Aida64 8.0 - RAM temperature reading gone

[Elderdeekey]

v. 7.65 was OK. After upgrading to v. 8.0 DIMM temperature gone. Nothing was changed in Windows 11 or HW, no updates, patches whatsoever...

RAM Team Group T-Force Delta RGB 32GB (2x16GB) DDR5 running @ 7000MHz 

@Fiery - what debug should I send to you?

Thanks!

[Fiery]

1 hour ago, Elderdeekey said:

v. 7.65 was OK. After upgrading to v. 8.0 DIMM temperature gone. Nothing was changed in Windows 11 or HW, no updates, patches whatsoever...

RAM Team Group T-Force Delta RGB 32GB (2x16GB) DDR5 running @ 7000MHz 

@Fiery - what debug should I send to you?

Thanks!

In AIDA64 please press Ctrl+D --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

[Elderdeekey]

Here we go and thanks for the fast reaction!

smbusdump_full.txt

[Elderdeekey]

UPDATE:

from my understanding dump file is empty, no SMBus reading at all...

I've spent quite some time testing and I found the following:
- after 1st PC start there is no RAM temp reading in Aida64 v.8
- if I exit Aida64 v.8 and then restart it manually w/o rebooting PC RAM temperature appears just fine.

Something is blocking that SMBus reading on initial PC boot...

At the same token v. 7.6 doesn't have that problem... RAM temp is in place after 1st PC start.

Would be happy to provide any additional info if needed.

Thanks!

[Fiery]

22 hours ago, Elderdeekey said:

UPDATE:

from my understanding dump file is empty, no SMBus reading at all...

I've spent quite some time testing and I found the following:
- after 1st PC start there is no RAM temp reading in Aida64 v.8
- if I exit Aida64 v.8 and then restart it manually w/o rebooting PC RAM temperature appears just fine.

Something is blocking that SMBus reading on initial PC boot...

At the same token v. 7.6 doesn't have that problem... RAM temp is in place after 1st PC start.

Would be happy to provide any additional info if needed.

Thanks!

Can you please check if you might have two copies of AIDA64 installed (or present) on your system?  Maybe at bootup a different instance (maybe even a different version) of AIDA64 is launched?

[Elderdeekey]

Checked. No other version of Aida64 present on my system.

When testing I move the entire Aida64 directory into zip file, delete that directory, create new one and unpack another version into there.

So it is still very strange - v.8 doesn't show RAM temperature after initial boot and requires exit and restart Aida64.exe file to restore RAM temp reading while v.7.65 works just fine...