Jump to content
AIDA64 Discussion Forum
Fyew-jit-tiv

AIDA64 not showing correct temps (Asus P7P55-M)

Recommended Posts

Hi Fierry,

I just installed Aida64 on my Home server (Asus P7P55-M Running win7 64bits & i3-550) and i just noticed the CPU temp & CPU FAN RPM isn't showing correctly. In the screen shot provided you will see the core temps @ around 36c but the CPU temp is at 43c which is incorrect. Core temps are OK (compared with HWmonitor & Coretemp)but the CPU temp is much higher than the core temps. Also the CPU fan rpm is showing at 479rpm but should be around 1900rpm. Can you confirm that this may well be a bug within Aida64.?

Thanks

P.S I am running the latest Version of Aida v1.50.1212

Share this post


Link to post
Share on other sites

Please compare the measured values against Asus' own hardware monitoring software called PC Probe II. If you can see any discrepancies there, please let me know.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Hi Fiery,

So i have installed ProbeII. Adia64 CPU temp matches ProbeII. What i find strange thou is (and correct me if I'm wrong)the core temps should be higher than the overall CPU temp? On my main Comp this is most certainly the case. ProbeII is on the other hand showing the correct CPU Fan RPM Speed whilst Aida is not. There seems to be 1000rpm's missing from Aida's readings. Screen shot inc. Compare with screen shot in OP.

Thanks.

Share this post


Link to post
Share on other sites

1) Core temperatures are measured by the CPU itself, using Intel DTS. "CPU" temperature is measured by the motherboard, using the sensor chip mounted on your motherboard. Due to the fundamental difference on measuring methodology, it's not advised to compare core temperatures and "CPU" temperature.

2) As for the fan RPMs, please copy-paste the results of the following dumps and info into this topic:

- Computer / Sensor page

- right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Hi Fiery,

Here is a strange one, under Aida64 stress test ProbeII shows -55 on the mobo temp sensor and Aida doesn't (Screen shot inc), This is why i don't use ProbeII as it is so not accurate. Another thing to note is whilst under stress testing my core temps will go up to 60c+ but the CPU temps only goes up to 49c, normally it would idle @ around 44c which cant be right. Going to do this dump and post back in 5.

Thanks

Share this post


Link to post
Share on other sites

Hi Fiery,

As requested here is the sensordump. As you can see this is showing the correct CPU RPM, But else where in Aida64 is doesn't.

Thanks

------[ AIDA64 v1.50.1212 Beta ]------

------[ Microsoft Windows 7 Home Premium 6.1.7600 (64-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 65-0903-000001-00101111-070910-P55$A1482001_BIOS DATE: 07/09/10 10:30:04 VER: 08.00.15

Motherboard Model : Asus P7P55-M

Motherboard Chipset : Intel Ibex Peak P55, Intel Ironlake

DMI MB Manufacturer : ASUSTeK Computer INC.

DMI MB Product : P7P55-M

DMI MB Version : Rev X.0x

DMI MB Serial : MT7006K29700217

DMI SYS Manufacturer: System manufacturer

DMI SYS Product : System Product Name

DMI SYS Version : System Version

DMI SYS Serial : System Serial Number

DMI BIOS Version : 0903

ITE 87xx Port = 00h

ITE 87xx HWMonitor Port = 0000h

ITE 87xx Device ID = 0000h

ITE 87xx Version = 00h

Winbond SuperIO Port = 2Eh

Winbond SuperIO HWMonitor Port = 0290h

Winbond SuperIO Device ID = B353h

Winbond Sensor ID A3/5C/reg$58 = A3 / 5C / C1

Fintek SuperIO Port = 00h

Fintek SuperIO HWMonitor Port = 0000h

Fintek SuperIO Device ID = 0000h

LPC47 SuperIO HWMonitor Port = 0000h

LPC47 SuperIO Device ID = FFFFh

------[ LM78 ISA Sensor Device at 0290 ]------

0000 04 FF 04 56 10 3C 32 22 9B 80 01 01 3C 3C 04 04

0010 04 FF 30 00 00 01 01 3C 53 27 00 00 27 FF FF CA

0020 99 DB D0 D0 D5 FF 26 C9 58 7A FF DA 00 99 9F F4

0030 E3 4B 56 EA F3 EE FA 1C 4B D4 53 90 05 9F 89 FF

0040 01 10 10 FF DF 00 3F F3 2D 21 00 C0 88 95 00 A3

0050 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05

0060 FF FF 40 FF FF FF FF FF 0A FF 01 FF 01 FF FF FF

0070 04 04 0A 0A 00 64 4B 64 FF FF FF 1F 00 00 C9 00

0080 04 FF 04 56 10 3C 32 22 9B 80 01 01 3C 3C 04 04

0090 04 FF 30 00 00 01 01 3C 53 27 00 00 27 FF FF CA

00A0 99 DB D0 D0 D5 FF 26 C9 58 7A FF DA 00 99 9F F4

00B0 E3 4B 56 EA F3 EE FA 1C 4B D4 53 90 05 9F 89 FF

00C0 01 00 10 FF DF 00 3F F3 2D 21 00 C0 88 95 00 A3

00D0 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05

00E0 FF FF 40 FF FF FF FF FF 0A FF 01 FF 01 FF FF FF

00F0 04 04 0A 0A 00 64 4B 64 FF FF FF 1F 00 00 C9 00

Bnk0 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05

Bnk1 2C 00 00 4B 00 50 00 EA FF FF FF FF FF FF FF FF

Bnk2 4E 00 02 7D 00 7F 1E 54 FF FF FF FF FF FF FF FF

Bnk3 06 06 06 06 01 07 03 03 07 00 00 C0 63 01 00 00

Bnk4 39 13 FF 00 00 07 00 22 69 8E 1D B9 09 5F 20 FF

Bnk5 D5 72 03 FF 30 B1 74 65 B5 96 00 00 E4 00 00 00

Bnk6 7F 7F 7F 7F 7F 7F 07 7D 01 32 00 00 00 00 00 00

Reg$20 CPU Core: r = 153, r*0.016 = 2.45

Reg$21 CPU Aux: r = 219, r*0.016 = 3.50

Reg$22 +3.3 V: r = 208, r*0.016 = 3.33

Reg$23 +5 V: r = 208, r*0.016 = 3.33

Reg$24 +12 V: r = 213, r*0.016 = 3.41

Reg$25 -12 V: r = 255, r*0.016 = 4.08

Reg$26 -5 V: r = 38, r*0.016 = 0.61

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP :

_TZ_.THM1._TMP :

_TZ_.THR0._TMP :

_TZ_.THR1._TMP :

_TZ_.TZ00._TMP :

_TZ_.TZ01._TMP :

_TZ_.RTMP :

_TZ_.RFAN :

_TZ_.RFAN(0) :

_TZ_.RFAN(1) :

_SB_.ATKD._HID :

_SB_.ATKD.TMPR :

_SB_.PCI0.LPC0.EC0_.CCTV :

_SB_.PCI0.LPC0.EC0_.LRPM :

_SB_.PCI0.LPC0.EC0_.HRPM :

_SB_.PCI0.SBRG.EC0_.ECPU :

_SB_.PCI0.SBRG.EC0_.TACH(0):

_SB_.PCI0.SBRG.EC0_.TACH(1):

_SB_.PCI0.SBRG.EC0_.TAH0 :

_SB_.PCI0.SBRG.EC0_.TAH1 :

_SB_.PCI0.SBRG.EC0_.ST00 :

_SB_.PCI0.SBRG.EC0_.SC01 :

_SB_.PCI0.SBRG.EC0_.SC02 :

_SB_.PCI0.SBRG.EC0_.SC03 :

_SB_.PCI0.SBRG.EC0_.SC04 :

_SB_.PCI0.SBRG.EC0_.SC05 :

_SB_.PCI0.SBRG.EC0_.SC06 :

_SB_.PCI0.PIB_.EC0_.TCRT :

_SB_.PCI0.SBRG.EC0_.CTPM :

_SB_.PCI0.SBRG.EC__.CPUT :

_SB_.PCI0.SBRG.EC__.SYST :

_SB_.PCI0.LPC_.EC0_.CTMP :

_SB_.PCI0.LPCB.EC0_.CTMP :

_SB_.PCI0.LPC_.EC0_.TMP1 :

_SB_.PCI0.LPC_.EC0_.TMP2 :

_SB_.PCI0.LPC_.EC0_.TMPI :

_SB_.PCI0.LPC_.EC0_.TMPV :

_SB_.PCI0.LPCB.EC0_.A1TP :

_SB_.PCI0.LPCB.EC0_.A2TP :

_SB_.PCI0.LPCB.EC0_.FAN0 :

_SB_.PCI0.LPCB.EC__.TS1R :

_SB_.PCI0.LPCB.EC__.TS2R :

_SB_.PCI0.LPCB.EC__.TS3R :

_SB_.PCI0.LPCB.EC__.F1FL :

_SB_.PCI0.LPCB.EC__.F1FH :

_SB_.PCI0.LPCB.EC__.F2FL :

_SB_.PCI0.LPCB.EC__.F2FH :

_SB_.PCI0.LPC_.H8EC.RTMP :

_SB_.PCI0.LPC_.H8EC.LTMP :

_SB_.PCI0.LPC_.H8EC.MTMP :

_SB_.PCI0.LPC_.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.CTMP :

_SB_.PCI0.LPCB.H8EC.DTMP :

_SB_.PCI0.LPCB.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.ITMP :

_SB_.PCI0.LPCB.H8EC.MTMP :

_SB_.PCI0.LPCB.H8EC.STMP :

_SB_.PCI0.LPCB.H8EC.PFAN :

------[ Asus ATK0110 ]------

Motherboard ID: P7P55-M

ICPU/VCPU/PCPU: 780 / 0 / 15912

CPU Temperature : 44.0 C

MB Temperature : 42949667.4 C

CHASSIS1 FAN Speed: 1917 RPM

CPU FAN Speed : 1383 RPM

+12 Voltage : 12.264 V

+3.3 Voltage : 3.328 V

+5 Voltage : 5.112 V

Vcore Voltage : 1.224 V

CPU Temperature : 44.0 C

MB Temperature : 42949667.4 C

Chassis1 Fan Speed: 1917 RPM

CPU Fan Speed : 1383 RPM

+12V Voltage : 12.264 V

+3.3V Voltage : 3.328 V

+5V Voltage : 5.112 V

Vcore Voltage : 1.224 V

CPU Over Voltage : 0.030 V

CPU PLL : 1.800 V

DRAM Bus Voltage : 1.650 V

IMC Voltage : 1.100 V

PCH : 1.050 V

BCLK Frequency : 133.00 MHz

CPU rated ratio : 24x

CPU Ratio : 24x

So here we can see the correct CPU RPM

Share this post


Link to post
Share on other sites

Thank you for the dumps. We've tweaked a bit around the fan RPM measurement on Asus H55 and P55 boards. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild1219sdk6ngm0yczip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Thank you for the dumps. We've tweaked a bit around the fan RPM measurement on Asus H55 and P55 boards. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild1219sdk6ngm0yczip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

Thanks,

Fiery

Hi Fiery,

I can now confirm that the problem with CPU RPM has been fixed with build 1219.

I'm now re-install OS on P6X58D Comp and will let you know by the end of today if that makes any difference to the update freq

Thanks.

Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...