Posted April 19 Hey Im building a PC, i have all the parts but the GPU, the PC is up and running because my CPU is the i9 13900K that have an iGPU so i could start the machine and install my softwares, dedicated GPU will come later when i'll have the money. Today my sensor panel arrived and i tested it a bit, the cip on the controller board gets very hot, not too happy about it but i have some small aluminium heat sinks and i will ad one to the microcip, the screen and the controller are like the one in the second last attached picture. I want to mount the panel exactly how it seats now but i dont have any ideas how to fix it there to be stable at the edge, any tips would be welcomed, also pictures if you can spare the time to make some! My idea for the mounting of the screen is to attach somehow an L shaped bracket to the back of the screen and then the other part i could screw down to the grill of the bottom of the case, the bracket i think about its like in the last attached picture. I also need to buy a HDMI cable that is thinner and less rigid cause the HDMI cable that i got with the display its too rigid. Everything is work in progress! Quote Link to comment Share on other sites More sharing options...
rinaldop Posted April 20 Share Posted April 20 My display is external but I have seen people use double sided tape. Quote Link to comment Share on other sites More sharing options...
Loyd Posted April 28 Share Posted April 28 get the red 3m double sided tape. it is used to hold car trim in place . will hold a lot better than carpet tape. find it in auto parts stores this link is to amazon https://www.amazon.com/Double-16-5FT-mounting-Strong-Office/dp/B0CPX945Y2/ref=sr_1_6?crid=3SMDUJ3I42PGC&dib=eyJ2IjoiMSJ9.0A1WLTj06dpQBy27yLiTAUXfW6zHMwloFBktL3c36yWl7an-8w8HRvhC3xsA9PHPP00uK9MfIPIcT6pGGnznOWX22HtYerCbclaV14kRWzQceHE63N-dALv1M7CjGbVDcRjOaXXIZOYeInCEfcmZz-SZOUE0lfIm2zcNtadfXZ11amQnVVeBx_hhFb6cqRXKCrx7PRWVIJjJ6wU3WX7DUByv15rU81U1p9u29t3F17dj_pp0Rmqmg4bEiIyMzEv4uXtwmBEvMiPUt4Ck2px1vSiRaETAhhx46OGUzGKpUYs.dem_VQhwxaOk6Eh4_UlIkkgDIyWkOUCfC6tLIy58HCY&dib_tag=se&keywords=3m%2Bdouble%2Bsided%2Btape&qid=1714339909&sprefix=3m%2Bdou%2Caps%2C144&sr=8-6&th=1#:~:text=to zoom in-,3M Double Sided Tape Heavy Duty 16.5FT%2CDouble Sided mounting Tape for Walls%2C3M vhb Strong Double Sided Tape Heavy Duty for Car%2C ED Strip Light%2C Home/Office Decor,-Brand%3A tapify Quote Link to comment Share on other sites More sharing options...
Badger Posted May 6 Share Posted May 6 I was lucky to get 14" panel which perfectly fits my Corsair 7000. Don't judge the image and current setup - I am still reworking the panel layout as it is now 3840x1100 and waiting for right cables to move panel to the edge of the frame. But I need nothing to engineer - it just fits the case. I was thinking to use flat magnets, but no need, so far. Quote Link to comment Share on other sites More sharing options...
Gnusmas Posted May 8 Author Share Posted May 8 Thanks for the tips guys, i didnt get my GPU yet so i didnt tried to mount it, i will try to find an L shaped bracket so that i can move the screen a bit forward if needed, if not ill try the double sided tape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.