New LCD device support: Turing (Turzx)

[DracoCW]

7 minutes ago, Fiery said:

Thank you, we'll get one too.

If it helps, I have attached a picture of the package the screen came in.

[Fiery]

3 minutes ago, DracoCW said:

If it helps, I have attached a picture of the package the screen came in.

Thank you!  It's quite interesting that the package is similar to the original Turzx 8.8-inch screen package, but the device itself has a different firmware -- and perhaps a different hardware too.

[AKINLASINN]

3,5 inç panelim.

 

[n0130dykn0ws]

Anytime I reboot, sleep, hibernate or disconnect the WOWNOVA 5" from Amazon the display freezes/distorts the panels. It works fine if I exit and launch AIDA64 again. I have not used the included SD card, installed any software or firmware from Turzx. Currently using the USB-C connection for testing but plan to use the 9 pin on a new build.

AIDA64 Build: 7.60.7317 Beta // Windows 11

It feels like it has some kind of USB initializing problem. I'm not sure if there are any settings in AIDA64 or device manager that would help.

Has anyone experienced this issue and also is the SD card needed at all?

Thanks!

[Amr0d]

On 3/25/2025 at 10:33 PM, Fiery said:

Please upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

It works like a charm 😄 Thank you very much. This is amazing now!

 

//edit

I got my display from the same AliExpress seller as @DracoCW btw. It has the same packaging. Not sure why mine works and his does not.

Edited 15 hours ago by Amr0d

[Fiery]

19 hours ago, n0130dykn0ws said:

Anytime I reboot, sleep, hibernate or disconnect the WOWNOVA 5" from Amazon the display freezes/distorts the panels. It works fine if I exit and launch AIDA64 again. I have not used the included SD card, installed any software or firmware from Turzx. Currently using the USB-C connection for testing but plan to use the 9 pin on a new build.

AIDA64 Build: 7.60.7317 Beta // Windows 11

It feels like it has some kind of USB initializing problem. I'm not sure if there are any settings in AIDA64 or device manager that would help.

Has anyone experienced this issue and also is the SD card needed at all?

Thanks!

We've tested it with our Turzx 5-inch display, and it worked fine with both sleep and disconnect/connect.  In AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

[n0130dykn0ws]

3 hours ago, Fiery said:

We've tested it with our Turzx 5-inch display, and it worked fine with both sleep and disconnect/connect.  In AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

I have confirmed now that the issue only occurs when I have rotation enabled in LCD options.

usbdump.txt