GPU Memory Speed Sensor (Radeon HD 5770)

[producer]

Contractors Report the 1.6 gallons-per-flush bathrooms don't work really well. Costlier 1.6 gpf toilets have significantly more issues than the less costly versions, and usage of wax rings along with other alterations can result in more problems. Tests reveal bathrooms need at least 2.4 g per flush to operate nicely. The more compact bathrooms may conserve water but finally have a negative influence on waste systems.https://facebook.com/Top-Best-Flushing-Toilet-Reviews-ToiletsZones-574292116276986/

IN MY JANUARY column, I talked about 1.6 gal.-per-flush water cabinets and their possible effect on waste methods (pg. 36). I asked for comments on how you believe 1.6 bathrooms are functioning. While I have asked for your answer earlier, I never anticipated the amount of telephone calls, faxes and letters I received about your adventures with 1.6 cabinets.

The Unfortunate part of all of the answers was that they had been generally negative. In reality, I did not get one phone call stating just how much water has been stored, but I did get 1 facsimile that mentioned water conserving. The water savings was approximately two cents each woman. For the region of the nation. The notice was on a paper article that surfaced how badly 1.6 gpf water cabinets worked. In reality, the post mentioned that a lot of individuals could possibly be on the lookout to get 3.5 gpf water cabinets on the black market.

I Also got some telephone calls regarding testing which has been conducted on commercial 1.6 gpf water cabinets. The evaluations suggested a decent flush normally uses 2.4 to 2.6 gal. Of water every flush.

One Of the interesting points was that the greater quality water cabinets have a tendency to have more difficulties than less costly best flushing toilets. This looks primarily because of the nearer manufacturing tolerances to the top quality water cabinets.

In Another remark on the usage of wax rings on 1.6 bathrooms, the reader took exception to using wax bands altogether. I'd stated in January that using a wax ring with no horn or collar appeared to assist performance by not limiting the link of the passageway in the link of the water closet into the closet flange.

The Reader has discovered employing any wax ring may lead to wax to limit the passageway if it's compressed into position. He advocated using a mechanical seal to stop this circumstance.

Regrettably, There's not any way to find out whether the passageway was constricted by wax without even taking away the toilet. Then you are back in exactly the exact same case of placing the water cupboard back using a wax ring. This is certainly something to think of when installing a bathroom.

Maintain The advice coming and I will attempt to keep you updated with all the findings once I could. I'd particularly like to hear from those of you that aren't experiencing difficulties. We can attempt to ascertain what you are doing right and you're not having any issues.

Stray voltages

Another Caller requested me about what impact stray voltages have on water heaters and their collapse. To be quite frank, I did not and still do not understand the answer to that query. In case you have any advice or could point me in the ideal direction, please inform me. I'd love to pass this advice on to you.

Plumbing code Difficulties

I Recently got some advice from the American Society of Plumbing Engineers about which pipes codes were in effect for different areas of the nation. I was amazed to learn that seven countries don't own a plumbing code in the condition level. Where rules are in effect, the regional authorities adopted a plumbing code for their specific place.

I Also found it intriguing the a variety of model codes were embraced by area of the country, nearly without exception. As an example, the Uniform Plumbing Code is embraced in 10 countries, mostly from the Western section of the nation. The Southeastern United States mostly uses the Normal Plumbing Code.http://toiletszones.com/how-much-water-is-used-when-you-flush-toilet/

There Is just another plumbing code thing with which you are able to aid me. Please contact me the Name, address, contact number, etc. ) your nation and/or significant city code Enforcement officer, and also which code is appropriate to your region.

[Fiery]

4 hours ago, producer said:

Hey everyone,

Simple problem.

AIDA64 reports the GPU's core speed but not the GPU's memory speed. I am using an ATI HD5770 discrete graphics card and the card changes memory speeds as it goes between 2D and 3D modes.

I am interested in monitoring the change in memory speeds. GPU-Z, MSI Afterburner, and Sapphire TRIXX can read the memory speed sensor so that should be a piece of cake for you guys.

Please let me know if you need any reports/logs.

Thanks,

Please right-click on the bottom status bar of AIDA64 main window --> Video Debug --> ATI GPU Registers. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

Thanks,
Fiery

[Ellen Warren]