7 replies to this topic

[Garfunkel]

Sensor Type: Winbond W83627DHG-P (ISA A10h)
Motherboard Name: Emaxx EMX-MCP61M-iCafe

• CPU VID and North Bridge VID not shown (I saw it on System Stability test)
• North Bridge VID Shows same value in Chip Voltage in BIOS…(just for info)
• Wrong value in +12V based on BIOS
• DRAM Voltage missing, I saw it on BIOS, so i think you can show it

Also just for sudgestion of using specific fix within the main application…
try this pattern…

• on Aida Load or Startup, Check for a file or RegKey that stores the sensor information, addreses or script
• If null or missing then load a DLL (a extension that stores all of the specific fix) then save all required information on a file or RegKey.
• If have then read the data. (do not load the dll that stores specific fix, just set all data to a variable)

I think it will make aida64 use less memory and speedup loading
also integrate the "Correction" on that file or RegKey.

[Fiery]

CPU VID and NB VID are shown on the Computer / Overclock page. They aren't measured values, but detected values, hence they don't fit on the Sensor page.

DRAM Voltage can only be shown if it is a sensor reading. Did you see that value on the PC Health Status or HW Monitor page in the BIOS Setup?

I'm sorry, but we have no plans on making a DLL or other component just to read sensor information. Compared to how much system memory modern computers have (typically 2GB or more), the memory footprint of AIDA64 is negligible (less than 1 or 2 percent).


Regards,
Fiery

[Garfunkel]

I saw the DRAM Voltage in BIOS/Power/PC Health with fan speeds, temperatures and voltages…
BIOS: "AMI BIOS"
…
Thanks

[Fiery]

I saw the DRAM Voltage in BIOS/Power/PC Health with fan speeds, temperatures and voltages…
BIOS: "AMI BIOS"

Thank you. Please note down all voltage values you can see on the PC Health Status page in the BIOS Setup, and copy the values here.

Also, please start AIDA64, right-click on the bottom status bar of its main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic.


Thanks,
Fiery

[Garfunkel]

CPU = 1.368
3.3V = 3.408
+12V = 12.460
DRAM = 1.968
Chip = 1.264
+5V = 5.248
VBAT = 3.315
________________________________

------[ AIDA64 v2.20.1847 Beta ]------
------[ Microsoft Windows 7 Ultimate 6.1.7601 Service Pack 1 (32-bit) ]------
------[ Motherboard Info ]------
Motherboard ID : 64-0100-000001-00101111-012011-ATHLON64$C61111A0_BIOS DATE: 01/20/11 09:44:57 VER: 08.00.15 EMX-MCP61M-ICAFE BIOS V1.2
Motherboard Model : Emaxx EMX-MCP61M-iCafe
Motherboard Chipset : nVIDIA nForce 6100-430, AMD K10
DMI MB Manufacturer : Emaxx Technologies, Inc
DMI MB Product : EMX-MCP61M-iCafe
DMI MB Version : V1.1
DMI MB Serial :
DMI SYS Manufacturer: To Be Filled By O.E.M.
DMI SYS Product : To Be Filled By O.E.M.
DMI SYS Version : To Be Filled By O.E.M.
DMI SYS Serial : To Be Filled By O.E.M.
DMI BIOS Version : 080015
ITE 87xx Port = 00h
ITE 87xx HWMonitor Port = 0000h
ITE 87xx Device ID = 0000h
ITE 87xx Version = 00h
Winbond SuperIO Port = 2Eh
Winbond SuperIO HWMonitor Port = 0A10h
Winbond SuperIO Device ID = B073h
Winbond Sensor ID A3/5C/reg$58 = A3 / 5C / C1
Fintek SuperIO Port = 00h
Fintek SuperIO HWMonitor Port = 0000h
Fintek SuperIO Device ID = 0000h
LPC47 SuperIO HWMonitor Port = 0000h
LPC47 SuperIO Device ID = FFFFh
------[ LM78 ISA Sensor Device at 0A10 ]------
0000 04 FF 04 FF 01 00 00 00 01 01 01 01 3C 3C 0A 0A
0010 04 FF 00 00 00 01 01 3C 43 17 00 00 25 FF FF DC
0020 AB EB D5 D5 7B 9E CC 1B 51 35 FF DA 00 12 02 80
0030 83 4E 08 00 9B 90 66 05 E8 2F A2 23 18 20 C9 FF
0040 03 CE 10 FF FF 00 3F F5 2D 00 00 C4 90 95 00 A3
0050 FF FF 00 FF FF FF 00 80 C1 FF FF FF 19 85 04 05
0060 04 7F 40 00 01 01 3C FF 01 FF 01 FF FF FF FF 00
0070 00 00 00 00 00 0E 7F 7F 7F 7F 7F 7F 00 1B FF FF
0080 04 FF 04 FF 01 00 00 00 01 01 01 01 3C 3C 0A 0A
0090 04 FF 00 00 00 01 01 3C 43 17 00 00 25 FF FF DC
00A0 AB EB D5 D5 7B 9E CC 1B 51 35 FF DA 00 12 02 80
00B0 83 4E 08 00 9B 90 66 05 E8 2F A2 23 18 20 C9 FF
00C0 03 00 10 FF FF 00 3F F5 2D 00 00 C4 90 95 00 A3
00D0 FF FF 00 FF FF FF 00 80 C1 FF FF FF 19 85 04 05
00E0 04 7F 40 00 01 01 3C FF 01 FF 01 FF FF FF FF 00
00F0 00 00 00 00 00 0E 7F 7F 7F 7F 7F 7F 00 1B FF FF
0027 0150 0250 007D 007E
T: 27 29 16 27 255
T: 27 29 16 27 255
T: 27 29 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
T: 27 28 16 27 255
Bnk0 FF FF 00 FF FF FF 00 80 C1 FF FF FF 19 85 04 05
Bnk1 1D 00 00 4B 00 50 01 FE 00 00 00 00 00 00 0E FF
Bnk2 10 80 00 4B 00 50 1B 50 FF FF FF FF FF FF FF FF
Bnk3 05 07 01 05 03 06 03 06 05 00 00 30 26 0E 00 00
Bnk4 3B 13 FF 00 F4 F3 F0 0E 4C CE 1D BB 09 60 20 7F
Bnk5 D3 C3 00 FF 54 0E BA EA 0E 8D 00 00 00 00 00 00
Bnk6 08 3D 0C AD 00 29 00 29 00 29 0D FF FF FF FF FF
Reg$20 CPU Core: r = 171, r*0.016 = 2.74
Reg$21 CPU Aux: r = 235, r*0.016 = 3.76
Reg$22 +3.3 V: r = 213, r*0.016 = 3.41
Reg$23 +5 V: r = 213, r*0.016 = 3.41
Reg$24 +12 V: r = 123, r*0.016 = 1.97
Reg$25 -12 V: r = 158, r*0.016 = 2.53
Reg$26 -5 V: r = 204, r*0.016 = 3.26
------[ ACPI Temperatures & Fans ]------
_TZ_.THM0._TMP :
_TZ_.THM1._TMP :
_TZ_.THR0._TMP :
_TZ_.THR1._TMP :
_TZ_.TZ00._TMP :
_TZ_.TZ01._TMP :
_TZ_.RTMP :
_TZ_.RFAN :
_TZ_.RFAN(0) :
_TZ_.RFAN(1) :
_SB_.ATKD._HID :
_SB_.ATKD.TMPR :
_SB_.PCI0.LPC0.EC0_.CCTV :
_SB_.PCI0.LPC0.EC0_.LRPM :
_SB_.PCI0.LPC0.EC0_.HRPM :
_SB_.PCI0.SBRG.EC0_.ECPU :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0 :
_SB_.PCI0.SBRG.EC0_.TAH1 :
_SB_.PCI0.SBRG.EC0_.ST00 :
_SB_.PCI0.SBRG.EC0_.SC01 :
_SB_.PCI0.SBRG.EC0_.SC02 :
_SB_.PCI0.SBRG.EC0_.SC03 :
_SB_.PCI0.SBRG.EC0_.SC04 :
_SB_.PCI0.SBRG.EC0_.SC05 :
_SB_.PCI0.SBRG.EC0_.SC06 :
_SB_.PCI0.PIB_.EC0_.TCRT :
_SB_.PCI0.SBRG.EC0_.CTPM :
_SB_.PCI0.SBRG.EC__.CPUT :
_SB_.PCI0.SBRG.EC__.SYST :
_SB_.PCI0.LPC_.EC0_.CTMP :
_SB_.PCI0.LPCB.EC0_.CTMP :
_SB_.PCI0.LPC_.EC0_.TMP1 :
_SB_.PCI0.LPC_.EC0_.TMP2 :
_SB_.PCI0.LPC_.EC0_.TMPI :
_SB_.PCI0.LPC_.EC0_.TMPV :
_SB_.PCI0.LPCB.EC0_.A1TP :
_SB_.PCI0.LPCB.EC0_.A2TP :
_SB_.PCI0.LPCB.EC0_.FAN0 :
_SB_.PCI0.LPCB.EC__.TS1R :
_SB_.PCI0.LPCB.EC__.TS2R :
_SB_.PCI0.LPCB.EC__.TS3R :
_SB_.PCI0.LPCB.EC__.F1FL :
_SB_.PCI0.LPCB.EC__.F1FH :
_SB_.PCI0.LPCB.EC__.F2FL :
_SB_.PCI0.LPCB.EC__.F2FH :
_SB_.PCI0.LPC_.H8EC.RTMP :
_SB_.PCI0.LPC_.H8EC.LTMP :
_SB_.PCI0.LPC_.H8EC.MTMP :
_SB_.PCI0.LPC_.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.CTMP :
_SB_.PCI0.LPCB.H8EC.DTMP :
_SB_.PCI0.LPCB.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.ITMP :
_SB_.PCI0.LPCB.H8EC.MTMP :
_SB_.PCI0.LPCB.H8EC.STMP :
_SB_.PCI0.LPCB.H8EC.PFAN :
------[ nVIDIA THERM Fan ]------
Initial : 00 (0 ms)
Step 5 : 00 (15 ms)
Step 5 : 00 (15 ms)
Step 5 : 00 (31 ms)
Step 5 : 00 (46 ms)
Step 5 : 00 (46 ms)
Step 5 : 00 (62 ms)
Step 5 : 00 (78 ms)
Step 5 : 00 (78 ms)
Step 5 : 00 (93 ms)
Step 5 : 00 (109 ms)
Step 10 : 00 (109 ms)
Step 10 : 00 (124 ms)
Step 10 : 00 (140 ms)
Step 10 : 00 (140 ms)
Step 10 : 00 (156 ms)
Step 10 : 00 (171 ms)
Step 10 : 00 (171 ms)
Step 10 : 00 (187 ms)
Step 10 : 00 (187 ms)
Step 10 : 00 (202 ms)
Step 50 : 00 (249 ms)
Step 50 : 00 (296 ms)
Step 50 : 00 (358 ms)
Step 50 : 00 (405 ms)
Step 50 : 00 (452 ms)
Step 50 : 00 (499 ms)
Step 50 : 00 (561 ms)
Step 50 : 00 (608 ms)
Step 50 : 00 (655 ms)
Step 50 : 00 (702 ms)
Step 100: 00 (811 ms)
Step 100: 00 (904 ms)
Step 100: 00 (998 ms)
Step 100: 00 (1107 ms)
Step 100: 00 (1201 ms)
Step 100: 00 (1310 ms)
Step 100: 00 (1404 ms)
Step 100: 00 (1497 ms)
Step 100: 00 (1606 ms)
Step 100: 00 (1700 ms)
Step 200: 00 (1903 ms)
Step 200: 00 (2106 ms)
Step 200: 00 (2308 ms)
Step 200: 00 (2511 ms)
Step 200: 00 (2698 ms)
Step 200: 00 (2901 ms)
Step 200: 00 (3104 ms)
Step 200: 00 (3307 ms)
Step 200: 00 (3510 ms)
Step 200: 00 (3697 ms)

[Fiery]

Thank you. The voltages have been adjusted in the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.co...49h5q0sfmjptzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

[Garfunkel]

it works,
thank you…

[Fiery]

Thank you for the feedback