Petr Soucek Posted November 11, 2016 Share Posted November 11, 2016 Hi Fiery, although ECC is detected: --------[ Chipset ]----------------------------------------------------------------------------------------------------- [ North Bridge: Intel Haswell-EP IMC ] North Bridge Properties: North Bridge Intel Haswell-EP IMC Intel Platform Grantley-EP Supported Memory Types DDR4-1333, DDR4-1600, DDR4-1866, DDR4-2133 SDRAM Maximum Memory Amount 384 GB Revision 00 Process Technology 22 nm VT-d Supported VT-x Supported VT-x3 Supported Trusted Execution Technology (TXT) Supported Trusted Execution Technology – Server Extensions (TXT-SX)Supported Extended APIC (x2APIC) Supported Memory Controller: Type Quad Channel (256-bit) Active Mode Quad Channel (256-bit) Memory Timings: CAS Latency (CL) 15T RAS To CAS Delay (tRCD) 15T RAS Precharge (tRP) 15T RAS Active Time (tRAS) 36T Row Refresh Cycle Time (tRFC) 278T Command Rate (CR) 1T CAS To CAS Delay (tCCD) Same Bank Group: 6T, Diff. Bank Group: 4T RAS To RAS Delay (tRRD) Same Bank Group: 6T, Diff. Bank Group: 4T Write Recovery Time (tWR) 16T Read To Read Delay (tRTR) Different Rank: 6T, Different DIMM: 6T Read To Write Delay (tRTW) Same Rank: 11T, Different Rank: 12T, Different DIMM: 12T Write To Read Delay (tWTR) Same Rank: 21T, Different Rank: 7T, Different DIMM: 7T, Same Bank Group: 8T, Diff. Bank Group: 3T Write To Write Delay (tWTW) Different Rank: 8T, Different DIMM: 8T Read To Precharge Delay (tRTP) 8T Four Activate Window Delay (tFAW) 23T Write CAS Latency (tWCL) 16T Write CAS To CAS Delay (tCCDW) Same Bank Group: 6T, Diff. Bank Group: 4T Additive Latency (tAL) 0T CKE Min. Pulse Width (tCKE) 6T Refresh Period (tREF) 8320T Burst Length (BL) 8 Error Correction: ECC Supported, Enabled ChipKill ECC Supported, Enabled RAID Supported, Disabled ECC Scrubbing Supported, Enabled Memory Slots: DRAM Slot #1 4 GB (DDR4-2133 Registered DDR4 SDRAM) DRAM Slot #2 4 GB (DDR4-2133 Registered DDR4 SDRAM) DRAM Slot #3 4 GB (DDR4-2133 Registered DDR4 SDRAM) DRAM Slot #4 4 GB (DDR4-2133 Registered DDR4 SDRAM) in the Summary tab it is missing: Motherboard: CPU Type QuadCore Intel Xeon E5-1620 v3, 3600 MHz (36 x 100) Motherboard Name Dell Precision Tower 5810 Motherboard Chipset Intel Wellsburg C610/X99, Intel Haswell-EP System Memory 32688 MB (DDR4-2133 Registered DDR4 SDRAM) I don't know what means the second North bridge: [ North Bridge: Intel Haswell-EP IMC ] North Bridge Properties: North Bridge Intel Haswell-EP IMC Intel Platform Grantley-EP Supported Memory Types DDR4-1333, DDR4-1600, DDR4-1866, DDR4-2133 SDRAM Maximum Memory Amount 384 GB Revision 00 Process Technology 22 nm VT-d Supported VT-x Supported VT-x3 Supported Trusted Execution Technology (TXT) Supported Trusted Execution Technology – Server Extensions (TXT-SX)Supported Extended APIC (x2APIC) Supported Memory Controller: Type Quad Channel (256-bit) Active Mode Single Channel (64-bit) Error Correction: ECC Supported, Disabled ChipKill ECC Supported, Disabled RAID Supported, Disabled ECC Scrubbing Supported, Disabled Best Regards, Petr Quote Link to comment Share on other sites More sharing options...
Fiery Posted November 11, 2016 Share Posted November 11, 2016 We will fix that issue in the next AIDA64 beta update The secondary IMC is because all Ivy Bridge-E/EP, Haswell-E/EP and Broadwell-E/EP processors include two memory controllers, but in many cases only one of them is utilized. Regards, Fiery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.