🚀 Introducing SynQPanel - A New Panel-Based Visualization Tool for AIDA64 Users

[GaHile]

@Surjeet @BHSY @Loyd

Hello Everyone,

I’m beyond excited to share that FlipClock is evolving beautifully - and it’s getting better every single day! 🚀✨

We’ve been working with passion to make it smoother, smarter, and more powerful than ever before. Here’s what’s coming next and currently being tested:

Full Flip Animation - now fully possible and more satisfying than ever.
Flexible Display Options - choose between full digits or single-digit flip style.
Effortless Setup - just provide the numbers 0-9 for single-digit mode, and let SynQPanel handle the magic for you.
Complete Customization Control - fine-tune spacing, adjust flip duration, add dynamic shadows, and even enhance it with stunning 3D lighting effects:

Every detail has been crafted to bring your displays to life with energy and elegance.

Now, get ready to see the magic in motion - Below are both styles in action:
Which one did you like?

 

 

[BHSY]

13 hours ago, GaHile said:

@Surjeet @BHSY @Loyd

Hello Everyone,

I’m beyond excited to share that FlipClock is evolving beautifully - and it’s getting better every single day! 🚀✨

We’ve been working with passion to make it smoother, smarter, and more powerful than ever before. Here’s what’s coming next and currently being tested:

Full Flip Animation - now fully possible and more satisfying than ever.
Flexible Display Options - choose between full digits or single-digit flip style.
Effortless Setup - just provide the numbers 0-9 for single-digit mode, and let SynQPanel handle the magic for you.
Complete Customization Control - fine-tune spacing, adjust flip duration, add dynamic shadows, and even enhance it with stunning 3D lighting effects:

Every detail has been crafted to bring your displays to life with energy and elegance.

Now, get ready to see the magic in motion - Below are both styles in action:
Which one did you like?

 

 

I prefer the one on the right; it feels more like a true flip mechanism. 👍

[GaHile]

Hi everyone (Thank you @BHSY),

I’d like to share something recently discovered while troubleshooting a system issue.

The Primary IP Address and External IP Address sensors appeared to cause instability with shared memory for most of the users. After disabling/unchecking these two sensors in the shared memory settings, everything returned to normal and the sensor statistics began responding correctly again.

This may not affect most users, but  it might be worth temporarily unchecking these two sensors to see if it helps.

Just sharing this in case it saves someone some troubleshooting time. 🙂

[Surjeet]

On 2/12/2026 at 11:59 PM, GaHile said:

Now, get ready to see the magic in motion - Below are both styles in action:
Which one did you like?

 

 

Yes, I agree to @BHSY, right one looks more mechanical and like real flip clock!!

[BHSY]

On 2/13/2026 at 8:55 PM, GaHile said:

Hi everyone (Thank you @BHSY),

I’d like to share something recently discovered while troubleshooting a system issue.

The Primary IP Address and External IP Address sensors appeared to cause instability with shared memory for most of the users. After disabling/unchecking these two sensors in the shared memory settings, everything returned to normal and the sensor statistics began responding correctly again.

This may not affect most users, but  it might be worth temporarily unchecking these two sensors to see if it helps.

Just sharing this in case it saves someone some troubleshooting time. 🙂

Updated my Realtek network adapter yesterday. Now, the Primary IP Address and External IP Address no longer cause the issue. It all started with the Windows latest update. Anyone facing this issue, please update your Network adapter to the latest driver version.

[moonsalini]

Dear bro,

Thank you very much for bring us such an amazing app like this. I like some animation in the sensor panel but Aida64 do not have it while others do have (Turzx, Trofeo Vision, etc,...). Therefore this app is a savior. Very great app.

At this moment, I have some issue with it. When I insert a video in the panel, it will flicker randomly. The larger the video, the more often it will happen. Do you have any solution? Or does it have the limitation such as the maximum resolution or bit rate?

[GaHile]

17 hours ago, moonsalini said:

Dear bro,

Thank you very much for bring us such an amazing app like this. I like some animation in the sensor panel but Aida64 do not have it while others do have (Turzx, Trofeo Vision, etc,...). Therefore this app is a savior. Very great app.

At this moment, I have some issue with it. When I insert a video in the panel, it will flicker randomly. The larger the video, the more often it will happen. Do you have any solution? Or does it have the limitation such as the maximum resolution or bit rate?

Thank you so much for your kind words and support - it truly means a lot. I’m really glad the animated sensor panel adds value for you. Especially when you mention it as a “savior” - genuinely motivates us to keep improving every day. Your support is deeply appreciated. 🙏

Regarding the video flickering: this is usually related to performance limits rather than a strict resolution or bitrate cap. Larger videos (higher resolution/bitrate) naturally consume more GPU/CPU resources, which can cause random flickering.

You may try the following steps:

1. Please check Settings > Performance > Target Frame Rate and try increasing it to see if it improves the smoothness.

2. Consider slightly reducing the video resolution or bitrate and test again.

3. Keep in mind that each screen has its own refresh rate and hardware limitations. If the display refresh rate is lower, or if many sensors, images, and animated elements are active simultaneously, it can affect playback smoothness and cause flickering.

In short, the more resources the panel uses (multiple sensors, high-resolution assets, animations, large videos), the heavier the load becomes - and this can sometimes impact video stability.

We are continuously optimizing the app and removing bugs one by one, and feedback like yours helps us improve further.

If possible, please share your panel resolution, display refresh rate, and video specs - I’ll be happy to look into it further. Are you facing such issues with all the panels or specific ones?

[moonsalini]

On 3/2/2026 at 7:46 PM, GaHile said:

Thank you so much for your kind words and support - it truly means a lot. I’m really glad the animated sensor panel adds value for you. Especially when you mention it as a “savior” - genuinely motivates us to keep improving every day. Your support is deeply appreciated. 🙏

Regarding the video flickering: this is usually related to performance limits rather than a strict resolution or bitrate cap. Larger videos (higher resolution/bitrate) naturally consume more GPU/CPU resources, which can cause random flickering.

You may try the following steps:

1. Please check Settings > Performance > Target Frame Rate and try increasing it to see if it improves the smoothness.

2. Consider slightly reducing the video resolution or bitrate and test again.

3. Keep in mind that each screen has its own refresh rate and hardware limitations. If the display refresh rate is lower, or if many sensors, images, and animated elements are active simultaneously, it can affect playback smoothness and cause flickering.

In short, the more resources the panel uses (multiple sensors, high-resolution assets, animations, large videos), the heavier the load becomes - and this can sometimes impact video stability.

We are continuously optimizing the app and removing bugs one by one, and feedback like yours helps us improve further.

If possible, please share your panel resolution, display refresh rate, and video specs - I’ll be happy to look into it further. Are you facing such issues with all the panels or specific ones?

After some adjustment and testing. Maybe I know the problems. Its because SynQ uses too much resources for running videos. For example, if I insert 1 video of 480x1280 resolution, 1k bitrates, it will load up to 30-35% CPU usage (Intel 12900HK) and 3-4 core will be push to 100% all the time. While playing such video on Potplayer for example will cause just 5% CPU usage. This is the cause of flickering to happen.

[GaHile]

@BHSY @Loyd

Hi Everyone!

I am excited to announce 🎤 that 🎉SynQPanel v1.0.4 is now available.🎉

 ❤️ So many New Things ❤️
 

Flip Clock Enhancements – Full Flap

(Please note that you one need images 0 to 9 with names 0 to 9 only to have the full new style full flap single digit clock)

Dual Rendering Styles

• Added Single Digit mode alongside classic Split-Flap
• Split-Flap: Full-width image sets (00–59) for traditional airport-style displays
• Single Digit: Independent digit animation using 0–9 assets

Synchronized Digit Logic

• Tens and ones flip in perfect sync during rollover (e.g., 19 → 20)
• Preserves realistic mechanical behavior

Visual Improvements

• 3D lighting and dynamic shading based on flip angle
• Real-time hinge and ambient depth shadows
• Smooth ease-in-out animation curves (replaces linear motion)

UI & Customization & Options

• Live interactive preview
• Smart auto-sizing for both single- and double-width assets
• Adjustable animation speed (Minutes / Hours)
• Shadow intensity and 3D lighting strength controls
• Redesigned, space-efficient properties panel

Import Validation

• Automatic image-set validation (0–9 vs 00–59) based on selected mode
• Prevents incomplete or mismatched configurations

---

System & Stability Improvements

Core Hardening

• Improved XML parsing to safely handle malformed or partial config files
• Hardened shared-memory IPC for improved long-running stability

Export Fix

• Fixed .sqx export modifying or omitting spzip configuration

---

Sensor & Weather Fixes

• CPU Fan: Prevented unexpected source switching
• Days of the Week: Corrected incorrect day image display
• 7-Day Forecast: Added extended forecast support
• Hourly Weather: Added hourly temperature and rain probability

---

Bug Fixes & Improvements:

• SynQPanel now waits for AIDA64 if it launches first and auto-connects when AIDA64 starts (no restart required)
• “Startup Delay” now correctly saves and updates the Windows Logon Task
• Wattage sensors retain decimal precision after .sqx import
• Fixed missing hourly weather icons and incorrect time display after re-importing deleted profiles
• Custom sensor unit spacing now mirrors AIDA64 formatting exactly (°C, °F, %)
• Fonts without explicit styling now default to Regular/Normal instead of Thin/Hairline
• TimeFlow absolute sensors now auto zero-pad to two digits (e.g., 05)
   

📢 Recommended update for all users. 

Thank you to the AIDA team and community for feedback, suggestions and logs that helped refine this release. 🙏

The update is available on GitHub here:  ENJOY 🎉

https://github.com/sursingh-hub/SynQPanel/releases/tag/v1.0.4

Feedback and suggestions are always welcome.   🙏  Thank you again for the support!   🙏

 

[GaHile]

2 hours ago, moonsalini said:

After some adjustment and testing. Maybe I know the problems. Its because SynQ uses too much resources for running videos. For example, if I insert 1 video of 480x1280 resolution, 1k bitrates, it will load up to 30-35% CPU usage (Intel 12900HK) and 3-4 core will be push to 100% all the time. While playing such video on Potplayer for example will cause just 5% CPU usage. This is the cause of flickering to happen.

Thank you!

I will look into it 👍

Hope you are not using or enabled OpenGPL Rendering for the panel.

[moonsalini]

2 hours ago, GaHile said:

Thank you!

I will look into it 👍

Hope you are not using or enabled OpenGPL Rendering for the panel.

Yes, I do not enable OpenGL rendering option because everything become smaller when enable it.