Jump to content

Aida64 8.0 - RAM temperature reading gone


Recommended Posts

Posted

v. 7.65 was OK. After upgrading to v. 8.0 DIMM temperature gone. Nothing was changed in Windows 11 or HW, no updates, patches whatsoever...

RAM Team Group T-Force Delta RGB 32GB (2x16GB) DDR5 running @ 7000MHz 

@Fiery - what debug should I send to you?

Thanks!

Posted
1 hour ago, Elderdeekey said:

v. 7.65 was OK. After upgrading to v. 8.0 DIMM temperature gone. Nothing was changed in Windows 11 or HW, no updates, patches whatsoever...

RAM Team Group T-Force Delta RGB 32GB (2x16GB) DDR5 running @ 7000MHz 

@Fiery - what debug should I send to you?

Thanks!

In AIDA64 please press Ctrl+D --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

Posted

UPDATE:

from my understanding dump file is empty, no SMBus reading at all...

I've spent quite some time testing and I found the following:
- after 1st PC start there is no RAM temp reading in Aida64 v.8
- if I exit Aida64 v.8 and then restart it manually w/o rebooting PC RAM temperature appears just fine.

Something is blocking that SMBus reading on initial PC boot...

At the same token v. 7.6 doesn't have that problem... RAM temp is in place after 1st PC start.

Would be happy to provide any additional info if needed.

Thanks!

Posted
22 hours ago, Elderdeekey said:

UPDATE:

from my understanding dump file is empty, no SMBus reading at all...

I've spent quite some time testing and I found the following:
- after 1st PC start there is no RAM temp reading in Aida64 v.8
- if I exit Aida64 v.8 and then restart it manually w/o rebooting PC RAM temperature appears just fine.

Something is blocking that SMBus reading on initial PC boot...

At the same token v. 7.6 doesn't have that problem... RAM temp is in place after 1st PC start.

Would be happy to provide any additional info if needed.

Thanks!

Can you please check if you might have two copies of AIDA64 installed (or present) on your system?  Maybe at bootup a different instance (maybe even a different version) of AIDA64 is launched?

Posted

Checked. No other version of Aida64 present on my system.

When testing I move the entire Aida64 directory into zip file, delete that directory, create new one and unpack another version into there.

So it is still very strange - v.8 doesn't show RAM temperature after initial boot and requires exit and restart Aida64.exe file to restore RAM temp reading while v.7.65 works just fine...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...