Loyd

check all items and the GeoForce font was selected

I am using remote sensor for the above RSLCD but the font does not hold. GeForce on the LCD item's screen and it looks like times roman on the rslcd browser screen which is on my display. and yes GeForce is loaded in windows

I was looking for memory sensors and I thought I saw a memory clock freq but when I was working with the arc function it did not show up but with the simple sensor it did. Then I checked if the sensor had a set value it would be in the selection list for simple but not for the arc....

as I said this is still a works in progress and I agree with your ideas and I should of screenshot with the gifs working. and I used GeForce fonts. What new feature? I found out that the selection table changes depending if you have a variable or set value.

I second that, doing a 100 image, or how about a 240 image, that is a lot of clicking. 15 is bad enough then you get in RSLCD with it's limited effects an arc, bar and a line graph is it no custom dials and stuff. That BMW panel you did was great some good ideas there. This my work in progress 1600X1200 RSLCD. the dial faces I got from someone on here, forgot who but thanks. I know it is kinda large but I am new to this file transfer stuff lucky I got it on here 1600X1200.rslcd

could someone do this in English. looks like a great way to custom a LCD panel

the fan control program uses a plugin to interface the razer with FC. The razer does not commutate naturally with FC, It needs this plug in. there are a lot of plug ins available for all sorts of items on the FC github site. have fun.

Would it be possible to make it so one could read the fans' speed in 64 from "fan control". be nice so we could get the fans 64 does not pick up for what ever reason but "fan control" does like running thru a fan hub

It is called Razer PWM fan controller, (Amazon) from the comments razer support doesn't support it very well. It plugs into a MOBO usb port and a sata port for power then runs it own software to control fans. when running "fan control" I set all other fan controls to 50% then "fan control" can run them to 0 up to 100 works great. If you can get this to inface with 64 it would be great

Yes, fan control not only monitors it controls them by curves you set up. these fans in my case are directly connected to the mobo, to a razer 8 port hub, and a asus 5700 xt GPU. it works all 12 fans and it seems to use very little resources. Aida64 only monitors mobo connected fans try it

I found the problem. I had put in a splitter on that fan and the splitter did not have the proper wiring once removed speed reporting was back. I did look in the bios and sys_fan1 was not reporting but i could see it was working and I could change the speed, then I remembered the splitter. On an another note how can i get input from a program called Fan control. would be nice to be able to use that to display the fans' speed. thanks for all the trouble great program

here is the requested fil isasensordump.txt

i just figured it out the key is aida64 remote sensor like you said, I read it again!! i really like this program, works slick and it is possible to have more than 1 running at the same time. Good Job

yes i understand that, and before you made this nice panel and the changes were made in code I know that. but what if I don't what to use the default and want a different panel than what is in the url. how to I change the panel in the url or find out what url to change to for a different panel

I guess my real question how do I know what URL to put in the selections box?

With the update I no longer have chassis 1 fan, just CPU, CPU OPT and GPU ( only one of the 2). I have rebooted no change. as 64 only reports 3 out of my 10 fans, the others go thru a razer controller, That is a quarter of the reportable fans. Like to have them back,,,Gigabyte B760i ddr4 mini-ITX system board with an i5-12600KF CPU, ASUS RX 5700 XT GPU

How do I pick which url I can use or can I pick? This is working pretty good

I got it to work and have two panels loaded a 1024x600 and 1600x1200. Have yet to see what kind of resources 9memory and such) they take but it is pretty neat. also found out you load more than one copy of rslcd but as i only have two screens so I could not get it to load on the monitor but I do have anther screen I will have to try to have a third just because. fun and games thanks again for your help

so it is not a easy load of other panels i will give that a go thanks for all you help

rt click does not change the pointer, does not allow importing of anything. think I am missing one link or something. saw a post of what is needed but can not find it now. is the maker of this program still around?

trying to get RSLCD to and I finally got a frame on the monitor but I cannot load a .png or any other file. All I can do is move it around attached is the message I get. TIA

how do you get the gifs to work? like in the red panel or the above panel

superfrog, you still on here, really like your panel and how you displayed the info. any way i can get it?

well it works. I copied a custom gauge from one panel, swapped panels, pasted, saved and there it was, in the list to be modified and it worked i.e. moved. but it only works if the gauge is a full custom. found a few that were only pointers and dial was an image. I cannot think of how much work went in those panels. labor of love I guess. got another question, know of any way to get more sensors into aida64? for some reason it has dropped some of my fans. They used to be there. This is great having someone who know a lot about this very complex program who actually answers questions. If I may where are you located, I am in the very cold state of Vermont 19 F with snow have a great day and TIA