KaTooMaz

Hey Grimm, My brain's not really in the game this morning so I'm not really sure what you're saying....exactly, no USB PSU for me. I had originally come here to see if there was some resolution to the issue of Aida not seeing any of my Corsair AIO data after Corsair's software update to v4.xx. Especially the water temp because I've always run all my fans based on that temp. I never found a resolution here and the staff over at Corsair were basically downright hostile. They pretty much told me it's impossible, it has never worked, never will work and to go pound sand with wanting Aida/Corsair to 'get along'. I have since just bypassed My AIO(Corsair) almost completely. I tapped into my radiator for water temps and am running the H2o temp sensor, all fans and pump rpm(data only) through the motherboard. Doing that allowed me to get back all my info and sensor panel data. The only thing Corsair(software) is still doing is running the pump and some of the LED's. I virtually never touch the software anymore.

Also 4 months later.... Been using Aida64 and sensor panel about 3-4 months now. Hasn't given me any trouble until about the start of November. I don't have the exact same issue but the past couple weeks when I right click on the sensor panel to pull up the manager so I can edit it, it just 'dings', as if I already have an Aida64 or sensor panel window open. Then, if I simply try and exit/close Aida64 I get a BSOD. The only 'fix' I've found is not manually try to close Aida and just reboot. I installed iCUE V.4 the other day because they are not supporting V.3 anymore and lost all my Corsair iCUE/ComdrPro sensor data in Aida. It simply vanished from the Sensor Panel list of temp, fan items etc. That's what brought me here searching the forum. I've scoured iCUE and Aida for some setting that would make a difference, didn't find anything. There is a new setting in iCUE that talks about sharing data with other programs but there's nothing more specific than an 'allow' check box and checking it appears to have no change. I Installed Win11 on a prayer it might change things, it didn't, I'm at a loss. Of course I can use the sensor panel without the iCUE data but my h20 temp and fan speeds are pretty important. The new Corsair software has some good things going for it. I can put a lot of sensor data on the home screen and the older dashboard. But the sensors on the home screen are smaller and Corsair restricts them to a small area in the corner and you have to scroll to get to most of the gauges. Either way, iCUE home screen or dashboard, having the software opened up on a second monitor is not a replacement for the (4" x 15" approx) Sensor Panel on one side of the second monitor that is specifically made for that spot. Plus, overall I can get more info from Aida and create better gauges.

Hey Fiery....Sorry if this is the wrong thread or post for this. I've been searching the interwebs and Aida64 forum for the past hour or so and can't find any info. No, I haven't gone to the Corsair forums yet but only because they are usually not worth a damn. I'll probably head over there after posting this but I'm doubtful it will be fruitful. Anyhow, I've been using a Sensor Panel for a few months now. I was able to read the water temps and fan speeds from my Corsair setup via iCUE V.3 along with other fan and sensor data connected to a Commander Pro (all while iCUE was running also btw). I have held off updating as long as I could but Corsair is pretty much forcing everyone into V.4, no updates for a long time now and no future support for V.3, so I went ahead and installed V.4 the other day. Sure enough, I lost all the sensors for anything Corsair-iCUE related in Aida64. I went ahead and did the Win11 upgrade that I've also been holding off hoping that might make some difference and have scoured both programs for some sort of setting that might help...no luck. Would you happen to know anything about it or if there is anyway to get it back? Thanks in advance....