Jump to content
AIDA64 Discussion Forum
P.J

Chipset temperature (Gigabyte B75M-D3V)

Recommended Posts

Please copy-paste the full content of the Computer / Sensor page into this topic.

Then right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Field Value
Sensor Properties
Sensor Type ITE IT8728F  (ISA A30h)
GPU Sensor Type Diode  (ATI-Diode)
Chassis Intrusion Detected No

Temperatures
Motherboard 29 °C  (84 °F)
CPU Package 38 °C  (100 °F)
CPU IA Cores 38 °C  (100 °F)
CPU GT Cores 38 °C  (100 °F)
CPU #1 / Core #1 37 °C  (99 °F)
CPU #1 / Core #2 37 °C  (99 °F)
Aux 35 °C  (95 °F)
GPU Diode 41 °C  (106 °F)
WDC WD2500AAKX-001CA0 34 °C  (93 °F)
WDC WD5000AAVS-00ZTB0 38 °C  (100 °F)
WDC WD5000BMVW-11AMCS2 30 °C  (86 °F)

Cooling Fans
CPU 1232 RPM
Chassis 1369 RPM
GPU 15%

Voltage Values
CPU Core 1.068 V
+3.3 V 3.663 V
+5 V 5.010 V
+12 V 12.954 V
GPU Core 1.050 V

Power Values
CPU Package 6.26 W
CPU IA Cores 1.65 W
CPU GT Cores 0.03 W

------[ AIDA64 v2.50.2056 Beta ]------
------[ Microsoft Windows 7 Ultimate 6.1.7601 Service Pack 1 (64-bit) ]------------[ Motherboard Info ]------
Motherboard ID	  : 63-0100-000001-00101111-122211-Chipset$B75M-D3V_BIOS DATE: 06/07/12 21:53:50 VER: 04.06.05
Motherboard Model   : Gigabyte GA-B75M-D3V
Motherboard Chipset : Intel Panther Point B75, Intel Sandy BridgeDMI MB Manufacturer : Gigabyte Technology Co., Ltd.
DMI MB Product	  : B75M-D3V
DMI MB Version	  : x.x
DMI MB Serial	   : To be filled by O.E.M.
DMI SYS Manufacturer: Gigabyte Technology Co., Ltd.
DMI SYS Product	 : To be filled by O.E.M.
DMI SYS Version	 : To be filled by O.E.M.
DMI SYS Serial	  : To be filled by O.E.M.
DMI BIOS Version	: F6
ITE 87xx Port		   = 2Eh
ITE 87xx HWMonitor Port = 0A30h
ITE 87xx Device ID	  = 8728h
ITE 87xx Version		= 01hWinbond SuperIO Port		   = 00h
Winbond SuperIO HWMonitor Port = 0000h
Winbond SuperIO Device ID	  = FFFFh
Fintek SuperIO Port		   = 00h
Fintek SuperIO HWMonitor Port = 0000h
Fintek SuperIO Device ID	  = 0000hLPC47 SuperIO HWMonitor Port = 0000h
LPC47 SuperIO Device ID	  = FFFFh
------[ LM78 ISA Sensor Device at 0A30 ]------0000  1B 00 00 00  FF EF 00 00  00 80 60 00  30 28 EA FF
0010  FE FE FF 75  C7 80 80 81  02 01 FF FF  FF FF FF FF
0020  59 A9 A8 A7  B9 50 80 8D  87 23 1D 7F  B9 03 0F 0F
0030  FF 00 FF 00  FF 00 FF 00  FF 00 FF 00  FF 00 FF 00
0040  7F 7F 3C 00  7F 7F 5F 40  AD 6A D4 00  FF FF FF FF
0050  FF A8 7F 7F  7F 40 00 5E  90 00 3D 12  65 00 00 00
0060  00 14 41 46  1C 03 00 FF  00 00 00 00  00 00 00 FF
0070  00 14 41 46  10 03 00 FF  FF FF FF FF  FF FF FF FF
0080  FF FF FF FF  FF FF FF FF  02 30 01 02  01 5B E0 CD
0090  FF 00 00 00  FF 00 00 00  10 97 00 00  40 BC C1 89
00A0  BF A1 A1 A1  A1 A1 A1 FF  FF FF FF FF  FF FF FF FF
00B0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00C0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00D0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00E0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00F0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
  0029  002A  002B
T:   35	29   127
T:   35	29   127
T:   35	29   127
T:   35	29   127
T:   35	29   127
T:   35	29   127
T:   35	28   127
T:   35	29   127
T:   35	28   127
T:   35	28   127Reg$20 CPU Core:  r =  89,  r*0.016 = 1.42
Reg$21  CPU Aux:  r = 169,  r*0.016 = 2.70
Reg$22   +3.3 V:  r = 168,  r*0.016 = 2.69
Reg$23	 +5 V:  r = 167,  r*0.016 = 2.67
Reg$24	+12 V:  r = 185,  r*0.016 = 2.96
Reg$25	-12 V:  r =  80,  r*0.016 = 1.28
Reg$26	 -5 V:  r = 128,  r*0.016 = 2.05
------[ ACPI Temperatures & Fans ]------_TZ_.THM0._TMP			 :
_TZ_.THM1._TMP			 :
_TZ_.THR0._TMP			 :
_TZ_.THR1._TMP			 :
_TZ_.TZ00._TMP			 : <TYPE>0</TYPE><LEN>4</LEN><DATA>3010</DATA>
_TZ_.TZ01._TMP			 : <TYPE>0</TYPE><LEN>4</LEN><DATA>3030</DATA>
_TZ_.RTMP				  :
_TZ_.RFAN				  :
_TZ_.RFAN(0)			   :
_TZ_.RFAN(1)			   :
_SB_.ATKD._HID			 :
_SB_.ATKD.TMPR			 :
_SB_.PCI0.LPC0.EC0_.CCTV   :
_SB_.PCI0.LPC0.EC0_.LRPM   :
_SB_.PCI0.LPC0.EC0_.HRPM   :
_SB_.PCI0.SBRG.EC0_.ECPU   :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0   :
_SB_.PCI0.SBRG.EC0_.TAH1   :
_SB_.PCI0.SBRG.EC0_.ST00   :
_SB_.PCI0.SBRG.EC0_.SC01   :
_SB_.PCI0.SBRG.EC0_.SC02   :
_SB_.PCI0.SBRG.EC0_.SC03   :
_SB_.PCI0.SBRG.EC0_.SC04   :
_SB_.PCI0.SBRG.EC0_.SC05   :
_SB_.PCI0.SBRG.EC0_.SC06   :
_SB_.PCI0.PIB_.EC0_.TCRT   :
_SB_.PCI0.SBRG.EC0_.CTPM   :
_SB_.PCI0.SBRG.EC__.CPUT   :
_SB_.PCI0.SBRG.EC__.SYST   :
_SB_.PCI0.LPC_.EC0_.CTMP   :
_SB_.PCI0.LPCB.EC0_.CTMP   :
_SB_.PCI0.LPC_.EC0_.TMP1   :
_SB_.PCI0.LPC_.EC0_.TMP2   :
_SB_.PCI0.LPC_.EC0_.TMPI   :
_SB_.PCI0.LPC_.EC0_.TMPV   :
_SB_.PCI0.LPCB.EC0_.A1TP   :
_SB_.PCI0.LPCB.EC0_.A2TP   :
_SB_.PCI0.LPCB.EC0_.FAN0   :
_SB_.PCI0.LPCB.EC__.TS1R   :
_SB_.PCI0.LPCB.EC__.TS2R   :
_SB_.PCI0.LPCB.EC__.TS3R   :
_SB_.PCI0.LPCB.EC__.F1FL   :
_SB_.PCI0.LPCB.EC__.F1FH   :
_SB_.PCI0.LPCB.EC__.F2FL   :
_SB_.PCI0.LPCB.EC__.F2FH   :
_SB_.PCI0.LPC_.H8EC.RTMP   :
_SB_.PCI0.LPC_.H8EC.LTMP   :
_SB_.PCI0.LPC_.H8EC.MTMP   :
_SB_.PCI0.LPC_.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.CTMP   :
_SB_.PCI0.LPCB.H8EC.DTMP   :
_SB_.PCI0.LPCB.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.ITMP   :
_SB_.PCI0.LPCB.H8EC.MTMP   :
_SB_.PCI0.LPCB.H8EC.STMP   :
_SB_.PCI0.LPCB.H8EC.PFAN   :

Here you can see (Intel) PCH Temperature:

adjPWGi6.jpg acbYygov.jpg

I can even see Battery Voltage :rolleyes:

Share this post


Link to post
Share on other sites

We've fine-tuned the PCH temperature measurement in the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild2063yt8p6wrjlmzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

As for VBAT voltage, AFAIK your motherboard is not capable of measuring that. You can verify that by checking out the PC Health Status page in the BIOS Setup, or the voltage readings in Gigabyte EasyTune6.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Thanks for the feedback. Even if other software reads "a value" as VBAT, it doesn't make it a valid reading if your motherboard doesn't seem to measure that voltage rail.

Share this post


Link to post
Share on other sites

And any chance to see each CPU core clock separately like their temps? :(

Maybe, sometimes in the future ;)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...