Loyd Posted June 30 Posted June 30 it is a 7.84 Inch Mini Monitor HD IPS 1280x400 Secondary Screen Stretched Bar LCD Display with Casing for Laptop Computer Speed Temperature Windows Aida64 CPU GPU Monitoring. it uses HDMI input. if connected as a second adia64 monitor you have to use remote sensor LCD support which is why you cannot use custom dials and such. Maybe some day it will be possible to connect more than one adia HDMI display. Quote
Fiery Posted June 30 Author Posted June 30 2 minutes ago, Loyd said: it is a 7.84 Inch Mini Monitor HD IPS 1280x400 Secondary Screen Stretched Bar LCD Display with Casing for Laptop Computer Speed Temperature Windows Aida64 CPU GPU Monitoring. it uses HDMI input. if connected as a second adia64 monitor you have to use remote sensor LCD support which is why you cannot use custom dials and such. Maybe some day it will be possible to connect more than one adia HDMI display. If it's a HDMI-connected monitor, then you should be able to extend the Windows desktop to it and use the SensorPanel facility with it. Quote
Loyd Posted June 30 Posted June 30 1 minute ago, Fiery said: If it's a HDMI-connected monitor, then you should be able to extend the Windows desktop to it and use the SensorPanel facility with it. not if you have another one already displayed. Can you open more than one panel? Quote
Fiery Posted June 30 Author Posted June 30 2 minutes ago, Loyd said: not if you have another one already displayed. Can you open more than one panel? Ah I see now. And no, multiple SensorPanels aren't supported. Quote
Loyd Posted June 30 Posted June 30 exactly, so in order to have 2 displays running adia64 one has to be remote sensor LCD, the other Native. That is until turzx. Now it seems we can run up to 4 maybe even more Oh what fun... Quote
BHSY Posted July 1 Posted July 1 (edited) On 2/7/2025 at 9:37 AM, BHSY said: Finally, I have the time to test the TURZX display. I tried it on my Turing 8.8-inch (1920x480 pixels), and it works. However, when I put Windows to sleep mode, the device woke up Windows immediately. The only way I can do now is to rely on the TURZX software to 'Exit the software and shut down the device'. Can the device be put to sleep and prevented from waking up Windows without relying on the TURZX software? Thanks! Hi @Fiery, I'm using the Gen 1 TURZX Turing smart screen, 1920x480, and I'm facing the same problem again. I haven't used it for a while until today, and just changed to a new cable, a USB Type-C to USB 9-pin cable, because either the old PH cable was defective or the PH port was faulty. The device connection was successful and displayed the sensor perfectly, but the device keeps waking up my system as soon as I put Windows to Sleep. Even using a USB Type-C to USB Type-C. Attached is the usbdump.txt file for your investigation. Thank you! AIDA64_usbdump.txt Edited Tuesday at 12:00 AM by BHSY Quote
BHSY Posted Tuesday at 01:49 AM Posted Tuesday at 01:49 AM On 7/1/2025 at 9:28 PM, BHSY said: Hi @Fiery, I'm using the Gen 1 TURZX Turing smart screen, 1920x480, and I'm facing the same problem again. I haven't used it for a while until today, and just changed to a new cable, a USB Type-C to USB 9-pin cable, because either the old PH cable was defective or the PH port was faulty. The device connection was successful and displayed the sensor perfectly, but the device keeps waking up my system as soon as I put Windows to Sleep. Even using a USB Type-C to USB Type-C. Attached is the usbdump.txt file for your investigation. Thank you! AIDA64_usbdump.txt 51.02 kB · 0 downloads Hi @Fiery, any updates on the 1st Gen TURZX issue? Quote
Fiery Posted Thursday at 01:03 PM Author Posted Thursday at 01:03 PM On 6/30/2025 at 10:03 PM, Loyd said: exactly, so in order to have 2 displays running adia64 one has to be remote sensor LCD, the other Native. That is until turzx. Now it seems we can run up to 4 maybe even more Oh what fun... Well, it actually was already possible with other kind of external (USB) LCD displays like BeadaPanel, Matrix Orbital, etc. Quote
Fiery Posted Thursday at 01:28 PM Author Posted Thursday at 01:28 PM On 7/8/2025 at 3:49 AM, BHSY said: Hi @Fiery, any updates on the 1st Gen TURZX issue? We've tested it but couldn't reproduce the issue about AIDA64 waking your system up from sleep mode 1 Quote
BHSY Posted Thursday at 02:04 PM Posted Thursday at 02:04 PM 29 minutes ago, Fiery said: We've tested it but couldn't reproduce the issue about AIDA64 waking your system up from sleep mode Thank you for the testing. I had placed an order for PH to 9-pin USB cable and let's see if the device will prevent my system from waking up from sleep mode. In the meantime, I'll exit/close AIDA64 program to shut down the device. I'll let you know once I recive the new PH cable and tested it. Thank you. Quote
Mezba Posted 7 hours ago Posted 7 hours ago i have a 3.5 inch AX206 LCD,does it support turing (Turzx).If yes please share me the whole installation process. Thank you in advance. Quote
Mezba Posted 7 hours ago Posted 7 hours ago i have a 3.5 inch AX206 LCD,does it support turing (Turzx).If yes please share me the whole installation process. Thank you in advance. @Fiery Quote
Fiery Posted 7 hours ago Author Posted 7 hours ago 13 minutes ago, Mezba said: i have a 3.5 inch AX206 LCD,does it support turing (Turzx).If yes please share me the whole installation process. Thank you in advance. @Fiery AX206 LCD is also supported but it's a different LCD module of AIDA64. You can configure your AX206 device in AIDA64 / Preferences / Hardware Monitoring / LCD / AX206. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.