Edgewise Posted December 3, 2011 Share Posted December 3, 2011 In the bios when I set the Dram Voltage to 2.2 volts, in aida64 under Motherboard/Bios/Bios Settings (ATK) it says DRAM voltage 2.850 V. As a double check I lowered the voltage to 2.1 volts and the reading in aida64 Motherboard/Bios/Bios Settings (ATK) then reported 2.600 V. Is this a bug with the software? Is my board setting the wrong voltage? Quote Link to comment Share on other sites More sharing options...
Fiery Posted December 11, 2011 Share Posted December 11, 2011 AIDA64 reads BIOS Settings (as listed on the Motherboard / BIOS page) using Asus ATK BIOS calls. Hence those values reflect the values Asus BIOS provides to Windows applications. In your case I'm afraid there's a BIOS bug that results in improper DRAM voltage calculation by the BIOS. It doesn't mean the BIOS uses the wrong DRAM voltage, so you don't have to worry about that. It's a minor glitch that only affects software that read out the BIOS Settings via Asus ATK BIOS calls. Regards, Fiery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.