Jump to content

Fiery

Administrators
 View Profile  See their activity

  • Posts

    12428

  • Joined

  • Last visited

  • Days Won

    554

 Content Type 

Everything posted by Fiery

  1. Fiery
    We will of course make sure to implement full support for the new Turing 8-inch screens as well. And quickly 🙂
  2. Fiery
    It can only be remedied in case Turing provides a firmware update for their screens that would fix this issue. But I don't think the firmware can be updated on Turing screens at all
  3. Fiery
    The firmware of the latest Turing screens is quite peculiar when it comes to how they update frames. Once the size of the image toe be sent to the display becomes too large, AIDA64 has to cut it in half to make sure the firmware can "digest" the data. So as your layout becomes more complex, the rendered image may cross over the threshold and would mean that it sadly has to be sliced up to make it work with the firmware.
  4. Fiery
    Thank you for your feedback, it looks awesome! Unfortunately it's not possible currently to use different rotation setting for different Turing screens. We will unlock that possibility in a future update to AIDA64.
  5. Fiery
    Thank you! Please check the latest AIDA64 beta update on your 9.2-inch Turing screen: https://www.aida64.com/downloads/latesta64xebeta
  6. Fiery
    I'm not sure why that would be useful. Can you please explain the benefits or usage scenario of having the full list of timings?
  7. Fiery
    The title of the original Aliexpress listing is deeply misleading...
  8. Fiery
    Yes, we've removed the redundand entries. So in the latest version we only show the best timing step for any given clock frequency setting.
  9. Fiery
    It's under NDA, so I cannot share
  10. Fiery
    Quite frankly we use the formula provided by MSI, but it looks strange so it may not be how we've interpreted it the first time we've implemented it. That's why we've asked them for clarification and a more detailed explanation on the formula they provided. We will make sure to fix it in case it requires adjustment.
  11. Fiery
    Thank you for your detailed feedback and test runs! We've contacted MSI to clarify and also to assist us in resolving this issue. When comparing the measured values, please note that the UEFI Setup uses a different measurement unit than AIDA64. The UEFI Setup shows the water flow reading in L/M (Litres per Minute) while AIDA64 uses the LPH unit (Litres per Hour). So there should be a 60x difference (60x ratio) between the two values.
  12. Fiery
    Could be that too...
  13. Fiery
    It's more complicated than that. The OpenCL layer is multiple files plus Registry entries, and everything has to be correctly configured for the whole chain to work properly. Try to do a complete reinstall of ForceWare drivers to make it work.
  14. Fiery
    Thank you! That's a screen that we've never seen before. It's currently not supported by AIDA64, and unless we can figure out how it works, I cannot make any promises about supporting it at this time.
  15. Fiery
    In case the screen appears as a secondary monitor under Windows, then you can simply use the SensorPanel feature of AIDA64. Otherwise, please send us an USB Dump to see what the screen is all about. In AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Thanks, Fiery
  16. Fiery
    Where did you acquire those screens from? Please post an USB Dump of both screens: in AIDA64 please press Ctrl+D --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Thanks, Fiery
  17. Fiery
    Please send me the EDID block of the system in email. If you have no tools to dump the EDID or don't know my email address, then please drop me a private message.
  18. Fiery
    No, it's not possible to use skins for the OSD Panel. If you need deep customizations, just use the SensorPanel module of AIDA64 instead of the more basic (but much easier to use) OSD Panel.
  19. Fiery
    Thank you! We've checked Lian Li's website, and they mention that it is possible to use the display as a secondary monitor under Windows. In which case you can simply move the SensorPanel window to that screen and you wouldn't need to use the LCD facility of AIDA64.
  20. Fiery
    Thank you! I'm afraid since it seems almost impossible to acquire the HOF Panel III as a standalone test device, we cannot implement support for it. We'd need a sample in order to analyze how it works.
  21. Fiery
    Thank you! We've fixed the issue in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta
  22. Fiery
    It is available now Make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works.
  23. Fiery
    Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works.
  24. Fiery
    We've fixed the issue in the latest AIDA64 beta update available at: https://www.aida64.com/downloads/latesta64xebeta Let me know how it works.
  25. Fiery
    Thank you! We're working on implementing support for the OLED screen of the ROG Azoth keyboard.
×
×
  • Create New...