The_Immortal Posted March 31, 2013 Share Posted March 31, 2013 Hi there! Guys, could you tell me please is it possible to identify what SATA revision is used on a notebook via AIDA64? Thank you! Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 1, 2013 Share Posted April 1, 2013 The current SATA revision used by your HDD/SSD drives is displayed on the Storage / ATA page of AIDA64. Regards, Fiery Quote Link to comment Share on other sites More sharing options...
The_Immortal Posted April 1, 2013 Author Share Posted April 1, 2013 Fiery, I meant SATA revision on a motherboard because Storage / ATA shows the maximum of SATA revision which support HDD/SSD. For example, it shows for my SSD "SATA-III" though my motherboard support only SATA-I. So it's not the current revision. Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 1, 2013 Share Posted April 1, 2013 I'm sorry for the misunderstanding. What you're looking for is AFAIK cannot be detected under Windows. 1 Quote Link to comment Share on other sites More sharing options...
tammylleanne Posted May 19, 2013 Share Posted May 19, 2013 Quote Link to comment Share on other sites More sharing options...
Squall Leonhart Posted May 1, 2019 Share Posted May 1, 2019 Fiery, the feature this user wanted is possible. The drive itself can report what SATA mode it is in, but not all do so and seems more likely when the Drive is Sata Rev3 / 6Gb with some exceptions being ODD's The utility SSD-Z implements it. Attached to Intel ICH10 sata Attached to Marvel SATA 6G Attached to JMI E-Sata Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 8, 2019 Share Posted May 8, 2019 On 5/1/2019 at 4:22 PM, Squall Leonhart said: Fiery, the feature this user wanted is possible. The drive itself can report what SATA mode it is in, but not all do so and seems more likely when the Drive is Sata Rev3 / 6Gb with some exceptions being ODD's The utility SSD-Z implements it. Attached to Intel ICH10 sata Attached to Marvel SATA 6G Attached to JMI E-Sata Thank you. We'll try to find out how can that tool do what it does. Quote Link to comment Share on other sites More sharing options...
Districtor Posted January 12, 2023 Share Posted January 12, 2023 Is this function implemented yet? I'm new to AIDA and searching for this very information, which is standard for CrystalDiskInfo. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.